• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.554-566
• /
• 2010

We present optical and microphysical particle properties of aerosol retrieved by multi-wavelength Raman lidar at Anmyun island ($36.32^{\circ}N$, $126.19^{\circ}E$), Korea. The results present aerosol properties in various height layers of the atmospheric pollution layers observed over the Korean peninsula on eight consecutive days (27, 28, 29, 30 and 31 May, 4, 5 and 7 June) in 2005 at Anmyun island. We found anthropogenic pollution on 27, 28, and 29 May and local haze on other measurement days. The origin of the particle plumes was determined by simulations of FLEXPART. The source regions of the particles resulted in rather clear differences between the optical and microphysical properties of the pollution layers. The single-scattering albedo of anthropogenic aerosols from China ($0.91{\pm}0.01$ at 532 nm) were lower than the single-scattering albedo of local haze aerosols ($0.95{\pm}0.01$ at 532 nm). Local haze aerosols show larger effective radii of $0.24{\pm}0.02\;{\mu}m$ at relative humidity of 55~75%. The effective radii of anthropogenic aerosols are $0.20{\pm}0.2\;{\mu}m$ and $0.27\;{\mu}m$ at relative humidity of 25~50%.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.1
• /
• pp.97-109
• /
• 2007

Vertical distribution and optical properties of atmospheric aerosols above the Korean peninsula are quite important to estimate effects of aerosol on atmospheric environment and regional radiative forcing. For the first time in Korea, vertical microphysical properties of atmospheric aerosol obtained by inversion algorithm were analyzed based on optical data of multi-wavelength Raman lidar system developed by the Advanced Environmental Monitoring Research Center (ADEMRC), Gwangju Institute Science and Technology (GIST). Data collected on 14 June 2004 at Gwangju ($35.10^{\circ}N,\;126.53^{\circ}E$) and 27 May 2005 at Anmyeon island ($36.32^{\circ}N,\;126.19^{\circ}E$) were used as raw optical data for inversion algorithm. Siberian forest fire smoke and local originated haze were observed above and within the height of PBL, respectively on 14 June 2004 according to NOAA/Hysplit backstrajectory analysis. The inversion of lidar optical data resulted in particle effective radii around $0.31{\sim}0.33{\mu}m$, single scattering albedo between $0.964{\sim}0.977$ at 532 nm in PBL and effective radii of $0.27{\mu}m$ and single scattering albedo between $0.923{\sim}0.924$ above PBL. In the case on 27 May 2005, biomass burning from east China was a main source of aerosol plume. The inversion results of the data on 27 May 2005 were found to be particle effective radii between $0.23{\sim}0.24{\mu}m$, single scattering albedo around $0.924{\sim}0.929$ at 532 nm. Additionally, the inversion values were well matched with those of Sun/sky radiometer in measurement period.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.4
• /
• pp.453-460
• /
• 2009

For constructing 3D information using aerial photograph or video sequences, left and right stereo images having different viewing angle should be prepared in overlapping area. In video sequences, left and right stereo images would be generated by mosaicing left and right slice images extracted in consecutive video sequences. Therefore, this paper is focused on generating left and right stereo mosaic images that are able to construct 3D information and video sequences could be made for the best use. In the stereo mosaic generation, motion parameters between video sequences should be firstly determined. In this paper, to determine motion parameters, free mosaic method using geometric relationship, such as relative orientation parameters, between consecutive frame images without GPS/INS geo-data have applied. After determining the motion parameters, the mosaic image have generated by 4 step processes: image registration, image slicing, determining on stitching line, and 3D image mosaicking. As the result of experiment, generated stereo mosaic image and analyzed result of x, y-parallax have showed.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.5
• /
• pp.429-439
• /
• 2001

EJB(Enterprise JavaBeans), the cornerstone for J2EE(Java$^{TM}$ 2 Platform, Enterprise Edition), is a server-side component standard model. Recently, development of supporting tool for this component model becomes important and there are many tools for developing EJB. In this paper, we purpose to design Enterprise Beans by component model, and perform design and implementation of code generator which generates skeleton code for Enterprise Beans automatically. We also implement EJB deployer for deploying these on application server. The code generator can make a JAR file automatically. This JAR file is deployed on application server by EJB specification as well. Using this tool, developer can create and deploy of Enterprise Beans more fast and exactly.y.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.167-170
• /
• 2015

In this paper, we propose the Micturition training and Automatic feeding system to enable busy modern people can grow pets more efficiently. This system will be able to operate a smart phone application with a Bluetooth, furthermore, by using the Wifi access the Internet from anywhere and to operate remotely. This system is divided micturition board feeding unit. micturition board consists of a water pressure sensor for detecting micturition and recorder module, speaker for voice output, feeding unit consists of two servo motor for auto feeding and Bluetooth sensor for remote control. Both micturition board and feeding unit produced Arduino board and C language-based Arduino sketch program, feeding unit was able to communicate with the library to support Bluetooth communication.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.139-143
• /
• 2018

Arduino, based on open source hardware, is used in many IoT devices, and IoT devices require multitasking for various inputs and outputs. Among the several methods used for multitasking based on Arduino, we compare three methods: Timing Call by using millis(), Simple Timer library method, and Timer library method. In order to measure the execution error caused by measurement and time delay of each method, two situations are created and analyzed. In the first case, 10 random tasks of a certain size are generated to measure the time delay of each method. In the second situation, 10 random tasks of a certain size are generated to compare execution errors caused by the time lag of the Timer library. In the first case, the millis() timing call method and the Simple Timer library method have a similar time delay and the Timer library method has more time delay. In the second situation, an execution error occurred in which small-size tasks were not called back at the correct timing due to the time delay.

