• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.599-602
• /
• 2010

음악 제작 과정의 마지막 단계는 마스터링이다. 과거의 마스터링은 단순히 컴프레서(Compressor)와 리미터(Limiter)를 이용하여 각 트랙의 오디오 레벨을 일률적으로 매칭시키는 것이었지만, 디지털 장비의 꾸준한 발전으로 많은 마스터링 제작자들은 이퀄라이저(Equalizer)와 컴프레서를 기본으로 리버브(Reverb), 딜레이(Delay), 그리고 디더(Dither)를 이용하여 모든 트랙을 하나의 통일된 분위기로 제작하는 방식으로 진보하고 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.5
• /
• pp.789-795
• /
• 2002

Color image is formed of combination of three color channels. Therefore its architecture is very complicated and it requires complicated image Processing for effective image segmentation. In this paper. we propose architecture of universalized Color Morphological Pyramids(CMP) which is able to give effective image segmentation. Image Pyramid architecture is a successive Image sequence whose area ratio $2^{\int}({\int}=1,2,....,N)$ after filtering and subsampling of input image. In this technique, noise removed by sequential filtering and resolution is degraded by downsampling using CMP in various color spaces. After that, new level images are constructed that apply formula using distance of neighbor vectors in close level images and segments its image. The feasibility of proposed method is examined by comparing with the results obtained from the existing method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.4
• /
• pp.504-511
• /
• 2012

In this paper, level instrument is implemented using beat frequency for distance measurement which means the difference between Tx and Rx signal frequency from FMCW Radar Level Transmitter. Beat frequency is analyzed through Fast Fourier Transform of which frequency precision can be improved by applying Zoom FFT. Distance precision is improved from 146.5[mm] to 5[mm] using the advantage of Zoom FFT which can raise the frequency precision without changing the sampling frequency or FFT point number to be fixed in the beginning of designing signal processing. Also, measurement error can be reduced within 2[mm] by incresing the FFT points using the method of Spline interpolation. For verifying the effectiveness of this Zoom FFT to FMCW Radar Level Transmitter, test bench is made to measure the distance for every 1[mm] between 700[mm] and 2000[mm] and measurement error can be checked in the range of ${\pm}2$[mm].

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.42-43
• /
• 2017

선내시스템 원격모니터링 서비스는 원격지 해역을 항행하고 있는 선박의 주요정보(화재, 경사, 탱크레벨, 기관 및 항해장비 등) 데이터를 이용하여 항행/화재/내항성 등의 선박의 이상상태를 감지하고, 이를 선박 운항자에게 서비스하는 시비스로서 선박 사용자와 육상의 이네비 센터 운용자가 효율적으로 이용할 수 있는 사용자 UI를 개발하고 있다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.109-111
• /
• 2004

본 논문에서는 LCD 디바이스의 프레임버퍼 모니터링에 기반한 소프트웨어 단계의 저전력 LCD 관리 기법을 제시한다. 제안하는 기법은 Refresh-rate를 조절하여 기존 하드웨어에서 추가설비 없이 사용 가능하며, 커널 레벨로 동작하여 어플리케이션의 수정이 필요 없으며, 프레임 버퍼 모니터링을 통해 디스플레이의 퀼리티 보장이 가능한 특징을 가진다. 본 시스템은 Linux 운영체제 하에서 실제 구현되고, 실험을 통해 제안하는 기법이 사용자의 디스플레이 퀼리티 요구를 만족시키면서 저전력 관리를 수행할 수 있음을 밝힌다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.225-226
• /
• 2009

최근 센서를 이용한 의료 분야로의 유비쿼터스 시스템 및 서비스 연구가 활발히 진행되고 있다. 그러나 의료 분야 서비스의 기본적 전제인 WBAN 환경에서의 기존의 모니터링 시스템은 매우 수동적이다. 이를 개선해 스트림 데이터에 대해 보다 효율적인 모니터링 시스템을 구축하기 위한, 우선 순위를 표현하기 위한 큐(Queue)와 각 속성에 대한 질의로 구성된 레벨 트리(Level Tree)로 이어지는 질의 색인 구조에 대해 논하고자 한다.

• Investigative Magnetic Resonance Imaging
• /
• v.4 no.2
• /
• pp.120-127
• /
• 2000

Adaptive template filtering has been proposed recently for enhancement of signal-to-noise ratio without loss of resolution. In the adaptive template filtering, an optimal template among multiple templates is selected, then linear least square error filtering based on the template is applied in vowel by vowel basis. In some magnetic resonance imaging, where the distribution of gray level has relatively small dynamic range, e.g., $T_1$ imaging, however, artificial stair-like artifact is observed at near edges. This is partially due to the edge enhancement effect in such yokels that contain multiple compounds at the boundaries of tissues. The gray levels of these yokels become similar gray levels of near dominant vowels that contain single compound by the adaptive filtering, which enlarges edge discontinuities. In this paper, we propose a technique to eliminate such artifact by identifying those yokels that contain multiple compounds and assigning the largest template for them. Filtered images with the proposed technique show substantial visual enhancement at the edges without degradation of peak signal-to-noise ratio compared to the original adaptive template filtering for both magnetic resonance images and phantom images.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1B
• /
• pp.42-47
• /
• 2000

A new method for stabilizing the bias of an Electro-Optic mach-Zehnder modulator has been developed to maximize the switching extinction ratio in burst mode packet traffic. By sampling and minimizing the off-level output power of the modulator, a high extinction optical gate switch in obtain regardless of the variation of the packet traffic density.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.1
• /
• pp.197-204
• /
• 2005

Multipurpose Floor Level Joint(MFLJ) is a new construction technology system which was developed in domestic. By using this system, it is possible not only to absorb the deformation at expansion joint due to shrinkages of concrete but also to make ease the floor leveling during the concrete casting at floor. The system consists of two elements, supporting devices and rails. Their structural capacities were verified through several experimental programs, such as compressive strength test of support and bending test of rail. The purpose of this paper is to evaluate the deformation absorbing capacity of the floor level joint. An experimental work was carried out to simulate the deformation condition at the joint and the test result was analyzed and evaluated. In addition, FEM analysis for expansion joint of typical building was also performed to predict the real behavior of MFLJ. The test results showed that MFLJ has sufficient deformation capacity required to act as expansion joint.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.19 no.5
• /
• pp.706-712
• /
• 2009

In this paper, a fault diagnosis method is proposed to detect and classifies faults that occur in press process line. An oil level automatic monitoring method is also presented to detect oil level. The FFT(fast fourier transform) frequency analysis and ART2 NN(adaptive resonance theory 2 neural network) with uneven vigilance parameters are used to achieve fault diagnosis in proposing method, and GUI(graphical user interface) program for fault diagnosis and oil level automatic monitoring using LabVIEW is produced and fault diagnosis was done. The experiment results demonstrate the effectiveness of the proposed fault diagnosis method of induction motors and oil level automatic monitor system.