• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.177-186
• /
• 2009

Nowadays, as going to information society based knowledge, the informations are acquired, processed, serviced based digital environment. In surveying field, the trend have been changed from the analog foundation to the digital foundation. Also, aerial photogrammetry is being changed from analog aerial photogrammetry to digital aerial photogrammetry. In this paper, the analysis of accuracy is performed for the comparison of traditional aerial photogrammetry with digital aerial photogrammetry usign UltracamX in AT and Block Adjustment. As the results, Bundle adjustment in digital aerial photogrammetry with GPS/INS have more advantages than traditional independent adjustment in analog aerial photogrammetry. Digital aerial photogrammetry contributes the higher accuracy in AT and block adjustment more than analog aerial photogrammetry.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.2
• /
• pp.173-180
• /
• 2012

The most recent, 80 mega pixels digital camera appeared through the development of digital technology, and nonmetric digital cameras have been using in various field of photogrammetry. In this study, we experimented lens calibration using aerial photographs and ground control points. The aerial photographs were taken a non-metric digital camera which is CMOS(Complementary Metal Oxide Semiconductor) 21.1 mega pixels sensor and 35mm lens at a helicopter. And the ground control points were selected on the 1:1,000 plotting origin data. As a result, we calculated focal length, PPA(Principal Point of Autocollimation) and symmetric radial distortion coefficients from the lens. Also, RMSE(root mean square error) and maximum residual of the ground control points from the aerial triangulation were compared before and after calibration. And we found that the accuracy of the after calibration was improved very significantly.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.4_1
• /
• pp.293-298
• /
• 2014

Recently, the direct georeferencing has been becoming a common method in the aerial photogrammetry. As this direct georeferencing method using converged sensor of the digital photogrammetry camera and GPS(Global Positioning System)/INS(Inertial navaigation System), more rapid and accurate aerial photogrammetry has improved following advanced performance in photogrammetry. Since the accuracy of EO parameters from the direct georeferencing is determined by GPS/INS accuracy, it is significant to calculate the exact attitude information using values of INS rotations. For following calculations, the misalignment, such as INS rotation and the gap of GPS/INS, has to be decided. Because the number of ground control points are used for tirangulation and boresight calibration, those results should be different according to array and location of ground control points. In the study, those location and array of ground control points were tested to be used boresight calibration. As a result, there is no significant change of misalignment and exterior orienation parameters in the case when ground control points were at all course. On the contrarily, the difference has been shown in the case of no ground control point at course.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.203-211
• /
• 2009

With supply of the domestic digital camera, the relative importance of the digital camera is coming to be high gradually on aerial photogrammetry, the image of digital camera is more applied in image map or digital topographic map production. But, there are cases that do not have position information or attitude information of each photograph in digital camera results. Therefore, we wish to present additional method to get more accurate photograph control point result. In this study, One is called A method, which is the case of entering positioning information of principal point from topographic map as default values that are need to extract tie point automatically using by 56 pieces of photography that are photographed by DMC to the extent to 5 courses and 35 GCP points. The other is called B-method, which is the case of entering exterior orientation parameters that are processed by block adjustment for A-method using by 4 control points in method-1 as default values. We have analyzed about results per control points arrangement for two cases using MATCH-AT that is photograph control point measurement S/W of Germany INPHO company. As a result of analysis, accuracy of B-method was better than that of A-method, and we could get more accurate results if block adjustments are executed including self calibration. Also, it is more effective in expense side that using self calibration for photograph survey in B-method because can reduce GCP numbers.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.149-156
• /
• 2002

본 연구에서는 항공사진 및 지상사진 등 다양한 형태의 영상자료를 이용하여 도로시설물 정보를 추출하고자 하였다. 지상취득 영상으로는 현재 많이 쓰이고 있으며 비교적 저가품인 일반카메라, 디지털카메라, 비디오카메라에 의하여 촬영된 단사진 영상을 이용하였고, 여기서 추출한 공간자료와 속성자료는 자료기반의 수정과 갱신에 사용하였다. 아울러 단사진 영상으로부터 추출한 공간자료를 이용하여 상대적인 척도로서 수치지도의 생성 가능성을 타진하였다.

