• The korean journal of orthodontics
• /
• v.32 no.1 s.90
• /
• pp.59-69
• /
• 2002

The purpose of this study was to evaluate the reproducibility of lateral cephalometric landmarks according to radiographic image enhancement, and to contribute to the identification of cephalometric landmarks. Lateral cephalograms of ten individuals were taken and stored into computer. The images were then enhanced up to four grades by Quick Ceph Image Pro$^{TM}$ on condition that the gray-scale equalization number was 50 and the detail enhancement number was 50. After thirty two landmarks were identified on monitor images by five observers, the deviations from the mean, the distances estimated between identified points and the mean point of five identified points, were evaluated for each landmark at each enhancement grade. Through the statistical analysis, following results were obtained. 1. In case of unenhanced radiographic images, the inter-observer reproducibility of the landmarks showed a large variation. 2. The comparison of deviation from the mean according to the degree of radiographic image enhancement for each landmark showed that the inter-observer reproducibility was significantly different at 5 landmarks. 3. The landmark of pterygomaxillary fissure showed higher reproducibility at enhancement grade 1 and 2 images than at unenhanced images. So did the landmark of posterior nasal spine at enhancement grade 1 images, and the landmark of menton at enhancement grade 2, 3 and 4 images respectively. The above results suggest that the reproducibility of some landmarks can be increased by radiographic image enhancement during the identification of the lateral cephalometric landmarks on the monitor.

• The korean journal of orthodontics
• /
• v.32 no.2 s.91
• /
• pp.79-89
• /
• 2002

The purpose of this study is to evaluate the reproducibility and errors in landmark identification of conventional lateral cephalometric radiography and digital lateral cephalometric radiography. Fifteen conventional lateral cephalometric radiographs and fifteen digital lateral cephalometric radiographs were selected in adults with no considerations on sex and craniofacial forms. Each landmark was identified and expressed as the coordinate (x, y). The landmarks were classified into 3 groups. The landmarks of the first identification was T1, identification after one week was T2, and identification after one month was T3. The mean and standard deviation of identification errors between replicates were calculated according to the x and y coordinates. The errors between first identification and second identification were expressed as T2-T1(x), T2-T1(y) and those between first identification and third identification were expressed as T3-T1(x), T2-T1(y). Each was divided into conventional lateral cephalometric radiography and digital lateral cephalometric radiography. The independent t- test was used for statistical analysis of identification errors for the evaluation of reproducibility. The results of this study were as follows ; 1. Generally, the mean and standard deviation of landmark identification errors in digital lateral cephalometric radiography was smaller than those of conventional lateral cephalometric radiography. 2. Only a few landmarks showed statistically significant difference in identification error between conventional lateral cephalometric radiography and digital lateral cephalometric radiography. 3. The enhancement of image quality didn't guarantee decrease in landmark identification error and didn't affect tendency of landmark identification error.

• Explosives and Blasting
• /
• v.26 no.1
• /
• pp.57-66
• /
• 2008

It has been proven that the pre-cracking notches in a blasting hole are applicable to control crack growth along specific direction. This study compared the roughnesses of the fracture plane resulting from test blasts using a regular charge hole and notched charge hole to investigate the effect of the notches of charge hole on the formation of fracture plane. A notch bit system was used to drill the notched hole in the rock specimens. The surfaces of the fracture planes were reconstructed as Digital Elevation Model (DEM) using digital photogrammetric method and the roughnesses of the surfaces were estimated with Surface Roughness Profile Index (SRp).

