• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.19-26
• /
• 2004

A prior fundamental study was executed using a constant volume chamber to improve the burning properties of lean pre-mixture by the injection of active radicals generated in the sub-chamber. In consequence, RI method shows remarkable progress in the aspects of burning velocity and combustible lean limit compared with SI method. In this study, the necessary additional works have been performed to be based on the former results. We changed parameters as the initial temperature and the initial pressure of mixture. And the effects of residual gas at issue in a real engine were investigated. As a result, the effects of initial temperature were significant, but on the other hand, those of initial pressure were slight. The correlation of passage hole number between overall passage hole area was grasped. And the more detailed analysis is required on residual gas.

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.300-305
• /
• 1998

Kinetics of termonomer emulsion polymerization during interval II (i.e, after completion of latex particle formation) were studied through pseudo-homopolymerization (PHP) method. Extended Smith-Ewart equation and equation of instantaneous polymer composition are respectively reduced to the corresponding equation for homopolymerization by defining average rate constants. Average number of radicals per particle and instantaneous polymer compositions were respectively predicted by varying termonomer composition within latex particles for systems containing no more than one growing radical per particle. Styrene-Methyl methacrylate-Acrylonitrile (SMA) system was used for model calculation.

• Journal of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.136-142
• /
• 1990

PMO (Pertubation Molecular Orbital) energies, ${\delta}E$, have been calculated from NBMO (Nonbonding Molecular Orbital) coefficient for some hydrocarbons by PMO method. It was found that the stabilization energies are correlated with activation energies, bond dissociation energies, and G-values observed from vapor phase radiolysis in the free radical reactions.

• Electrical & Electronic Materials
• /
• v.3 no.2
• /
• pp.115-122
• /
• 1990

플라즈마중합 에틸메타아크릴레이트(PPMMA) 박막의 유전특성인 유전정접(tan .delta.)과 정전용량(C)을 관측하고 산화와 열처리 및 플라즈마처리로 인한 PPMMA의 tan .delta.와 C의 변화에 대하여 연구하였다. 측정온도 25.deg.C, 측정주파수 1KHz에서 1MHz의 범위에서 PPMMA 박막은 CO와 -OH같은 산화물의 생성으로 인하여 tan .delta. 와 C는 증가하고 tan .delta.는 측정주파수 내에서 피이크를 형성한다. 이는 PPMMA내에 잔류하는 저분자량 성분과 자유라디칼의 존재와 공기중에서의 산화가 그 원인이라 할 수 있다. 본연구에서는 PPMMA박마그이 열처리 및 플라즈마처리를 하여 저분자량 성분과 라디칼을 제거하고 산화를 방지하여 박막의 유전특성을 개선하였다.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.715-719
• /
• 2000

It is reported that we are facing the serious environment pollution difficulties such as acid rain, green house effects, etc. The gaseous matter CO, NOx, SOx, VOCs which are regarded as main factors for these current pollutions are mainly emitted from power plants and vehicles. Therefore several leading countries are regulating the related laws strictly, especially exhaust emissions from a Diesel engine without an after treatment device. The Objective of this study is to find out NOx removal characteristics focused on emissions of a Diesel engine using radical at each engine speed and load. It is generated from outer air and put into a mixing chamber in the end of exhaust line. In addition, the optimum temperature condition to activate reaction by radical is experimentally carried out. Concentration of exhaust emissions is analyzed from the gas anlayzer(KaneMay) and FTIR to estimate by-products.

