• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.6
• /
• pp.303-309
• /
• 2014

Chaos communication system can improve a system security due to characteristics of non-periodic, non-predictability, broadband signal and easy implementation. Also, chaos signal is sensitive to initial conditions of chaos map. By these reasons, security of chaos communication system is superior to digital communication system. BER performance of COOK modulation system is better than other chaos modulation systems, even if COOK modulation system uses an asynchronous receiver. However, security and safety of COOK modulated signal are worse than other chaos modulation systems, because information bits can be easily predicted from COOK modulated signal. In this paper, for security improvement of COOK modulated signal, we propose a novel Scrambling COOK modulation system by applying the scrambling method. Conventional COOK modulated signal can be predicted, because chaos signal is generated when data is only 1. However, proposed system cannot be predicted, because chaos signal is generated when data is 0 or 1. Therefore, security and safety of transmitted signal in scrambling COOK modulation system is superior to conventional COOK modulation system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.2
• /
• pp.61-67
• /
• 2012

In this paper, In this paper, we consider a dynamic range in the frequency converter to obtain a high conversion gain and linearity while operating area proposed to broaden the design. Super-heterodyne RF Front-End style was applied to the active mixer stage, GaAs devices were used. Circuit design easy and simple forms benefit circuit is constructed in the drain mixer, passive mixer with the operating area were compared and analyzed. The simulation results of the conversion gain of 2.4dB and 0.2dBm about a gain-compression point, and showed the dynamic range of 71.9dB, when compared with passive mixers, dynamic range of approximately 6dB improvement was identified. Measurements of an approximately 2dB conversion gain and-1.0dBm of the gain-compression point, and confirmed that the active area of 71.1dB. When compared with passive mixers, dynamic range of is reduced by approximately 8dB has been improved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.6
• /
• pp.2196-2201
• /
• 2010

The video transmission system using OFDM method at 18GHz frequency band was developed for wireless video transmission from subway to monitoring center when subway running. It is composed of digital modulation board and RF board. And it has a robust characteristics of multipath fading in subway tunnels at 18GHz. To verify the system, we used spectrum analyzer for analysing the output of transmission system and get the results that it has 350MHz frequency, 8MHz bandwidth and -19dBm channel power. Also we tested video receiving using MPEG-2 encoder and got good quality images.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.5
• /
• pp.413-417
• /
• 2014

In coherent superhigh speed optical transmission link, compensating the system impairments are critical issues. Among these issues, phase noise and carrier frequency offset are the most important impairments which interrupt the signal recovery. This paper suggests a algorithm of digital signal processing that compensates the phase noise and carrier frequency offset and verified its validity. The suggested digital signal processing algorithm has a lower computational complexity compared with the previous algorithms, so it can ease the burden of signal processing at the receiver to provide high speed optical transmission system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.161-167
• /
• 2017

Recently, small radar has been reduced in size and power consumption to cope with various operating environments. It also requires the development of a small millimeter wave radar with high range resolution to disable the system of target with a single strike. In this paper, we design and implement a signal processor that can be used in small millimeter wave radar. The signal processor for the small millmeter wave radar is designed with a digital IF(Intermediate Frequency) receiver and DFT(Discrete Fourier Transform) module capable of real time FFT operation for miniaturization and low power consumption. Also it was to leverage the FPGA(Field Programmable Gate Array) and DAC(Digital Analog Converter) as a means for correcting the distortion of signals that can occur in the receive path of the small millimeter wave radar to create a RF signal that is used by the system. Finally, we verified the signal processor presented through performance test

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.79-85
• /
• 2019

Recently, small radar require the development of small millimeter wave radar with high distance resolution to disable the target's system with a single strike. Small millimeter wave radar with high distance resolution need to process large amounts of data in real time to acquire and track target. In this paper, we summarized the real-time data preprocessing method to process the large amount of data required for small millimeter wave radar. In addition, the digital IF(Intermediate Frequency) receiver, Window processing, and, DFT(Discrete Fourier Transform) functions presented by real-time data preprocessing are implemented using FPGA(Field Programmable Gate Array). Finally the implemented real-time data preprocessing module was applied to the signal processor for small millimeter wave radar and verified by performance test related to the real-time preprocessing function.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.649-653
• /
• 2020

GPS is a representative satellite navigation system that provides users with accurate location and time information. GPS L1 C / A is opened for civilian and thus utilized in various fields. When the satellite signal reaches the receiver, signal acquisition unit of the digital signal processing hardware searches and acquires the signal among visible satellites. The signal acquisition unit has different implementation methods depending on the signal searching method, such as serial search acquisition, parallel frequency search, parallel code phase search. In this paper, we compare and analyze the three representative acquisition hardwares using live GPS L1 C/A signals. According to the comparison, the parallel code phase search acquisition outperforms the other methods due to reduction of the number of the searchings and a high resolution.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.501-509
• /
• 2011

Software defined radio(SDR) has a goal that places the analog-to-digital converter(ADC) as near the antenna as possible. But current technique actually can't do analog-to-digital converting about RF band signals. So one method is studying that samples RF band signals to IF band. One of the ways Sub-Sampling technique can convert signals from RF band to IF band without oscillator. If Sub-Sampling technique is used, over 2 bands can convert signals from RF band to IF band. But due to the filter performance in RF band, it is possible to generate interference between signals that is converted in low frequency band. The effect degrades performance. In this paper, we propose one method that uses time division multiplexing(TDM) method as a solution to avoid interference between signals. By doing TDM and Sub-Sampling at the same time that method can get signals without large changes of structures.

• Journal of KIISE:Information Networking
• /
• v.33 no.2
• /
• pp.139-148
• /
• 2006

Recently with the advancement of local wireless communication technologies, digital trends of audio contents and devices are paving the way for new experiences to network-based audio streaming services. In this paper, we present the Wireless Audio Sharing (WASH) technology over Bluetooth and Wireless Local Area Network (WLAN). WASH system provides an audio sharing mechanism over multiple users and also provides stereo audio streaming between Bluetooth-enabled devices and Universal Plug and Play (UPnP) media devices connected to wired/wireless LANs. To achieve these, we extended the Bluetooth audio distribution profile and combined the extended profile with the UPnP AV architecture. With the implementation of this WASH technology, we show some experimental results of the stereo audio streaming in a real environment.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.8
• /
• pp.129-135
• /
• 2011

In this paper, we propose a multi target's elevation angle estimation method using multi beam forming technique. This method make a stacked beam to digital processing a received signal in array element. There can be desired receiving beam to application weight value at antenna element in beam forming. Currently, we are to make multi stacked beam using fast fourier transform in stead of phase shifter to be a computer performance much improvement. Also, we improve multi beam directivity using beam steering error correction technique in order to beam steering to desired direction in receiver. Through simulation, we show that the proposed elevation estimation method based on fast fourier transform and beam steering error correction technique, improves th performance of target estimation compared to previous method.