• Spatial Information Research
• /
• v.10 no.2
• /
• pp.317-329
• /
• 2002

Coastal landforms such as sand beach and coastal sand dune are changing dynamically, and the research about them is being conducted. Conventionally the leveling method has been applied to measuring heights of dynamic morphological surface in coastal landforms. We applied the photograrmmetric method which was not considered to measure the heights on coastal sand dune’s profile to calculating the heights of coastal sand dune; that is, the heights of unknown points on coastal sand dune’s profile was reckoned from the digital photographs’stereo pairs through bundle adjustment and backward transform of collinearity condition equation. we used six GCPs to perform bundle adjustment. After backward transform the error of heights between surveyed value and computed value was estimated around 10cm. In general, the pole is not adamantly fixed on the surface of coastal sand dune because of its softness, and then the disturbance of coastal sand dune adjoining surveyed area can be made in small area. Digital photogrammetry can solve the problem which conventional leveling method has, and be replaced it.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.78-82
• /
• 2009

최근 국내에는 다차원 공간정보 구축을 위하여 디지털 항공사진 및 항공라이다 장비를 이용하고 있으나, 위 데이터만을 이용하여 세밀하고 사실감 있는 3차원 공간데이터를 구축하는데 제한적이며, 고품질의 Texture Mapping을 위해 지상사진을 이용하지만 인력 및 작업 시간이 많이 소요된다. 이에 해외에서는 사실감 있는 3차원 공간정보 구축을 위하여 연직과 경사사진을 동시에 촬영하는 다각사진촬영시스템을 이용하고 있으며, 본 연구에서는 다각사진촬영시스템 개발시 고려해야할 경사사진 촬영 설계요소에 대하여 분석하였다. 연구결과 촬영고도, 카메라각도에 의하여 경사사진 주점의 거리, 지상해상도, 카메라 화각(FOV), 촬영영역에 대하여 분석할 수 있었다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.3
• /
• pp.281-288
• /
• 2006

Recent increase in the number of pixels of a non-metric digital camera encourages to use it for close-range photogrammetry such as modeling cultural asset and buildings. However, these cameras have to be calibrated far close-range photogrammetry application. For self-calibration, an appropriate pbotograrnmetric network and object field should be designed. In this paper, we studied the effect on self-calibration accuracy changes according to the change of the number of ground control points, dimensions of the ground control points, and the combination of images. We concluded that self-calibration with three photos including a vertical photo can give the stable accuracy of interior orientation parameters and 10 ground control points on a plane can give high accuracy for object reconstruction.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.2
• /
• pp.147-154
• /
• 2003

The close-range photogrammetry is a surveying technique the acquiring the 3D object from 2D geometric appearance shown in the image. Camera treatment is relatively so simple. Camera position refer to the object can be freely adjusted by locating the exposure station at any site. So it is used effectively on a small area or object for survey. In this study, using the digital camera which has capacity of keeping numerical value by itself and easy carrying, we analyze the positioning error according to various change of photographing condition. Also we try to find a effective method of acquiring basis data for 3D monitoring of high-accuracy in sub-pixel degree thorough digital close-range photogrammetry with bundle adjustment for local terrain model generation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.157-163
• /
• 2007

Recently, industrialization of a country is accelerated and request of society infrastructure is raised so national land development is activity view. Accordingly, the search for a wide-ranging buried heritage do acted in large construction region. Because the buried heritage get buried in land that it is necessary to the precision search and research for a record and a preservation. Until now, Surveying techniques of a historic site have made status map, profile and cross section map through leveling survey, total-station survey and sketch of specialist. So, to solve problems existing relic survey or drawing making method have using digital camera these researches rapidly and economically obtain stereo image of object and present a technique that constructs 3D image model for digital photogrammetry method. Also, these researches construct 3D image model for record and preservation of a historic site through site test and in 3D and graphical express a historic site and support works that produce other maps if we need it. offer base data of GIS (Geographic Information System) to collect and analyze overall, information of a historic site.