• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.493-499
• /
• 2013

For the purpose of utilizing fly ash from gasification of low rank coal, we performed the series of experiments such as pyrolysis and char-$CO_2$ gasification on fly ash by using the thermogravimetric analyzer (TGA) at non-isothermal heating conditions (10, 20 and $30^{\circ}C/min$). Pyrolysis rate has been analyzed by Kissinger method as a first order, the reliability of the model was lower because of the low content of volatile matter contained in the fly ash. The experimental results for the fly ash char-$CO_2$ gasification were analyzed by the shrinking core model, homogeneous model and random pore model and then were compared with them for the coal char-$CO_2$ gasification. The fly ash char (LG coal) with low-carbon has been successfully simulated by the homogeneous model as an activation energy of 200.8 kJ/mol. In particular, the fly ash char of KPU coal with high-carbon has been successfully described by the random pore model with the activation energy of 198.3 kJ/mol and was similar to the behavior for the $CO_2$ gasification of the coal char. As a result, the activation energy for the $CO_2$ gasification of two fly ash chars don't show a large difference, but we can confirm that the models for their $CO_2$ gasification depend on the amount of fixed carbon.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.11
• /
• pp.69-76
• /
• 2008

Safety-related messages are propagated in form of broadcasting among vehicles in vehicle safety communication. There is the broadcast storm problem in high density vehicle environments. To solve this problem, a distance-based broadcast scheme has been proposed. It causes a serious problem such as retransmission delay in low density vehicle environments since it requires additional defer time to rebroadcast messages. This paper proposes a distance and random-based broadcast scheme. The proposed scheme selects a random time from zero to the defer time that estimated depending on the distance between sending and receiving vehicles. Simulation results show that the proposed scheme requires shorter defer time and less rebroadcasting message than existing schemes.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.4
• /
• pp.106-113
• /
• 2008

본 논문에서는 유한용량 재진입 생산라인에서의 스케줄링 문제에 대한 유전자적 접근 방법을 제안하였다. 알고리즘에서 사용되는 염색체의 구조는 워크스테이션의 버퍼레벨에 대한 모든 가능한 경우를 고려하여 정의되었으며, 염색체의 각 유전자에는 그에 대응되는 시스템 상태에서 우선 순위를 갖는 작업 단계의 값이 할당되도록 하였다. 또한, 제안된 알고리즘의 구현 방법으로서 워크스테이션의 버퍼와 프로세싱 자원을 할당할 때 작업 간 우선 순위를 고려하는 동시에 각 워크스테이션의 로컬 유휴 상태를 지양하는 우선순위 기반 랜덤화 정책 알고리즘을 제안하였다. 실험을 통하여 제안된 알고리즘의 성능을 평가하였으며, 기존에 무한용량 재진입 생산라인 스케줄링 문제에 많이 이용되었던 휴리스틱과 비교하여 보다 효율적임을 보였다.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2006.07a
• /
• pp.269-269
• /
• 2006

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.3
• /
• pp.133-140
• /
• 2018

This paper is concerned with the 2-D micostructure generation for $Ni-A{\ell}_2O_3$ dual-phase composite materials and the numerical analysis of mechanical characteristic of hierarchical models of microstructure which are defined in terms of the scale of microstructure. The microstructures of dual-phase composite materials were generated by applying the mathematical RMDF(random morphology description functions) technique to a 2-D RVE of composite materials. And, the hierarchical models of microstructure were defined by the number of Gaussian points. Meanwhile, the volume fractions of metal and ceramic particles were set by adjusting the level of RMD functions. The microstructures which were generated by RMDF technique are definitely random even though the total number of Gaussian points is the same. The randomly generated microstructures were applied to a 2-D beam model, and the variation of normal and shear stresses to the scale of microstructure was numerically investigated. In addition, through the crack analyses, the influence of RMDF randomness and Gauss point number on the crack-tip stress is investigated.

• Composites Research
• /
• v.24 no.2
• /
• pp.14-21
• /
• 2011

In this paper, a dynamic model is proposed for multi-axis optical structure of an aircraft. Modal analysis, sine-wave analysis, and random vibration analysis are done using a multi-body dynamic program for the multi-axis optical structure. By applying Al 6061-T6 and two types of CFRP to the camera module, x, y, and z responses are found and compared according to each axis excitation. The results will be used for reducing the weight of the camera module.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.04a
• /
• pp.157-163
• /
• 2000

The application as the parts of an automobile, using the property of GMT-Sheet, is increasing. In order to exchange the parts of an automobile for GMT-Sheet, at first, the establishment and joining problem of exact joining strength must be determined. We have studied it using composites which is not same each other fiber oriented condition so as to determine joining strength and joining condition of GMT-Sheet. In this study, the result of experiment of forming condition concerned joining problem of GMT-Sheet is this ; joining efficiency of GMT-Sheet, increases as lap joint length L increases. Increase of compression ration cause decrease of joining efficiency after of GMT-Sheet, joining. In the viewpoint of recycling, randomly oriented composite of GMT-Sheet is desirable more than unidirectional oriented composite. We have better design the structure so as not occur to stress centralization on the joining part.

• Composites Research
• /
• v.30 no.3
• /
• pp.193-201
• /
• 2017

Molecular dynamics simulation and the Mori-Tanaka micromechanics study are performed to investigate the effect of the covalent grafting between CNT and polyester on the mechanical behavior and load transfer of nanocomposites. The transversely isotropic stress-strain curves are determined through the tension and shear simulations according to the covalent grafting. Also, isotropic properties of randomly dispersed nanocomposites are obtained by orientation averaging the transversely isotropic stiffness matrix. By addressing the grafting, the transverse Young's modulus and shear moduli of the nanocomposites are improved, while the longitudinal Young's modulus decreases due to the degradation of the grafted CNT.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.553-553
• /
• 2000

The application as the parts of an automobile, using the property of GMT-Sheet, is increasing. In order to exchange the parts of an automobile for GMT-Sheet, at first, the establishment and joining problem of exact joining strength must be determined. We have studied it using composites which is not same each other fiber oriented condition so as to determine joining strength and joining condition of GMT-Sheet. h this study, the result of experiment of forming condition concerned joining problem of GMT-Sheet is this ; joining efficiency of of GMT-Sheet, increases as lap joint length L increases. Increase of compression ratio causes decrease of joining efficiency after of GMT-Sheet joining. In the viewpoint of recycling, randomly oriented composite of GMT-Sheet is desirable more than unidirectional oriented composite. We has better design the structure so as not to occur to stress centralizatien on the joining part.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.2
• /
• pp.111-119
• /
• 2001

The application as the parts of an automobile, using the property of GMT-Sheet, is increasing. In order to exchange the parts of an automobile for GMT-Sheet, at first, the establishment and problem of exact joining strength must be determined. We have studied it using composites which is not same each other fiber oriented condition so as to determine joining strength and joining condition of GMT-Sheet. In this study, the result of experiment of forming condition concerned joining problem of GMT-Sheet is this; joining efficiency of GMT-Sheet, increases as lap joint length L increases. Increase of compression ratio causes decrease of joining efficiency after of GMT-Sheet joining. In the viewpoint of recycling, randomly oriented composite of GMT-Sheet is desirable more than unidirectional oriented composite. We has better design the structure so as not to occur to stress centralization on the joining part.