• Korean Journal of Remote Sensing
• /
• v.35 no.5_1
• /
• pp.693-703
• /
• 2019

Long-term coastal topographical data is critical for analyzing temporal and spatial changes in shorelines. Especially understanding the change trends is essential for future coastal management. For this research, in the data preparation, we obtained digital aerial images, terrestrial laser scanning data and UAV images in the year of 2009. 2018 and 2019 respectively. Also tidal observation data obtained by the Korea Hydrographic and Oceanographic Agency were used for Bangamoeri beach located in Ansan, Gyeonggi-do. In the process of it, we applied the photogrammetric technique to extract the coastline of 4.40 m from the stereo images of 2009 by stereoscopic viewing. In 2018, digital elevation model was generated by using the raw data obtained from the laser scanner and the corresponding shoreline was semi-automatically extracted. In 2019, a digital elevation model was generated from the drone images to extract the coastline. Finally the change rate of shorelines was calculated using Digital Shoreline Analysis System. Also qualitative analysis was presented.

• The Korean Journal of Pharmacology
• /
• v.17 no.1 s.28
• /
• pp.9-15
• /
• 1981

Aconiti tuber butanol fraction, which is isolated from the chloroform insoluble and water soluble extract of Aconitum volubile, has been recently known to have a potent positive inotropic effect in the isolated cardiac muscle preparations of various animals. The positive inotropic mechanism of Aconiti tuber butanol fraction, in relation with the external calcium, was studied using the isolated cat papillary muscle. The positive inotropic effect was dependent on the calcium concentration in the nutrient medium, and a synergistic relation could be demonstrated between Aconiti tuber butanol fraction and the external calcium. The inotropic effect of $10^{-4}g/ml$ of Aconiti tuber butanol fraction was equivalent to that of 0.06mM of calcium in the medium. After the treatment with a calcium influx inhibitor, Verapamil$(2{\pm}10^{-7}-10^{-6}M)$, the contractile force of the papillary muscle was markedly inhibited. In these preparations, Aconiti tuber butanol fraction restored the decreased contractility in a dose-dependent manner. It was suggested that the positive inotropic effect of Aconiti tuber butanol fraction might be related with the stimulating action on the calcium influx through the slow inward calcium channels in the cardiac cell membrane. In contrast with digitalis cardiac glycoside, Aconiti tuber butanol fraction infused intravenously into the anesthetized rabbit decreased the systemic arterial blood pressure and increased the carotid blood flow, but produced no prominent changes in the heart rate.

• Applied Biological Chemistry
• /
• v.30 no.1
• /
• pp.65-70
• /
• 1987

In Girder to measure the pressure and weight decrease of drying sample during the vacuum drying process of food, sensing devices were designed and constructed with strain gauge. Microcomputer based vacuum drying system was made up of these devices interfaced to apple II microcomputer. The electrical output signal from vacuum sensor which constituted with Bourdon tube whereon strain gauge attached were digitalized and input to microcomputer through the MC 6821 interface I.C. chip. The relationship between read-out digital value (D) from microcomputer and readings of vacuum gauge (P, mmHg) was P=-146.136+3.620D'(r=0.9994) The pressure control of vacuum dryer was successfully conducted in the range of $400{\sim}600\;mmHg$ accuracy. The digitalized load cell output (D) could be correlated with the real weight (W, g) as W=-14,000+0.585D (r=0.9998) Drying curves of green red pepper under $64^{\circ}C$, $400{\sim}600\;mmHg$ was similar to those of red pepper and differently affected by the degree of vacuum pressure but was varied according to their shape (cut or whole). Moisture movement of green red pepper during the vacuum drying process was fitted to Page model. The empirical equations obtained were $M-M_e/M_o-M_e={\exp}\;(-0.0673{\theta}^{1.177})$ and $M-M_e/M_o-M_e={\exp}\;(-0.0655\;{\theta}^{1.477})$ for whole and cut green red pepper, respectively.

