• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.329-334
• /
• 2004

The electronic nose (E-nose) recently finds its applications in medical diagnosis, specifically on detection of diabetes, pulmonary or gastrointestinal problem, or infections by examining odors in the breath or tissues with its odor characterizing ability. The odor recognition performance of E-nose can be improved by manipulating the sensor array responses of vapors in time-profile forms. The different chemical interactions between the sensor materials and the volatile organic compounds (VOC's) leave unique marks in the signal profiles giving more information than collection of the conventional piecemal features, i.e., maximum sensitivity, signal slopes, rising time. In this study, to use them in vapor recognition task conveniently, a novel time-profile method was proposed, which is adopted from digital image pattern matching. The degrees of matching between 8 different vapors were evaluated by using the proposed method. The test vapors are measured by the silicon-based gas sensor array with 16 CB-polymer composites installed in membrane structure. The results by the proposed method showed clear discrimination of vapor species than by the conventional method.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.1
• /
• pp.33-42
• /
• 1999

Geometrically standardized dental radiographs were taken. We prepared Digital Cu-Equivalent Image Analyzing System for quantitative assessment of mandible bone. Images of radiographs were digitized by means of Quick scanner and personal Mcquintosh computer. NIH image as software was used for analyzing images. A stepwedge composed of 10 steps of 0.1mm copper foil in thickness was used for reference material. This study evaluated the effects of step numbers of copper wedge adopted for calculating equation. kVp and exposure time on the coefficient of determination(r²)of the equation for conversion to Cu-equivalent image and the coefficient of variation and Cu-Eq value(mm) measured at each copper step and alveolar bone of the mandible. The results were as follows: 1. The coefficients of determination(r²) of 10 conversion equations ranged from 0.9996 to 0.9973(mean=0.9988) under 70kVp and 0.16 sec. exposure. The equation showed the highest r was Y=4.75614612-0.06300524x +0.00032367x² -0.00000060x³. 2. The value of r² became lower when the equation was calculated from the copper stepwedge including 1.0mm step. In case of including 0mm step for calculation. the value of r showed variability. 3. The coefficient of variation showed 0.11, 0.20 respectively at each copper step of 0.2, 0.1mm in thickness. Those of the other steps to 0.9 mm ranged from 0.06 to 0.09 in mean value. 4. The mean Cu-Eq value of alveolar bone was 0.14±0.02mm under optimal exposure. The values were lower than the mean under the exposures over 0.20sec. in 60kVp and over 0.16sec. in 70kVp. 5. Under the exposure condition of 60kVp 0.16sec.. the coefficient of variation showed 0.03. 0.05 respectively at each copper-step of 0.3, 0.2mm in thickness. The value of r² showed over 0.9991 from both 9 and 10 steps of copper. The Cu-Eq value and the coefficient of variation was 0.14±0.01mm and 0.07 at alveolar bone respectively. In summary. A clinical application of this system seemed to be useful for assessment of quantitative assessment of alveolar provided high coefficient of determination is obtained by the modified adoption of copper step numbers and the low coefficient of variation for the range of Cu-Equivalent value of alveolar bone from optimal kVp and exposure time for each x-ray machine.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.107-116
• /
• 2015

In compliance with digital device growth, the proliferation of high-tech computers, the availability of high quality and inexpensive video cameras, the demands for automated video analysis is increasing, especially in field of intelligent monitor system, video compression and robot vision. That is why object tracking of computer vision comes into the spotlight. Tracking is the process of locating a moving object over time using a camera. The consideration of object's scale, rotation and shape deformation is the most important thing in robust object tracking. In this paper, we propose a robust object tracking scheme using Random Forest. Specifically, an object detection scheme based on region covariance and ZNCC(zeros mean normalized cross correlation) is adopted for estimating accurate object location. Next, the detected region will be divided into five regions for random forest-based learning. The five regions are verified by random forest. The verified regions are put into the model pool. Finally, the input model is updated for the object location correction when the region does not contain the object. The experiments shows that the proposed method produces better accurate performance with respect to object location than the existing methods.

