• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.879-884
• /
• 2024

Wireless sensor network technology is becoming increasingly important with the advancement of the Fourth Industrial Revolution. Consequently, various protocols such as LEACH, PEGASIS, and EEACP have been developed in an attempt to increase energy efficiency. However, the EEACP protocol still has room for improvement in terms of energy consumption during transmission. Particularly, inefficient paths associated with data reception settings may compromise the network's survivability. The proposed A-EEACP protocol optimizes data transmission direction around the sink node to reduce energy consumption and enhance the network's survivability.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2024.05a
• /
• pp.323-326
• /
• 2024

본 연구에서는 커널 퍼저인 Syzkaller 를 사용하여 리눅스 커널의 네트워크 서브시스템을 퍼징하고 그 결과를 분석하여, 높은 커버리지를 달성하기가 왜 어려운지 분석하고 이를 개선하기 위한 방법들을 제안한다. 첫 번째 실험에서는 TCP 및 IPv4 소켓과 관련된 시스템 콜 및 매개변수만 허용하여 리눅스 커널 네트워크 퍼징을 진행하고, 두 번째 실험에서는 Syzkaller 가 지원하는 모든 시스템 콜을 포함하도록 범위를 확장한다. 첫 번째 실험 결과, 퍼징 시작 약 55 시간만에 TCP 연결 수립에 성공하였다. 두 번째 실험 결과, 첫 번째 실험보다 전반적인 커버리지와 라우팅 서브시스템의 커버리지는 개선되었으나 TCP 연결 수립에는 실패하였다. TCP 연결 수립을 위해서는 서버의 IP 주소 및 포트번호를 클라이언트가 무작위 입력 생성을 통해 맞혀야 하는데, 이 과정에서 시간이 오래 걸리기 때문에 연결 수립이 쉽게 이루어지지 않는 것으로 분석된다. 추가적으로, 본 연구에서는 TCP 연결 수립을 쉽게 하기 위한 하이브리드 퍼징, IP 패킷 포워딩 허용, 패킷 description 없이 퍼징 등 Syzkaller 를 이용하여 리눅스 커널 네트워크 서브시스템을 더 효율적으로 퍼징할 수 있는 방법들을 제안한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.437-441
• /
• 2006

Wireless sensor network consists of sensor nodes which are disseminated closely to each other to collect informations for the various requests of a sensor application applied for sensing phenomenons in real world. Each sensor node delivers sensing informations to an end user by conducting cooperative works such as processing and communicating between sensor nodes. In general, the power supply of a sensor node is depends on a battery so that the power consumption of a sensor node decides the entire life time of a sensor network. To resolve the problem, optimal routing algorithm can be used for prolong the entire life time of a sensor network based on the information on the energy level of each sensor node. In this paper, different from the existing Directed Diffusion and SPTN method, we presents a data dissemination protocol based on lower-power consumption that effectively maximizes the whole life time of a sensor network using the informations on the energy level of a sensor node and shortest-path hops. With the proposed method, a data transfer path is established using the informations on the energy levels and hops, and the collected sensing information from neighboring nodes in the event-occurring area is merged with others and delivered to users through the shortest path.

• Journal of KIISE:Databases
• /
• v.33 no.6
• /
• pp.620-630
• /
• 2006

Event-detection is an important application of sensor networks. Join operations can facilitate event-detection with a condition table predefined by a user. When join operations are used for event-detection, it is desirable, if possible, to do in-network join processing to reduce communication costs. In this paper, we propose an energy-efficient in-network join algorithm, called PBA. In PBA, each partition of a condition table is stored along the path from each node to the base station, and then in-network joins are performed on the path. Since each node can identify the parts to store in its storage by its level, PBA reduces the cost of disseminating a condition table considerably Moreover, while the existing method does not work well when the ratio of the size of the condition table to the density of the network is a little bit large, our proposed method PBA does not have such a restriction and works efficiently in most cases. The results of experiments show that PBA is efficient usually and especially provides significant cost reduction over existing one when a condition table is relatively large in comparison with the density of the network, or the routing tree of the network is high.

• The KIPS Transactions:PartC
• /
• v.13C no.2 s.105
• /
• pp.219-226
• /
• 2006

The shortest path is only maintained during short time because network topology changes very frequently and each mobile nodes communicate each other by depending on battery in MANET(Mobile Ad-hoc Network). So many researches that are to overcome a limitation or consider a power have executed actively by many researcher. But these protocols are considered only one side of link stability or power consumption so we can make high of stability but power consumption isn't efficient. And also we can reduce power consumption of network but the protocol can't make power consumption of balancing. For that reason we suggest RBSSPR(Residual Battery Capacity and Signal Strength Based Power-aware Routing Protocol in MANET). The RBSSPR considers residual capacity of battery and signal strength so it keeps not only a load balancing but also minimizing of power consumption. The RBSSPR is based on AODV(Ad-hoc On-demand Distance Vector Routing). We use ns-2 for simulation. This simulation result shows that RBSSPR can extense lifetime of network through distribution of traffic that is centralized into special node and reducing of power consumption.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.5 no.3
• /
• pp.27-45
• /
• 2010

