• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.7
• /
• pp.545-551
• /
• 2013

Timing recovery loop composed of the Timing Error Detector(TED), loop filter and resampler is widely used for the timing synchronization in MQASK receivers. Since TED is sensitive to the delay between the symbol period of the signal and sampling period, the output is averaged out when the symbol rate and sampling rate are quite different the recovery loop cannot work at all. This paper presents a sampling frequency discriminator (SRD), which detects the frequency offset of the sampling clock to the symbol clock of the MQASK data transmitted. Employing the SRD, the closed loop timing recovery scheme performs the frequency-aided timing acquisition and achieve the synchronization at extremely high sampling frequency offset, which can be used in variable symbol rate MQASK receivers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1805-1811
• /
• 2005

We analyzed of the receiver which received OOK and the FSK transmission signal that were a general digital transmission technique in a WDM system. We expressed various error probability with the m which was bandwidth and a bit numerical function and carried out performance evaluation of a receiver in a performance evaluation way. When error probability was $10^{-4}$ which is m=10, as for the receive sensitivity of OOK, the $1.7{\times}10^2$, FSK got $2.2{\times}10^2$ through simulation. And the receive sensitivity of OOK and FSK was able to get each $2.15{\times}10^2$ and $3.07{\times}10^2$ when it was error probability of $10^{-9}$ which is m = 25. Transmission of 23Gb/S showed that it was possible when we does the $10^{-9}$ that was basis error probability of a light communication system with a basis through this, and a coding profit was with for and transmission capacity of 75Gb/s confirmed that it was possible if a code rate was with 0.8.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1520-1525
• /
• 2009

In this paper, we study and simulate the suggested position control system using GPS and USN to replace the existing control system of a crane. For the correct approach, the position control system of a crane is divided into the control system of the ground station and the mobile station The hardware is comprised of GPS receiving module to receive the position control data of a crane from GPS satellites, bluetooth communication module for the data communication between the ground station and the mobile station, supersonic sensor module for a precise position control of a crane, motor to replace a crane roller, embedded MCU(ATmega128L) and so on. In here, an embedded MCU controls GPS receiving module, bluetooth communication module and supersonic sensor module. The Software is comprised of three programs. Three programs are the program to filter GGA output part in a receiving data of GPS receiving module, the driving program for supersonic sensor module, the digital map program to monitor a crane location. From the simulation results, it is demonstrated that the proposed system has the capability of crane position control with 1cm precision.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.8
• /
• pp.1543-1548
• /
• 2009

In this paper, a high speed code synchronization circuit is proposed. for fast code synchronization, matched filler method is used for initial code acquisition with two channel correlators. Particular frequency patterns of the limited number having the information about PN code start time are composed and transmitted repeatedly to increase the probability of accurate initial synchronization. And digital frequency synthesizer is proposed. And it's performance is analyzed theoretically. The analysis show that fast frequency hopping is possible in frequency hopping system that use digital frequency synthesizer.

• Journal of Internet Computing and Services
• /
• v.12 no.3
• /
• pp.111-117
• /
• 2011

In this paper, the BER(Bit Error Rate) performance of a DVB-T2(Second Generation Digital Terrestrial Television Broadcasting System) in MISO(Multiple Input Single Output) transmission mode is evaluated by the computer simulation. In the DVB-T2 receiver, an IDD(Iterative Demapping and Decoder) technique is employed that exchanges extrinsic information between the demapper and the LDPC decoder. Simulation results show that the IDD-based DVB-T2 receiver in MISO transmission mode provides 2dB gain at BER of $10^{-4}$ but suffer from the frequency offsets between transmit antennas.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.157-159
• /
• 2011

현재는 국토해양부의 "도로터널 방재시설 설치 지침"에 따라 1종 도로 터널 내 아날로그 AM/FM 라디오 재난방송시스템이 설치되어 운영 중이나 T-DMB의 경우 관련 시스템이 개발이 되어 있지 않았다. T-DMB는 개인용, 휴대용, 이동형의 디지털방송매체로서의 특징을 가지고 있으며 최근들어 수신기 보급 증가로 새로운 재난방송 매체로 부상하고 있는 현실을 감안하면 터널 및 지하공간에서 T-DMB 방송망과 수신기를 활용한 국지적 재난방송 기술 개발은 매우 필요하다. 이에 본 논문은 기존 T-DMB 방송서비스 권역 내에서 터널 및 지하공간 등 T-DMB 수신환경이 열악한 지역에서 평상시에는 T-DMB 방송을 중계하여 수신환경을 개선하고 재난발생 시에는 기존 T-DMB 단말기로 수신 가능하며 각 재난상황에 맞는 맞춤형 재난경보방송을 송신하는 T-DMB 재난방송시스템 및 관련기술을 소개한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.07a
• /
• pp.142-144
• /
• 2012