• Journal of The Korean Association For Science Education
• /
• v.36 no.3
• /
• pp.499-507
• /
• 2016

A flipped learning class was held in an attempt to overcome the limits of lecture-type classes in pre-service science teacher training and to provide a student-oriented education suitable for digital native generation. The principles of teaching-learning in flipped learning were applied to the general ADDIE model to design the class; learning materials were developed accordingly. The developed flipped learning materials and class design were verified for their validity using an expert panel's Delphi method and validity test, in which the validity was verified with 0.75 CVR. The developed flipped learning materials were applied to the theory of science education and the instructional effectiveness was analyzed. The results suggest that the students' motivation to study, interest, and confidence in learning increased; however, their satisfaction in class decreased by 30% as compared to the lecture-type class and their self-confidence in the improvement of their academic achievement was not sufficient. In order for a flipped learning class to be successful, the class should be small in size, which would ensure appropriate teacher-student communication and individualized learning; also, the students' burden of learning should be reduced and accessibility to video materials for pre-class learning should be reinforced.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.243-246
• /
• 2013

Recently, the 4th generation of mobile communications in Korea with anyone supports was supported high speed multimedia communication services. With the launch of Apple iPhone, there is an explosion of interest in Smartphone itself as well as Internet-based services using Smartphone are being revitalized. Smartphone users, opinion experts almost of the economically active population is using, it has reached the saturation past the early stages of formation. In 1989, the 1st generation mobile communication service has been started with the analog voice service. After this, the 2nd generation mobile communication service for short messages and digital voices has been developed. And, the 3rd generation service of low speed data and low quality videos has been realized in 2000s. The very high speed data service of LTE (long term evolution), which is the 4th generation mobile communication service standards, had been in July 2011. and the subscribers are increasing constantly. However, changes in communication technology, has given an economical cost to Smartphone users. Therefore, the purposes of this study was trending of the communication cost according to the change in the communication technology of the mobile communication industry.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.65-71
• /
• 2017

Digital images and videos are subject to various types of noise during storage and transmission. Among these noises, Salt & Pepper noise degrades the compression efficiency of the original data and causing deterioration of performance in edge detection or segmentation used in an image processing method. In order to mitigate this noise, there are many filters such as Median Filter, Weighted Median Filter, Center Weighted Median Filter, Switching Weighted Median Filter and Adaptive Median Filter. However these methods are inferior in performance at high noise density. In this paper we propose a new type of filter for noise mitigation in wireless communication environment where Salt & Pepper noise occurs. The proposed filter detects the location of the damaged pixel by Salt & Pepper noise detection and mitigates the noise by using adjacent pixel values which are not damaged in a certain area. Among the proposed filters, the performance of the filter using the $3{\times}3$ error mask is compared with that of the conventional methods and it is confirmed that when density of noise in the image is 95%, their performances are improved as 13.24 dB compared to MF and 13.09 dB compared to AMF.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.7
• /
• pp.761-768
• /
• 2010

This paper presents an effective method to achieve the wideband waveform for high resolution SAR(Synthetic Aperture Radar) using the frequency multiplication technique. And also this paper analyzes the root causes for the spectral regrowth due to 3rd-order intermodulation in chirp bandwidth expansion scheme using quadrature modulator and frequency multipliers. The amplitude and phase imbalance requirement are defined based on the simulation results in terms of quadrature channel imbalance. This minimizes the degradation of range resolution, peak sidelobe ratio and integrated sidelobe ratio. The wideband chirp generator using the frequency multiplier and memory map scheme was manufactured and the compensation technique was presented to reduce the spectral regrowth of SAR waveform by minimizing the amplitude and phase imbalance. After I and Q channel imbalance adjustment, the carrier level reduces －28.7 dBm to －53.4 dBm. Chirp signal with 150 MHz bandwidth at S-band expands to 600 MHz bandwidth at X-band. The sidelobe levels are reduced by about 8 to 9 dB by compensating the amplitude balance between I and Q channels.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.1
• /
• pp.97-108
• /
• 2018

The purpose of this study is to propose the construction of a visibility analysis model, which is the basis of the analysis for landscape management on the heritage sites such as historic villages and scenic sites. Results of the visibility analysis using DEM and the visibility analysis of DSM based on 3D mapping data are compared as follows: Precision level of the extracted data was confirmed to be less than 6.5cm, based on RTK survey results produced by constructing orthoimage data and DSM from the digital data of 2cm-class GSD(Ground Sample Distance) obtained by using a small UAV(Unmanned Aerial Vehicle). As a result of comparing the visibility analysis data of Digital Surface Model (DSM) using a small UAV with Digital Elevation Model(DEM) applying the height of the building to the Digital Topographic Map, it was confirmed that more realistic visibility analysis can be accomplished by applying DSM, as the structures such as fences, trees, and houses are reflected in the topographic data. The visibility analysis model using the 3D mapping technique can efficiently obtain the constantly changing topographic information when needed, by immediately constructing the data by utilizing a small UAV. It seems to be possible to propose a reasonable analysis result for preservation management such as landscape evaluation of cultural property.