• Journal of the Korea Convergence Society
• /
• v.10 no.4
• /
• pp.189-194
• /
• 2019

This thesis aimed to apply the 3D-printing technology rapidly introduced to the overall industry to jewelry design. In the results of examining preceding researches, out of 3D-printing methods, the FMD method was used the most in design area. However, for jewelry design, the 3D-printing is used for casting process out of production processes, so that the printing method is not FMD, but DLP. Thus, the researcher examined the material functions and applicability of jewelry design through research works, by applying the 3D-printing in DLP method to jewelry design. In the results, brooches were completed by applying the 3D-printing to the jewelry design with no casting process, and then utilizing enamel and pure silver together. Producing light and solid completed products in various colors, they were verified as applicable materials. Also, as the size and form of curved design mainly used for non-geometric jewelry design could be accurately predicted through Rhino CAD, diverse possibilities of advancement to be easily used for the development of formative form of jewelry design in the future were revealed.

• The Korea Journal of Herbology
• /
• v.32 no.4
• /
• pp.9-15
• /
• 2017

Objectives : In this study, the inhibitory activities of Korean Medicine against pancreatic lipase in vitro and biochemical analyses in vivo were measured to determine its possibility as a well-matched sauce material with chicken. Methods : The inhibitory activity on pancreatic lipase enzyme of 11 samples were evaluated in vitro and then 5 samples were selected. The activity of pancreatic lipase was investigated using orlistat as a positive control. Animals were divided into eight groups (n=7). The experimental groups except for normal group were fed 60% high-fat diet for 7 days. 5 samples were orally administered at a dose of 200 mg/kg body weight and orlistat were orally administrated at a dose of 60 mg/kg body weight for 7 days. Biochemical anaylses of 5 samples were executed based on lipid parameters analysis. Results : Korean Medicines with an $IC_{50}$ of below 1 mg/kg were Scutellariae Radix, Gardeniae Fructus, Theae Folium Coptidis Radix, and Mori Cortex Radicis. Body weight change of Mori Cortex Radicis reduced significantly, however fecal triglyceride couldn't regulate effectively. The most excellent inhibitory effect of pancreatic lipase showed in Scutellariae Radix treatment and also regulated significantly serum triglyceride and total cholesterol. Moreover, the supplementation of Coptidis Radix excreted meaningfully triglyceride to fece. Conclusions : In conclusion, Coptidis Radix may exert anti-obesity effect by directly inhibiting pancreatic lipase, which would prevent the absorption of lipid from the small intestine. Besides, Mori Cortex Radicis may led to the decrease of the body weight via the different pathway.

• Smart Media Journal
• /
• v.12 no.6
• /
• pp.27-34
• /
• 2023

As Netflix usage has increased due to the COVID-19 pandemic, users' experiences with the service have also increased. Therefore, this study aims to conduct topic modeling analysis based on Netflix review data to explore the changes in Netflix user experience and service before and after the COVID-19 pandemic. We collected Netflix app review data from the Google Play Store using the Google Play Scraper library, and used topic modeling to examine keyword differences between app reviews before and after the pandemic. The analysis revealed four main topics: Netflix app features, Netflix content, Netflix service usage, and Netflix overall reviews. After the pandemic, when user experience increased, users tended to use more diverse and detailed keywords in their reviews. By using Netflix review data to analyze users' opinions, this study shows the changes in user experience of Netflix services before and after the pandemic, which can be used as a guide to strengthen competitiveness in the competitive OTT market.

• Pediatric Infection and Vaccine
• /
• v.26 no.2
• /
• pp.99-111
• /
• 2019

Purpose: Respiratory syncytial virus (RSV) and human rhinovirus (hRV) are the most common causes of child respiratory viral infections. We aimed to investigate epidemiological and clinical characteristics of RSV and hRV single infections and coinfections. Methods: Nasopharyngeal aspirates of hospitalized children aged <5 years were tested using multiplex reverse transcription polymerase chain reaction (RT-PCR) from October 2014 to April 2017. Their medical records were retrospectively reviewed. Results: RSV or hRV was detected in 384 patients who divided into 3 groups: patients with RSV (R group, n=258); patients with hRV (H group, n=99); and patients with both (RH group, n=27). The R group (median age, 6 months) consisted of 248 (96.1%) patients with lower respiratory tract infection (LRTI), and 14 (5.4%) needed oxygen inhalation. Infants aged <12 months (63.2%) had respiratory difficulty and were supplied oxygen more often. The H group (median age, 16 months) consisted of 56 (56.6%) patients with LRTI, 4 (4%) required oxygen inhalation, and 1 (1.0%) required mechanical ventilation. Infants (40.4%) showed longer hospitalization compared to patients aged ${\geq}12$ months (5 vs. 4 days, P<0.05). The RH group consisted of 24 (88.9%) patients with LRTI, and 2 (7.4%) needed oxygen inhalation. Hospitalization days and oxygen inhalation and mechanical ventilation rates did not differ between single infections (R and H groups) and coinfections (RH group). Conclusions: RSV was detected more often in younger patients and showed higher LRTI rates compared to hRV. Single infections and coinfections of RSV and hRV showed no difference in severity.