• Journal of the Korean Chemical Society
• /
• v.28 no.2
• /
• pp.135-142
• /
• 1984

New type dioxygen bridged complexes of palladium were prepared by using $KO_2$ as a source of superoxide ion $(O_2^-)$. The method is completely different from the traditional one which has adopted the oxidative addition of molecular oxygen to transition metal complexes in low valency. It was suggested that the reaction to prepare the dioxygen complexes proceeded via nucleophilic displacement followed by electron transfer reaction. Five new type dioxygen complexes having ${\pi}$-allyl ligand were prepared and characterized by the application of the reaction of $O_2^-$.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.64-71
• /
• 1992

New type dioxygen bridged complexes of palladium were prepared by using $KO_2$ as a source of superoxide ion($O_2{^-}$). The method is completely different from the traditional one which has adopted the oxidative addition of molecular oxygen to prepare the dioxygen complexes. This reaction proceeds via nucleophilic displacement followed by electron transfer reaction. Three new type dioxygen complexes of palladium having amine ligands were prepared and characterized by the application of the reaction of $O_2{^-}$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.235-236
• /
• 2009

금속 아세테이프가 금속으로 열분해하는 반응을 이용하여 템플레이트 안에 잘 정렬된 금속 나노 구조물을 얻는 것은 센서 (sensor), 분리 막(separation), 저장 장치(storage), 에너지 전환 장치 (energy conversion)에 응용이 가능하다. 실버 아세테이트와 팔라듐 아세테이트에서 순수 실버와 팔라듐 나노 구조의 제조 및 형태의 차이를 밝히는 것을 목적으로 나노 입자의 크기와 활성화 에너지가 이에 영향을 주는 것으로 확인할 수 있었다. 금속 나노 구조의 확인 및 나노입자의 크기와 활성화 에너지를 분석 관찰하기 위해 DSC, TG, XRD, FE-SEM 등을 이용하였다.

• Resources Recycling
• /
• v.30 no.3
• /
• pp.47-54
• /
• 2021

Palladium present in colloidal-type plated spent catalyst solution that is used in electroless plating process has not been recovered but discharged as wastewater so far. Recyclig of paladium in colloidal-type plated spent catalyst solution is achieved with this study. This study presents the estimation of resource consumption and GHG emissions during the recycling and disposal of palladium in the plated spent catalyst solution using life cycle assessment. The reduction of resources and GHG are also estimated. Based on the palladium amount of 1 kg during disposal, the GHG emission amount was estimated to be 9.67E+03 kgCO₂eq., and the amount of resource consumption was 3.94E+01 kgSb-eq. However, GHG emission was 1.96E+03 kgCO₂eq., and the amount of resource consumption was 1.54E+01 kgSb-eq. during recycling. Considering the major substances affecting GHG emissions and amount of resource consumption, CO₂ was found to significantly affect GHG emissions, accounting for 91.42% in disposal and 98.37% in recycling. The major substance affecting the amount of resource consumption was hard coal, which accounted for 40.63% in disposal and 60.73% in recycling. Upon recycling 1 kg palladium, 8,967.17 kgCO₂eq. of greenhouse gas emission was reduced, while the resource consumption was reduced to 10.10 kg Sb-eq. In addition, the direct palladium resource reduction rate due to palladium recycling was 50%.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.458-464
• /
• 2006

The Pd-Ni-Ag alloy composite membrane using modified porous stainless steel (PSS) as a substrate was prepared by a electroless plating technique. In this work, we have introduced the intermediate layer between Pd-based alloy and a metal substrate. As an intermediate layer, the mixtures of nickel powder and inorganic sol such as $SiO_{2}$ sol, $Al_{2}O_{3}$ sol, and $TiO_{2}$ sol were used. The intermediate layers were coated onto a PSS substrate according to various membrane preparation conditions and then $N_{2}$ fluxes through the membranes with different intermediate layers were measured. The surface morphology of the intermediate layer in the mixture of nickel powder and inorganic sol was analyzed using scanning electron microscope (SEM). Finally, the Pd-Ni-Ag alloy composite membrane using the support coated with the mixture of nickel powder and silica as an intermediate layer was fabricated and then the gas permeances for $H_{2}$ and $N_{2}$ through the Pd-based membrane were investigated. The selectivity of $H_2/N_2$ was infinite and the $H_{2}$ flux was $1.39{\times}10^{-2}mol/m^2{\cdot}s$ at the temperature of $500^{\circ}C$ and trans-membrane pressure difference of 1 bar.

• Journal of the Korean Chemical Society
• /
• v.56 no.1
• /
• pp.175-179
• /
• 2012

• Journal of the Korean Vacuum Society
• /
• v.4 no.S1
• /
• pp.87-91
• /
• 1995

초고집적회로의 배선 금속으로 사용되는 알루미늄 합금은 치밀한 표면 산화막 때문에 화학증착법에 의하여 비어를 선택적으로 충전하기 힘들다. 본 연구에서는 기저층을 이용하여 비어에 선택적으로 화학증착함으로써 평탄화를 이루는 새로운 방법을 제안하였다. 알루미늄, 구리 등의 배선 금속, 팔라듐, 코발트 등의 금속, 기타 타이타늄 질화물 등의 기판에 대하여 화학증착 알루미늄의 특성과 실리콘 산화물간의 선택성을 평가하였으며 팔라듐, 코발트, 타이타늄 질화물 등을 기저층으로 사용한 경우에 낮은 비저항과 안정적인 선택적 비어 충전을 이룰 수 있었다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.231-232
• /
• 2000

자동차 보급의 증가에 의한 심각한 대기오염으로 인하여 국내 제작차(휘발유 자동차)의 경우 1987년부터 자동차 배기가스 정화용 촉매 전환기의 장착을 의무화하였다(환경부, 1998). 자동차용 촉매로 많이 사용되는 귀금속은 백금(Pt), 팔라듐(Pd), 로듐(Rh)이며, 수요비율은 백금이 전체 수요의 39%, 팔라듐이 16%, 로듐이 96%로 자동차용으로 많은 귀금속이 사용되고 있음을 알 수 있다. (중략)

• Journal of the Korean Chemical Society
• /
• v.52 no.6
• /
• pp.724-726
• /
• 2008

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.190-190
• /
• 2015

본 연구는 에틸렌디아민을 착체욕에서 팔라듐-니켈 합금도금을 형성하였다. 그리고 전류밀도 $1.0{\sim}20A/dm^2$ 변화를 통해 도금층 내의 니켈함량을 10.4 ~ 27.7 wt% 변화시켰다. 이를 통해 팔라듐-니켈 합금도금의 경도, 접촉저항, 표면 및 단면 조직에 미치는 도금층 내의 니켈함량의 영향에 대하여 조사하였다.