T-DMB는 개인용, 휴대용, 이동형의 디지털방송매체로서의 특징을 가지고 있으며 최근들어 수신기 보급 증가로 새로운 재난방송 매체로 부상하고 있다. 그러나 현재의 T-DMB 기반 재난방송 기술은 T-DMB를 시청하고 있어야만 재난정보 수신이 가능하다는 한계를 갖고 있다. 이에 본 논문은 기존 T-DMB를 시청해야만 재난정보 수신이 가능한 기존 T-DMB 재난방송 서비스의 한계를 뛰어 넘어 재난발생시 수신기가 자동으로 재난방송신호를 인지하여 T-DMB를 시청하지 않더라도 재난정보를 제공하고 평상시 지역정보, 날씨 등 공공서비스 정보를 제공하는 T-DMB 재난방송 서비스 기술을 소개한다.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.67.1-67.1
• /
• 2011

태양으로부터 날아오는 고에너지 하전 입자들은 인공위성이나 지구의 통신장비에 심각한 고장을 일으킬 수 있다. 이런 사고를 방지하기 위해서는 사전에 태양풍의 물리량을 알아내는 것이 중요하다. 이를 위해 inter planetary scintillation 현상을 이용하여 태양풍의 운동을 예보하는 시스템을 전파연구소와 협력하여 개발할 예정이다. 그 첫 단계로 이 시스템보다 작은 규모의 시제품을 만들어 동작을 입증하고자 한다. 이 시제품은 각각 16개의 다이폴 안테나로 구성된 타일 3개로 이루어져 있다. 다이폴 안테나들의 중심주파수는 350MHz이고, 대역폭은 약10MHz이다. 48개의 다이폴 안테나들의 총 집광면적은 약 30m2이고, 타일 내의 다이폴 안테나들을 나선형으로 배열해 grating lobe의 크기를 감소시켰다. 각 안테나에서 나오는 신호는 저 잡음의 LNA를 이용해 증폭하여 beam former로 인가된다. Beam former는 안테나에서 나오는 신호의 위상을 조절하고 합쳐서 약 15도 크기의 빔을 만들고 전자적으로 천체를 추적한다. Beam former에서 나온 신호는 수신기에서 저주파의 신호로 변환되는데, 국부발진기를 조절하여 radio frequency interference에 능동적으로 대처할 수 있도록 하였다. 수신기에서 나오는 아날로그 신호는 digitizer를 최대 107sps의 빠르기로 2바이트의 디지털 신호로 전환된다. Labview 프로그램을 사용하여 3개의 타일에서 나온 신호를 합성해서 태양 근처의 전파원을 추적하도록 하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9A
• /
• pp.882-890
• /
• 2008

To overcome the limit of the time-domain based channel estimation caused by the ADC speed, this paper present a new BPM-UWB receiver where the channel estimations and the compensations are digitally performed in the frequency domain. We theoretically show that the channel estimation can be accomplished by exploiting the periodicity of a training sequence consisting of finite number of pulses. We also present the digital receiver structure to implement the proposed system and derive its BER performances. Through computer simulations, we show the proposed receiver can dramatically improve the BER performances due to the incorporation of the estimated channel frequency response.

• Journal of KIISE:Software and Applications
• /
• v.30 no.10
• /
• pp.925-937
• /
• 2003

The input of digital TV software is the Transport Stream, which utilizes the moving picture compression technique, MPEC-2 (Moving Picture Experts Groups-2). MPEG-2 TS consists of the complicated table hierarchy and internal relationships, as well as the various restrictions with regards to system standard of digital TV software in determining the field values of transport stream. However, the general MPEG-2 TS generation tool produces transport streams solely based on the MPEG-2 TS specification itself, and does not consider the interaction between modulo features or modules themselves, which construct digital TV software. In this paper, we propose a method to systematically generate MPEG-2 TS test data, namely‘Test Stream’, for digital TV software. We present the experiment result where the test stream derived from our developed tool according to the proposed method was applied to the actual digital TV software settop-box, and then analyze the result. Apart from other existing MPEG-2 TS generation tools, the advantage of our method is that not only is it capable of generating various levels of test streams including digital TV software module, integration, and system testing, but also detecting errors and analyzing their causes.