• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.2
• /
• pp.145-152
• /
• 2009

Currently almost all in-service-inspection techniques, applied in domestic nuclear power plants, are partial to field inspection technique. These kinds of techniques are related to managing nuclear power plants by the operation of foreign-produced inspection devices. There have been so many needsfor development of native in-service-inspection device because there is no native diagnosis device for nuclear power plant inspection yet in Korea. In this research, we developed several core techniques to make an automated ultrasonic pipe inspection system for nuclear power plants. A high performance multi-channel ultrasonic pulser/receiver module, an A/D converter module and a digital main CPU module were developed and the performance of the developed modules was verified. The S/N ratio, noise level and signal acquisition performance of the developed modules showed proper level as we designed in the beginning.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.3
• /
• pp.257-263
• /
• 2005

Short-circuit rotor windings on a generator causes unstable oscillation of unbalance of flux, asymmetrical heat. In order to prevent serious accidents of short-circuit rotor windings, it is important to study the shorted-turn diagnosis method for rotor windings of the generator. To improve the defects of the diagnosis with sensors, the new sensorless method for rotor shorted-turn diagnosis is proposed, which is to measure the electrical values of the voltage and current at the generator and then to detect if the shorted-turned phenomena would occurred. For the feasibility of the suggested method the theoretical results are shown in the aspects of the air-gap flux density, the flux leakage, the generated output voltage and the shorted field current through the digital simulation. Also the possibility of decision for the suggested sensorless method could be shown in this paper.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.227-234
• /
• 2020

This paper introduces the state definition and diagnostic algorithm for autonomic control of manufacturing facilities. Smart factory systems through cyber-physical systems and digital twin technology are increasing the productivity and stability of existing manufacturing plants, which has become an issue recently. A Smart factory system is one of the key technologies that make up a smart factory system, to improve productivity, enable workers to make better decisions, and to control abnormal process flows. However, performing an autonomic control process based on large number of integrated plat data requires significant advance work. Therefore, in this paper, we define an abstracted facility state for manufacturing facility autonomic control and propose an algorithm to diagnose the current state. This makes the autonomic control process simpler by autonomic control based on the facility status rather then integrated facility data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8B
• /
• pp.971-978
• /
• 2011

There is a method to judge state of organs by looking color and shape of face in diagnosis of Oriental Medicine, So, to diagnosis of health condition has been applied development medical services act of using it as check for defects of organs in face. In this paper, we performed analysis white pupils and left cheek in face area change of color according to accrue of alcohol associated with liver function status based on diagnosis method Oriental Medicine. From that, we applied Lab digital color system to extraction of left cheek and white pupils area in facial image. To analysis patterns in color change of left cheek. white pupils area according to alcohol accumulative steps carried out study based on analysis of medical interrelationship of liver function,

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.5
• /
• pp.80-86
• /
• 2005

Induction motors are a critical component of many industrial processes and are frequently integrated in commercially available equipment. Safety, reliability, efficiency, and performance are some of the major concerns of induction motor applications. Fault tolerant control (FTC) strives to make the system stable and retain acceptable performance under the system faults. All present FTC method can be classified into two groups. The first group is based on fault detection and diagnostics (FDD). The second group is includes of FDD and includes methods such as integrity control, reliable stabilization and simultaneous stabilization. This paper presents the fundamental FDD-based FTC methods, which are capable of on-line detection and diagnose of the induction motors. Therefore, our group has developed the embedded distributed fault tolerant and fault diagnosis system for industrial motor. This paper presents its architecture. These mechanisms are based on two 32-bit DSPs and each TMS320F2407 DSP module processes the stator current, voltage, temperatures, vibration signal of the motor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.2
• /
• pp.212-218
• /
• 2020