• Applied Microscopy
• /
• v.36 no.1
• /
• pp.7-16
• /
• 2006

A new remote access system for a 1.3 MV high voltage electron microscope has been developed. Almost all essential functions for HVEM operation, huck as stage control, specimen tilting, TV camera selection and image recording, are successfully embedded into this prototype of the remote system. Particularly, this system permits perfect and precise operation of the goniometer and also controls the high resolution digital camera via simple Web browsers. Transmission of control signals and communication with the microscope is accomplished via the global ring network for advanced applications development (GLORIAD). This fact makes it possible to realize virtual laboratory to carry out practical national and international HVEM collaboration by using the present system

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2003.11a
• /
• pp.75-78
• /
• 2003

MPEG-4 표준은 저작자가 정지영상, 텍스트, 2D/3D 그래픽스, 오디오, 심지어 임의형의 비디오 등과 같이 다양한 형태의 객체들을 개별적으로 구성하고 이들을 시/공간자적으로 다루기 용이하게 해 준다. 이와 같은 객체 기반 코딩 특성에 의해서 대화형 방송 콘텐츠를 제작하는데 가장 유용한 방식으로 고려할 수 있다. 피러나, 콘텐츠의 제작, 전송, 소비 관전에서 고려해 달 때, 콘텐츠 제작자 또는 저작권자의 보호 및 관리가 필요하게 되었다. 이에 따라 최근에는 OPIMA (Open Platform Initiative for Multimedia Access), SDMI (Secure Digital Music Initiative) and MPEG(Moving Picture Expert Group) OPIMATfMr(Intellectual Property Management & Protection)와 같은 국제 표준 단체들이 콘텐츠 보호 및 관리에 대한 관심을 가지게 되었다. 특히, MPEG의 경우에 MPEG-4 IPMP를 표준화하여 디지털 콘텐츠와 저작권에 대한 보호를 체계적이고 효과적으로 다루는 연구를 가장 활발히 해오고 있다. 이 논문에서 우리는 MPEG-4 콘텐츠 저작자가 MPEG-4 규격에 맞게 보호화 된 객체 기반 방송용 콘텐츠를 쉽고 편리하게 제작학 수 있도록 하기 위한 MPEG씨 콘텐츠 및 저자권 보호를 위한 MPEG-4 IPMP 저작 도구를 제안하고자 한다. 제안한 MPEG-4 콘텐츠 및 저작권 보호 저작 도구는 저작자에게 친근한 사용자 인터페이스를 제공하여 편집 및 수정이 용이한 텍스트 포맷인 IPMP회된 XMT(extensible Mpeg-4 Textual format) 파일을 생성한다. 또한, 콘텐츠 전송 및 저장의 효율성을 위해 이진 포멧인 IPMP화된 MP4 파일을 생성할 수 있다.으로써, 에러 이미지가 가지고 있는 엔트로피에 좀 근접하게 코딩을 할 수 있게 되었다. 이 방법은 실제로 Arithmetic Coder를 이용하는 다른 압축 방법에 그리고 적용할 수 있다. 실험 결과 압축효율은 JPEG-LS보다 약 $5\%$의 압축 성능 개선이 있었으며, CALIC과는 대등한 압축률을 보이며, 부호화/복호화 속도는 CALIC보다 우수한 것으로 나타났다.우 $23.87\%$($18.00\~30.91\%$), 갑폭 $23.99\%$($17.82\~30.48\%$), 체중 $91.51\%$($58.86\~129.14\%$)이였으며 성장율은 사육 온도구간별 차는 없었다.20 km 까지의 지점들(지점 2에서 지점 6)에서 매우 높은 값을 보이며 이는 조석작용으로 해수와 담수가 강제혼합되면서 표층퇴적물이 재부유하기 때문이라고 판단된다. 영양염류는 월별로 다소의 차이는 있으나, 대체적으로 지점 1과 2에서 가장 낮고, 상류로 갈수록 점차 증가하며 지점 7 상류역이 하류역에 비해 높은 농도이다. 월별로는 7월에 규산염, 용존무기태질소 및 암모니아의 농도가 가장 높은 반면에 용존산소포화도는 가장 낮다. 그러나 지점 14 상류역에서는 5월에 측정한 용존무기태질소, 암모니아, 인산염 및 COD 값이 7월보다 다소 높거나 비슷하다. 한편 영양염류와 COD값은 대체적으로 8월에 가장 낮으나 용존산소포화도는 가장 높다.출조건은 $100^{\circ}C$에서 1분간의 고온단시간 추출이 적합하였다. 증가를 나타내었는데, 저장기간에 따른 물성의 변화는 숭어에 비하여 붕장어가 적었다.양식산은 aspartic acid 및 proline이 많았다. 또한 잉어는 천연산이