• The Journal of the Acoustical Society of Korea
• /
• v.29 no.3
• /
• pp.191-199
• /
• 2010

Physical modeling is a synthesis method of high quality sound which is similar to real sound for musical instruments. However, since physical modeling requires a lot of parameters to synthesize sound of a musical instrument, it prevents real-time processing for the musical instrument which supports a large number of sounds simultaneously. To solve this problem, this paper proposes a single instruction multiple data (SIMD) parallel processor that supports real-time processing of sound synthesis of guitar, a representative plucked string musical instrument. To control six strings of guitar, we used a SIMD parallel processor which consists of six processing elements (PEs). Each PE supports modeling of the corresponding string. The proposed SIMD processor can generate synthesized sounds of six strings simultaneously when a parallel synthesis algorithm receives excitation signals and parameters of each string as an input. Experimental results using a sampling rate 44.1 kHz and 16 bits quantization indicate that synthesis sounds using the proposed parallel processor were very similar to original sound. In addition, the proposed parallel processor outperforms commercial TI's TMS320C6416 in terms of execution time (8.9x better) and energy efficiency (39.8x better).

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.3
• /
• pp.215-224
• /
• 2003

This paper presents an electronic ballast using a novel complex modulation method for the metal halide lamp. The proposed modulation method, which has a modulating signal of swept complex frequency, can eliminate the acoustic resonance more effectively than the conventional modulation method, which has a modulating signal of constant frequency. For the purpose of future application specific integrated circuits (ASIC). the controller of the proposed ballast has been designed only with erasable programmable logic devices (EPLDs), but without a microprocessor. In this paper, detailed proposed modulation schemes are described and experimental results on the proto type 150W metal halide lamp ballast with the proposed modulation method ate discussed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.1
• /
• pp.30-35
• /
• 2004

In a switched reluctance motor drive, it is important to synchronize the stator phase excitation with the rotor position, Therefore the position of rotor is an essential information. Although high resolution optical encoder/resolvers we used to provide a precise position information, these sensors are expensive. And switching angles synchronizing using sensorless technique has some problems like a reliability and fluctuating of the preset value in the high-speed region, which is caused by the sampling period of the microprocessor. In this paper, a low cost analog encoder suitable for practical applications is proposed. And the control algorithm to generate switching signals using a simple digital logic is presented. The validity of the proposed analog encoder with a proper logic controller is verified from the experiments.

• The Journal of Information Technology
• /
• v.4 no.4
• /
• pp.51-63
• /
• 2001

Residue Number System has carry free operation and parallelism each modulus, So it is used for special purpose processor such as Digital Signal Processing and Neuron Processor. Magnitude comparison and sign detection are in need of Mixed Radix Conversion, and these operations are impediment to improve the operation speed. So in this Paper, MRC(Mixed Radix Converter) is designed using modified partitioned residue to speed up the operation of MRC, so it has progressed maximum twice operation time but increased the size of converter comparison to other converter.

• The Journal of Information Technology
• /
• v.9 no.1
• /
• pp.33-39
• /
• 2006

This study is for the contents of development to the hardware system and software driving algorithm to implement the frequency band of about 7KHz los pass digital filter which has the cut-off frequency of 392Hz by interfacing of a microprocessor with its peripheral analog-to-digital converter chip and digital-to-analog converter chip. The simplicity of digital filter design without difficulty and the implementation of programmed digital filter can be realized by providing the interfacing method to implement the law pass digital filter for the biological signals and the realization method of computer algorithm by a microprocessor.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.507-509
• /
• 2023

본 논문에서는 DSP (Digital Signal Processing)를 이용한 차량용 레이다 수평안정화장치 구동 전략을 제안한다. 지대공 유도 미사일용 차량용 레이다는 전방향으로 일정 속도로 회전하며 감시정찰 임무를 수행한다. 수평안정화장치는 4세트의 수평구동모듈을 이용하여 차량 플랫폼의 수평을 유지하여 레이다의 안정적인 회전을 가능하게 한다. 이를 실시간으로 구현하기 위해 임베디드시스템인 DSP를 적용하여 경사도를 측정하고, 구동모듈에 구동 명령을 인가하여 수평을 유지한다. 수평구동모터는 감속기를 통하여 모터 토크를 증가시켜 수평 안정 동작을 수행한다. 본 논문에서는 수평구동모듈 1세트를 모델링하여 수평안정화장치를 축소 구현한다. 제안하는 구동 전략의 유효성은 시뮬레이션으로 입증한다.

• Journal of Digital Contents Society
• /
• v.8 no.3
• /
• pp.341-346
• /
• 2007

The purpose of this paper is to propose the design of VADSM(Value-Added Digital Speaker Module) which tunes up the speaker unit by measuring the speaker's frequency responses and controlling EQ band. This module can reduce audible distortions at particular frequency band and improve some flatness in the speaker's frequency response. VADSM is composed of DSP AMP and speaker unit. When a speaker transforms electrical signal to sound, the magnitude response at some frequencies are more or less than normal level. So, DSP AMP can be used to adjust those magnitudes up or down by controlling its EQ bands.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.1
• /
• pp.7-17
• /
• 1997

During the past decade, there were many well-established theories for the adaptive control of linear systems, but there exists relatively little general theory for the adaptive control of nonlinear systems. Adaptive control technique is essential for providing a stable and robust performance for application of industrial robot control. Neural network computing methods provide one approach to the development of adaptive and learning behavior in robotic system for manufacturing. Computational neural networks have been demonstrated which exhibit capabilities for supervised learning, matching, and generalization for problems on an experimental scale. Supervised learning could improve the efficiency of training and development of robotic systems. In this paper, a new scheme of adaptive-neuro control system to implement real-time control of robot manipulator using digital signal processors is proposed. Digital signal processors, DSPs, are micro-processors that are developed particularly for fast numerical computations involving sums and products of variables. The proposed neuro control algorithm is one of learning a model based error back-propagation scheme using Lyapunov stability analysis method. The proposed adaptive-neuro control scheme is illustrated to be an efficient control scheme for implementation of real-time control for SCARA robot with four-axes by experiment.

• Journal of Digital Contents Society
• /
• v.18 no.7
• /
• pp.1451-1456
• /
• 2017

In this research we discuss an integrated actuator-control system for advanced control of a smart Shape Memory Alloy (SMA) actuator. Toward this goal, we designed and fabricated an actuator-control module combining two SMA actuating units with a single-chip microprocessor, two different sensing elements, and an actuator driver. In our proposed system, sensing elements include a 6-axis single-chip motion sensor for orientation measurement and a circuit for resistance measurement of SMA wires. We experimentally verified our proposed actuator-control system using actuator driving, sensor data readings, and communication tests.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.7 no.3
• /
• pp.27-33
• /
• 1993

This paper presents the &tal controller for driving high frequency voltage fed PWM inverter that carrier frequency is over 2OkHz.We analyzed the conventional PWM to select a proper PWM pattern. as the result, obtained PWM pattern of the controller in which asynchronus staircase sinusoidal waveform is used as reference signal, and variable carrier ratio method was used for PWM control. The PWM controller is designed by fully digital method. Especially, Thk proposed controller is consisted of 8 bit one-chip microprocessor and digital logic. the former is for arithmetic and data processing, and the latter is for PWM pattern synthesis. Therefore, The responsibility and controllability is improved. Also, Data processing capability is improved using proper program to output modulation index with 9 bits. Circuits configuration of digital controller are made up of one chip 8051 and EPLD, and its controllability is tested by operating voltage fed inverter. Harmonics and current waveform is evaluated and analyzed for the voltage fed inverter system.