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.11-21
• /
• 2016

Recently, structure safety management techniques using cutting-edge technology(Displacement senor, sensor of acceleration) has emerged as an important issue owing to the aging of infrastructure such as bridge and building. In general, the structural monitoring system for structure safety management is based on IT technology and it is expensive to install. In this paper developed an image-based structure dynamic characteristic analysis system prototype to assess the damage of structure in a more cost-effective way than traditional structure health monitoring system. The inspector can take a video of buildings or other structures with digital camera or any other devices that is passible to take video, and then using NCC calculation for image processing technique to get natural frequency. This system is analysis of damage of the structure using a compare between the frequency response ratio and functions when problems are occurs send alarm to administrator. This system is easier to install and remove than previous monitoring sensor in economical way.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.393-396
• /
• 2016

Digital image processing is the technical area of processing and analysis with intellectual and efficient ways, which has been commercialized in a variety of applications. However, the noise is occurred in the image data with multiple reasons and various studies have been performed to eliminate the noise. Generally, the types of noise vary by causes and forms, and composite noise is the representative one. Hence, the modified switching filter to process by types of noise was suggested to eliminate composite noise in the image effectively and to have excellent characteristics of edge conservation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.432-432
• /
• 2023

한국건설기술연구원(Korea Institute of Civil Engineering and Building Technology, KICT)의 안동하천연구센터(Andong River Experiment Center, REC)는 다양한 하천 관련 실규모 실험을 수행하기 위해 3개의 수로를 보유하고 있다. 본 연구의 주목적인 실증 실험 계측 결과를 기반으로 3D 게임엔진을 이용하여 물 흐름을 재현하기 위해 A1 수로를 대상구간으로 설정하였다. 실증 실험의 경우 2개의 수문 개도율 조건에서 ADV와 ADCP를 활용하여 계측된 유량 및 유속 결과들을 비교하였으며, 추가적으로 영상 데이터로 부터 표면유속(LS-PIV)을 산정하였다. 3D 게임 엔진은 렌더링 엔진, 물리 엔진, 오디오 엔진, UI 시스템, 게임플레이 프레임워크 등이 잘 융합된 소스코드들과 개발자들이 이용하기 쉬운 방식으로 변환된 툴(tool)로 제공하여 현실 세계를 가상 세계에 시각화하여 구현하는데 큰 장점을 가지고 있다. 또한 기존의 흐름 재현이 가능한 수리/수문 모델링의 경우 특정한 목적으로만 이용가능하고 연산에 소용되는 시간 때문에 실시간 흐름재현이 어렵지만, 3D 게임엔진을 이용하는 경우 다양한 목적과 여러 분야와의 고려가 동시에 가능하며 연산의 단순화를 통해 실시간 흐름 재현이 가능하다는 장점이 있다. 본 연구에서는 언리얼 엔진의 Niagara Fluids와 Fluid flux 툴들을 활용하여 하천실증실험 시설 일부 구간에 대해 물 흐름을 재현하였다. 먼저 하천실험실증시설을 드론과 RTK-GPS를 이용하여 촬영된 결과를 정합하여 3D 게임엔진 기반 흐름 재현을 위한 지형 기초 자료를 구축하였다. 지형 계측 결과를 기반으로 A1 수로 전체 구간을 대상구간으로 설정한 이후 수문 조절을 통해 흐름 조건을 제어할 수 있도록 제작하였으며, 실제 흐름에 대한 계측 결과를 기반으로 재현된 흐름을 대상으로 material 값의 조정(방향 X, Y값을 RGB값으로 변환한 뒤 벡터 길이 값으로 환산)을 통해 0~100 사이 값을 이용하여 유속을 표현하였다. 최근 가상공간 (i.e. 디지털트윈) 관련 시장 성장이 매우 빠르고 다양한 사업에서 해당 기술의 수요가 증가하고 있으며, 본 연구를 통해 물 흐름의 디지털 트윈화를 위한 수단으로서 3D 게임 엔진의 활용 가능성을 확인하였다. 다만 실제 하천의 적용과 하천관리를 위한 실용화를 위해서는 추가적인 연구와 분석이 이루어져야 할 것이다.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_4
• /
• pp.1135-1144
• /
• 2023