There are dozens of different types of lesions that can be diagnosed through chest X-ray images, including Atelectasis, Cardiomegaly, Mass, Pneumothorax, and Effusion. Computed tomography(CT) test is generally necessary to determine the exact diagnosis and location and size of thoracic lesions, however computed tomography has disadvantages such as expensive cost and a lot of radiation exposure. Therefore, in this paper, we propose a deep learning algorithm for judging the presence or absence of lesions in chest X-ray images as the primary screening tool for the diagnosis of thoracic lesions. The proposed algorithm was designed by comparing various configuration methods to optimize the judgment of presence of lesions from chest X-ray. As a result, the evaluation rate of lesion presence of the proposed algorithm is about 1% better than the existing algorithm.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.3
• /
• pp.83-90
• /
• 2022

Diabetes is a common disease today, and there are also many cases of developing into serious complications called Diabetic Foot Ulcers(DFU). Diagnosis and prevention of DFU in advance is an important task, and this paper proposes the method. Based on existing studies introduced in the paper, it can be seen that foot pressure and temperature information are deeply correlated with DFU. Introduce the process and architecture of SmarTinsole, an IoT device that measures these indicators. Also, the paper describes the preprocessing process for AI-based diagnosis of DFU. Through the comparison of the measured pressure graph and the actual human step distribution, it presents the results that multiple information collected in real-time from SmarTinsole are more efficient and reliable than the previous study.

• Journal of Internet of Things and Convergence
• /
• v.9 no.1
• /
• pp.41-47
• /
• 2023

Today, due to the increase in global population growth, the international community is discussing solving the food problem. The aquaculture industry is emerging as an alternative to solving the food problem. For the innovative growth of the aquaculture industry, smart fish farms that combine the fourth industrial technology are recently being distributed, and full-cycle digitalization is being promoted. Water quality sensors, which are important in the aquaculture industry, are electrochemical portable sensors that check water quality individually and intermittently, making it impossible to analyze and manage water quality in real time. Recently, optically-based monitoring sensors have been developed and applied, but the reliability of monitoring data cannot be guaranteed because the state information of the water quality sensor is unknown. Therefore, this paper proposes an algorithm representing self-diagnosis status such as Failure, Out of Specification, Maintenance Required, and Check Function based on monitoring data collected by water quality sensors to ensure data reliability.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.34 no.4
• /
• pp.801-809
• /
• 2024

In the digital age, the importance of personal information has magnified, underscoring the need for enhanced personal information protection, especially within public institutions. Despite ongoing efforts since 2007, significant breaches in public sector information underline persistent vulnerabilities. This study advocates for a transition from a diagnostic to an assessment framework to fortify privacy management in public institutions, as mandated by recent legislative revisions. The amended Personal Information Protection Act introduces an assessment approach, aiming to comprehensively assess and mitigate risks by expanding the scope of evaluation and implementing robust regulatory measures. This study examines the limitations of the current diagnostic practices through literature review and case analysis and proposes a systematic approach to adopting the new assesment system. By enhancing the assessment framework, the study expects to improve the effectiveness of personal information management in public institutions, thereby restoring public trust and ensuring a stable progression into a more secure digital era. The transition to an assessment system is designed not only to address the gaps in the current framework but also to provide a methodical assessment that supports ongoing improvement and compliance with enhanced legal standards.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.390-398
• /
• 2017

In this study, we conducted a questionnaire survey for the purpose of finding a method of mobile sector ecosystem activation targeted at small and medium businesses (SMBs). Through the total of 204 responders consisting of business employees from each mobile sector, we analyzed the factors inhibiting the development of the mobile ecosystem and preventing the activation the mobile market, as well as conducting a diagnosis of the digital potential. This paper presented suggestions for searching for a systematic supporting strategy considering the short-term inhibitory factors (market structure improvement, financial support, etc.) and long-term orientation factors (personnel nurturing, strengthening of supporting role by governmental initiative) for the activation of the domestic mobile market. After measuring the digital potential, we found that domestic mobile SMBs have perceived the importance of the digital potential and have considered and readied themselves for the future market. The present survey found that if suitable digitalization can be accomplished for their firms' products and services, they have the ability and willingness to succeed in the market. However, they have a hard task ahead of them from adigital delivery perspective given the potential for digital disruptions.