• Journal of Food Hygiene and Safety
• /
• v.13 no.4
• /
• pp.394-399
• /
• 1998

결명자의 주용성분인 노르-루브로푸사린의 함량이 높은 추출물을 얻기 위하여 결명자분말을 0~100%의 에탄올수용액으로 추출하여 고농도의 노르-루브로푸사린을 함유하는 결명자 추출물을 제조하였다. 결명자추출물과 주요 함유성분인 노르-루브로푸사린은 항산화활성과 프리라디칼소거 작용을 나타내었으며, H2O2 유도 세포독성에 대해서도 억제적으로 작용하여 cyto-protective effect를 나타내었다. 또한 DNA crosslinking agent 인 mitomycin C 유도 소핵생성에도 결명자 70% 에탄올추출물과 노르-루브로파사린이 매우 높은 억제활성을 나타내었다. 따라서 결명자 추출물과 노르-루브로푸사린은 산소라디칼들에 의한 산화적 손상 및 DNA 손상 등에 억제적으로 작용하는 기전을 활용하여 항산화성 스트레스를 통한 항노화 , 암예방제로서의 응용가능성이 높은 물질로 판단되었다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.37-39
• /
• 2000

오존에 대한 예보 모델을 연구하는 데는 오존의 생성과 소멸에 관한 광 화학 반응에 대한 이해가 중요한 데 대류권에서 일어나는 알짜 오존 생성(net ozone production)반응은 다음과 같다. (R1) $HO_2$.+NO$\longrightarrow$$NO_2$+OH. (R2) $RO_2$.+NO$\longrightarrow$$NO_2$+RO. (R3) $NO_2$+hu(424< nm) $\longrightarrow$NO+O($^{3}P$) (R4) O($^{3}P$)+$O_2$+M$\longrightarrow$$O_3$+M이때 (R1)과 (R2) 반응에 참여하는 $HO_2$.라디칼 / $RO_2$.라디칼은 주로 대기 중에 존재하는 탄화수소(RH)와 OH.의 반응에 의하여 직접 생성되기도 하고, 이때 생성된 알데하이드(RCHO) 화합물이 OH.과의 반응과 광분해 반응을 통해서 형성된다. 한편, 대도시 지역의 경우 자동차의 배기가스가 알데하이드 화합물의 주요 인위적인 배출원으로 알려져 있다(Viskari et al., 2000, Granby et al., 1997). (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.33-33
• /
• 2010

플라즈마를 이용한 건식식각공정은 현 반도체, 디스플레이, 태양광 산업에 널리 적용되는 공정으로며 일부공정은 플라즈마 없이는 식각공정이 불가능할 정도로 매우 중요한 공정이다. 건식식각공정은 크게 플라즈마의 이온에 의한 물리적인 프로세스와 라디칼에 의한 화학적인 프로세스로 나눌 수 있으며, 최근 들어, 화학적인 식각프로세스가 매우 중요함이 알려지게 되었다. 본 발표에서는 화학적 식각프로세스에서 가장 중요한 역할을 하는 플라즈마 라디칼을 챔버가 공정에 제한받지 않고 널리 쓰일 수 있는 데이터 베이스로 생산하는 아이디어 전략을 소개하는 시간을 통해 건식식각물성데이터 센터의 소개와 참조표준 데이터베이스의 중요성을 알리고자 한다.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.224-228
• /
• 1991

The effect of linoleate hydroperoxides(LAHPO) on pepsin activity was investigated. The activity of pepsin was largely decreased by LAHPO at various temperatures and pH. The inactivation of pepsin seems to be the radicals in the system because ascorbate and metal ions enhanced the inactivation of enzyme by LAHPO. It was shown by SDS-PAGE that LAHPO caused scission of the enzyme in the model system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.4
• /
• pp.506-513
• /
• 2008

The engine containing a radical injector has been studied to improve the performances of efficiency and to reduce the exhaust emissions recently. The engine is far different from general compression ignition engines or spark ignition engines for the concept of combustion process. The inflow characteristic from main chamber into radical chamber during compression stroke is important because the radical chamber must have enough fresh air to generate appropriate radicals. The numerical simulation is performed in each specific shape and the engine speed by using KIVA code. The result shows that the fresh air inflow from main chamber into the radical chamber is the best at 45 degree of the hole angle.