Many agricultural reservoirs in South Korea, constructed before 1970, have become aging facilities. The majority of small-scale reservoirs lack measurement systems to ascertain basic specifications and water levels, classifying them as unmeasured reservoirs. Furthermore, continuous sedimentation within the reservoirs and industrial development-induced water quality deterioration lead to reduced water supply capacity and changes in reservoir morphology. This study utilized Light Detection And Ranging (LiDAR) sensors, which provide elevation information and allow for the characterization of surface features, to construct high-resolution Digital Surface Model (DSM) and Digital Elevation Model (DEM) data of reservoir facilities. Additionally, bathymetric measurements based on multibeam echosounders were conducted to propose an updated approach for determining reservoir capacity. Drone-based LiDAR was employed to generate DSM and DEM data with a spatial resolution of 50 cm, enabling the display of elevations of hydraulic structures, such as embankments, spillways, and intake channels. Furthermore, using drone-based hyperspectral imagery, Normalized Difference Vegetation Index (NDVI) and Normalized Difference Water Index (NDWI) were calculated to detect water bodies and verify differences from existing reservoir boundaries. The constructed high-resolution DEM data were integrated with bathymetric measurements to create underwater contour maps, which were used to generate a Triangulated Irregular Network (TIN). The TIN was utilized to calculate the inundation area and volume of the reservoir, yielding results highly consistent with basic specifications. Considering areas that were not surveyed due to underwater vegetation, it is anticipated that this data will be valuable for future updates of reservoir capacity information.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.515-518
• /
• 2011

본 연구는 3차원 인체 데이터 위에 가상 의류를 착장시키는 착장 시뮬레이션 시스템의 구현을 소개 한다. 인체 데이터는 3차원 전신 레이저 스캐너로 계측하였으며 가상의류는 의복의 앞뒷면 촬영 영상으로 하였다. 대상 의류는 원피스, 티셔츠, 바지 등과 같은 비교적 복잡하지 않은 구조의 의류이며, 본 논문에서는 상의 및 원피스의 착장 과정과 바지의 착장 그리고 바지위에 상의를 착장하는 중첩 착장의 과정을 보여준다. 가상 착장 결과로 실제 착장과 동일한 결과를 제공하기 때문에 치수가 자신에게 맞는지의 정보와 착장시의 어울림의 정보가 온라인상에서 육안으로 확인되도록 제공되며, 디지털 의류의 준비도 간단하여, 본 논문의 결과로 새로운 형태의 온라인 의류 판매 방식이 제시될 수 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.9
• /
• pp.877-882
• /
• 2011

In this paper, thermal deformation of a double ring structure using digital image correlation technique (DIC) was measured. The double ring structure consisted of two parts; the inner ring was aluminium which had a large thermal expansion coefficient and the outer ring was titanium which had a small thermal expansion coefficient. We heated the double ring structure from $50^{\circ}C$ to $200^{\circ}C$ in a chamber and at the same time, two cameras captured surface images of the double ring structure. Initially, there was a 21 ${\mu}m$ gap between the inner ring and outer ring. The gap was closed at around $80^{\circ}C$ and after that, two rings expanded together. In order to compare the experimental results with analysis results, a finite element analysis was performed using ANSYS. The results of DIC measurement and ANSYS analysis were compared and agreed well.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1998.06a
• /
• pp.37-42
• /
• 1998

외국에서 개발한 디지털 방송 모니터링 장비는 국내의 규격 및 방송 환경과 상이하여 정확한 오류검색이 불가한 상황이다. 따라서, 국내 방송환경에 적합한 디지털 위성방송의 송출 및 수신상태를 감시할 수 있는 계측 장비가 필요하다. 위성 본방송에 대비하고 위성방송의 안정적 운용을 위하여“디지털 위성방송 모니터링 시스템”을 국내 최초로 개발하였다. 시스템의 구성은 PC에 카드형 수신기를 내장하였으며, 응용 S/W로 다양한 모니터링이 가능하도록 설계하였다. 주요기능은 현재 방송중인 위성 중계기의 RF 레벨 및 채널상태, 영상 및 음성의 송출상태, Service Information의 송출상태를 동시에 검색한다. 그리고, 오류발생시 겨고 메시지를 발송하고 오류복구방안을 제시하며, 모니터링 결과를 저장한다.