It is strongly believed that multicast will become one of the most promising services on internet for the next generation. Multicast service can be deployed either on network-layer or application-layer. IP multicast (network-layer multicast) is implemented by network nodes (i.e., routers) and avoids multiple copies of the same datagram on the same link. Despite the conceptual simplicity of IP multicast and its obvious benefits, it has not been widely deployed since there remain many unresolved issues. As an alternative to IP multicast, overlay multicast (application-layer multicast) implements the multicast functionality at end hosts rather than routers. This may require more overall bandwidth than IP multicast because duplicate packets travel the same physical links multiple times, but it provides an inexpensive, deployable method of providing point-to-multipoint group communication. In this paper we develop an efficient method applied greedy algorithm for solving two models of overlay multicast routing protocol that is aimed to construct MDST (Minimum Diameter Spanning Tree : minimum cost path from a source node to all its receivers) and MST (Minimum Spanning Tree : minimum total cost spanning all the members). We also simulate and analyze MDST and MST.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.27-30
• /
• 2012

In the Cluster-Based Routing Protocol (CBRP) a cluster header in each cluster should be elected. The cluster headers consume energy much more than other nodes because they manage and operate all of mobile nodes in their cluster. The traditional CBRP elects a cluster header without considering the remaining electric energy of each node. So, there exists problems that the cluster header has short average lifetime, and another cluster header should be elected again frequently. In this paper, we propose the improved protocol which prolongs the lifetime of the cluster header, decreases of header re-elected problem, decreases of header re-elected problem and enhances the stability of the path. In order to achieve this, when a cluster header is elected in a cluster, the remaining electric energies of all the nodes are compared with one another, and the node with the highest energy is elected as the cluster header. Also, the node with the second highest energy is elected as the second header. If the elected cluster header is unable to perform the role of the cluster header because the remaining energy level goes low, it sends a beacon message to neighbor member nodes and the second header will serve as the cluster header.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.75-84
• /
• 2010

As broadcasting in Mobile Ad hoc NETwork (MANET) is the process that a node sends a packet to all other nodes in the network. it is used for routing protocols such as Ad hoc On demand Distance Vector (AODV) to disseminate control information for establishing the routes. In this paper, we propose Probabilistic Broadcasting mechanism based on Distance Ratio between sender and receive node in MANETs. The proposed approach is based on the combination of probability and distance based approach. A mobile node receiving broadcast packets determines the probability of rebroadcasting considering distance ratio from sender. The distance ratio of a node is calculated by the distance from sender and the length of radio field strength. As a node with high distance ratio is located far away from sender, rebroadcast probability is set to high value. On contrary, the low rebroadcast probability is set for a node with low distance ratio which is close to sender. So it reduces packets transmission caused by the early die-out of rebroadcast packets. Compared with the simple flooding and fixed probabilistic flooding by simulation, our approach shows better performances results. Proposed algorithm can reduce the rebroadcast packet delivery more than 30% without scanting reachability, where as it shows up to 96% reachability compared with flooding.

• Journal of Convergence for Information Technology
• /
• v.10 no.12
• /
• pp.15-21
• /
• 2020

Although IoT systems are used in a variety of heterogeneous environments as cloud environments develop, all IoT devices are not provided with reliable protocols and services. This paper proposes an IoT data management technique that can extend the IoT cloud environment to an n-layer multi-level structure so that information collected from different heterogeneous IoT devices can be efficiently sorted and processed. The proposed technique aims to classify and process IoT information by transmitting routing information and weight information through wireless data link data collected from heterogeneous IoT devices. The proposed technique not only delivers information classified from IoT devices to the corresponding routing path but also improves the efficiency of IoT data processing by assigning priority according to weight information. The IoT devices used in the proposed technique use each other's reliable protocols, and queries for other IoT devices locally through a local cloud composed of hierarchical structures have features that ensure scalability because they maintain a certain cost.y channels of IoT information in order to make the most of the multiple antenna technology.

• Journal of Korea Multimedia Society
• /
• v.11 no.10
• /
• pp.1446-1459
• /
• 2008

In an infrastructure-based wireless network, an access point is used for all communications among mobile devices. However, when a mobile device moves into a dead Bone, a connectivity disruption between the mobile device and the access point occurs. Such connectivity disruption consequently leads to another connectivity disruption between the mobile device moving toward the dead zone and other wireless-enabled devices located within the area of the infrastructure-based wireless network. To cope with the connectivity disruption in the infrastructure-based wireless network the ad hoc network that dynamically forms a network without any preexisting communication infrastructure needs to be set up to provide seamless connections among mobile devices. In this paper, we propose the DNSQ-MAC (Dynamic Network State aware QoS-Medium Access Control) technique that meets the deadlines of MAC frames forwarded over hop-by-hop multipaths and guarantees the QoS performance of an ad hoc-based wireless network. Mobile devices incorporating the DNSQ-MAC technique are capable of adjusting to the new dynamic network status in order to enhance the QoS performance in the ad hoc-based wireless network. A case study which exploits the Qualnet simulator shows that the proposed DNSQ-MAC technique can guarantee the deadlines of MAC frames forwarded over hop-by-hop multipaths and enhance the QoS performance of various routing protocols and packet schedulers running on the network layer above the MAC layer.