• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2000.10a
• /
• pp.40-50
• /
• 2000

본 연구에서는 Rolleiflex 6006 측정용 카메라로 촬영된 사진과 DCS 420 디지털 카메라로부터 촬영된 화상을 이용, 수치근접사진측량을 실시한 후, 조경석의 표면 거칠기 측정 정확도 향상을 위하여 최소제곱법으로 기준평면 또는 기준곡면을 찾아 사용하는 방법을 연구하였으며, 조경석 표면의 연마 이전과 연마 이후의 표면 거칠기를 측정, 비교하여 연마후의 거칠기 감소크기를 산출하고, 측정 정확도를 알아보기 위하여 거칠기가 거의 없는 평면인 돌과 곡면인 돌의 표면 거칠기를 측정한 결과, 그 거칠기를 기대정확도 이상인 각각 $\pm$0.lmm 및 $\pm$0.2mm의 정확도로 측정할 수 있었다. 또한 측정용 카메라인 경우 렌즈왜곡 보정에 있어서 검정자료를 토대로 기준점을 사용하지 않는 직접보정방법인 Newton-Raphson법을 적용하여 기하학적 정확도가 향상된 수치사진화상을 얻을 수 있었으며, DCS 420 디지털 카메라와 윈도우 운영체계인 Visual basic 6.0을 이용하여, 표면 거칠기 측정시스템을 구축함으로써 연마이전 조경석과 연마이후 조경석에 대한 표면 거칠기 및 형상을 정밀 측정할 수 있는 수치근접사진측량기법을 제시할 수 있었다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.3
• /
• pp.55-64
• /
• 2005

This study demonstrates the experiment based on digital photogrammetric processing for acquiring data related to slope monitoring. To apply dose-range digital photos for monitoring road rock slopes, digital elevation models and digital orthophotos were generated and 3D modelling was conducted for the visualization on a digital photogrammetric workstation. These digital photogrammetric products can be utilized as objective and scientific data not only for surveying and analyzing the shape and characteristics of the slopes but also for extracting various engineering data for building the database of the slopes and making the safety diagnosis of the slopes.

• Spatial Information Research
• /
• v.10 no.2
• /
• pp.317-329
• /
• 2002

Coastal landforms such as sand beach and coastal sand dune are changing dynamically, and the research about them is being conducted. Conventionally the leveling method has been applied to measuring heights of dynamic morphological surface in coastal landforms. We applied the photograrmmetric method which was not considered to measure the heights on coastal sand dune’s profile to calculating the heights of coastal sand dune; that is, the heights of unknown points on coastal sand dune’s profile was reckoned from the digital photographs’stereo pairs through bundle adjustment and backward transform of collinearity condition equation. we used six GCPs to perform bundle adjustment. After backward transform the error of heights between surveyed value and computed value was estimated around 10cm. In general, the pole is not adamantly fixed on the surface of coastal sand dune because of its softness, and then the disturbance of coastal sand dune adjoining surveyed area can be made in small area. Digital photogrammetry can solve the problem which conventional leveling method has, and be replaced it.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.4
• /
• pp.365-371
• /
• 2003

Digital high resolution cameras are widely available, and are increasingly use in digital close-range photogrammetry. And photogrammetry instruments are developing rapidly and the precision is improving continuously. The building of 3D terrains of high precision are possible and the calculation of the areas or the earthwork volumes have high precision due to the development of the techlique of the spatial information system using computer. Using the digital camera which has capacity of keeping numerical value by itself and easy carrying, we analyze the positioning error according to various change of photographing condition. Also we try to find a effective method of acquiring basis data for 3D monitoring of high-accuracy in pixel degree through digital close-range photogrammetry with bundle adjustment for local terrain model generation and 3D embodiment of tumulus. In the study is about to efficient analysis of digital information data fer conservation of cultural properties.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.05a
• /
• pp.151-160
• /
• 2004

This research addresses the experimental application of the digital close-range photogrammetric technique for 3D deformation measurement and visualization of road slope. The 3D displacements were extracted by the photo-triangulation based on the bundle adjustment method using the digital imagery. In addition, we produced the digital elevation models, the digital orthorectified images and the 3D perspective view images of the slope employing a digital photogrammetric workstation. Also the inclination map of the slope was generated as the data for monitoring and managing dangerous slopes.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.2
• /
• pp.147-154
• /
• 2003

The close-range photogrammetry is a surveying technique the acquiring the 3D object from 2D geometric appearance shown in the image. Camera treatment is relatively so simple. Camera position refer to the object can be freely adjusted by locating the exposure station at any site. So it is used effectively on a small area or object for survey. In this study, using the digital camera which has capacity of keeping numerical value by itself and easy carrying, we analyze the positioning error according to various change of photographing condition. Also we try to find a effective method of acquiring basis data for 3D monitoring of high-accuracy in sub-pixel degree thorough digital close-range photogrammetry with bundle adjustment for local terrain model generation.

• Journal of Digital Convergence
• /
• v.12 no.8
• /
• pp.295-302
• /
• 2014

Essential to the establishment of such 3D spatial information are the laser scanning technology to obtain high-precision 3D point group data and the photography-metric camera to obtain high-resolution multispectral image information. The photography-metric camera, however, lacks in usability for its broad scope of utilization due to the high purchase price, difficult purchase channel, and low applicability. This study thus set out to investigate a technique to establish multi-dimensional ortho-image data with a single lens reflex digital camera of high speed and easy accessibility for general users. That is, the study remodeled a single lens reflex digital camera and calibrated the remodeled camera to establish 3D multispectral image information, which is the essential data of 3D spatial information. Multi-dimensional ortho-image data were collected by surveying the reference points for stereo photos, taking multispectral shots of the objects, and converting them into ortho-images.

• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.2 s.12
• /
• pp.11-20
• /
• 1998

Although aerial photogrammetry has been used to generate or update digital maps. It is difficult to make the spatial and attribute data for all kinds of objects on the ground with only aerial photogrammetry. Therefore, we are getting informations of the object on the ground through an on-the-spot survey In order to improve accuracy and reliability of on-the-spot survey in this study, we obtained stereo images from high resolution digital camera (1152*864 pixels) and developed the video photogrammetry which was able to determine the three dimensional coordinates from stereo images by applying DLT(Direct Linear Transformation). Also, the developed video photogrammetry could generate and update the spatial and attribute data in digital maps by using a function that could connect three dimensional coordinates with the attribute data.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.306-306
• /
• 2015

기존 토사유출실험 연구는 대체로 유출구에서 유사의 총량을 일정한 시간 간격으로 측정했다. 이 같은 방식으로는 총 토사유출량의 시간적 변화는 알 수 있으나, 토사유출의 공간적 분포 변화는 알 수 없기 때문에 토사유출의 취약지점을 파악하고 이를 제시할 수 없다. 본 연구에서는 이러한 한계를 극복하고자 입체사진측량 기법을 도입하여 토사유출의 공간분포를 측정하고 각 지점이 총 토사유출량에 기여하는 정도를 파악하였다. 토조($2m{\times}1m{\times}0.3m$)로부터 약 1.5 m 높이에서 고해상도 디지털 카메라를 이용하여 토조 내 표면을 촬영하였고, 입체사진측량 기법을 이용해 토조 내 수치표고모형(Digital Elevation Models)을 추출하였다. 수치표고모형 추출 과정에서는 고도값의 오차 범위를 확인하였고 격자 해상도를 다양하게 설정하면서 최적의 격자 해상도를 평가해보았다. 최종적으로 구한 일련의 수치표고모형으로부터 토사유출의 시공간적 변화를 파악할 수 있었으며, 이는 토조 내 토사유출 과정에 대한 보다 세밀한 이해를 가져올 것으로 기대된다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.6
• /
• pp.741-747
• /
• 2009

For construction of 3D virtual city models, airborne digital cameras, laser scanners, multi-oblique photograph systems and other devices are currently being used. With such advanced techniques, precise 3D spatial information can be collected and high quality 3D city models can be built in a considerably large area. The 3D spatial information to be built has to provide the latest information that quickly reflects the causes of any change due to urban development. In this study, a UAV photogrammetric method using low cost UAV and digital camera was proposed to acquire and update 3D spatial information effectively on small areas where information continuously change. In the proposed UAV photogrammetric method, the elements of interior orientation were acquired through camera calibration and the vertical and oblique photographs were taken at 9 points and the 3D drawing of ground control points and buildings was performed using 20 images among the pictured images. This study also analyzed the accuracy of the proposed method comparing with ground survey data and digital map in order to examine whether the method can be used in on-demand 3D spatial information update on relatively small areas.