• Information and Communications Magazine
• /
• v.11 no.10
• /
• pp.120-138
• /
• 1994

최근에 정보 고속도로 사업계획과 관련하여 세계 여러나라들이 실시하거나 실시 예정인 VOD 시험서비스에 많은 관심이 일고 있다. VOD서비스와 같은 대화형 TV 서비스(I-TV, Interactive-TV Service)는 컴퓨터, 통신 가전업체 그리고 영화 제작사등이 함께 참여하고 있다. 본 기고에서는 차세대 통합 멀티미디어 사업이라는 대화형 TV서비스의 개요와 요소기술, 그리고 서비스의 동향 및 전망을 알아보기로 한다. 1. 대화형 TV 서비스(Interactive TV Service)의 개요 현재까지 대부분의 TV 시청자들은 방송국으로부터 송신되는 공중파나 CATV서비스를 통해 프로그램 서비스를 받아보는 방송(broadcasting)방식 형태의 서비스를 이용해 왔다. 그러나 이러한 일방적인 수신방식은 최근 미국의 클린턴 행정부가 미국의 차세대 기반 통신망 구축 정책(정보 고속도로 사업; Information Super High-way)의 일환으로, CATV 사업자뿐만 아니라 지역 전화회사까지도 참여하고 있는 VOD(Video On Demand) 시험서비스가 시행됨에 따라서 미국은 물론, 우리나라를 비롯한 여러나라에서 대화형식의 TV서비스를 시행하려는 움직임이 일어나고 있다. 이러한 움직임은 지난 ‘92년 7월 16일 미 연방통신위원회(FCC. Federal Communication Committee)가 그동안 전화회사에 대해 CATV 시업진출을 금지하였던 정책을 바꿔서, CATV에 대항한 경쟁도입과 기반 정보통신망 정비를 목표로 하여 비디오 다이얼톤(VDT(주), Video Dial Tone)이라는 이름하에 공중통신 사업자에게도 영상신호를 전송을 인가함에 따라 시작되었다. VOD서비스와 같은 대화형 TV서비스는 가입자가 원하는 서비스를 시간에 관계없이 댁내의 통신회선(일반전화망, 케이블망, 광화이버망, 위성망)을 통해서 요구 즉시 실시간에 서비스를 받아볼 수 있는 멀키미디어의 통합서비스 방식이다. 도한 이 서비스는 음성통신과 방송의 통합형 서비스로서, 방송국, 전화회사 혹은 서비스 제공업자(ISP ; Information Service Provider)에 의해 제공된 디지탈 영상 및 일반 데이터 등을 압축하여 서버에 저장한 후, 소비자의 요청이 있을 경우에 통신회선을 통해 즉시 서비스 해준다. 이와 같은 대화형 TV 서비스의 구성요소로는 다양한 영상정보 및 데이타를 보유하고 있는 정보제공자, 전화선이나 CATV 또는 위성방송과 연결해 주는 지역별 비디오 서버 및 교환장치, 통신회선을 통해 전송된 서비스를 영상정보로 만들어주고 또한 가입자의 요구를 즉시 정보제공자에게 알려줄 수 있는 가정용 단말기 (STB. Set Top Box)로 이루어진다. 여기서, 비디오 서버는 다양한 대화형 TV 서비스를 제공해 주는 중계자로서, 영화, 홈쇼핑, 홈뱅킹, 대화형 교육, 비디오 게임 등을 가정에서도 가능하게 해 줄 뿐 아니라, 가입자를 관리하는 기능을 가지고 있어서 가입자 정보는 물론, 각종 서비스 사용료, 개인 통계자료 분석 등도 집계할 수 있는 기능을 가지고 있다.(그림1) 본 기고에서는 이러한 대화형 TV서비스 중에 대표적 응용서비스인 VOD 서비스에 사용되는 기술요소와 각국에서 진행되고 있는 VOD 서비스 동향 및 전망에 대해 알아보고자 한다. (주) VDT(Video Dial Tone) : FCC가 ‘92년 7월 16일에 인가한 지역 전화회사에 의한 가정용 영상 전송서비스 및 CATV에 대항한 경쟁도입과 Infrastructure의 정비를 목표로 하여 결정한 내용은 다음과 같다. 지역 전화회사에 대하여 (1) 공중통신사업자에 대하여 서비스 제공자에 대한 영상신호의 전송을 인가(기본서비스), (2) Video Gateway 서비스, 비디오 기기 제공, 서비스 제공사업자에 대한 과금, 요금징수 대행을 인가(고도서비스), (3) 프로그램 제공자에 대하여 자본출자율을 5%로 높이는 외에 (종래는 1%) 업무 관계의 확대(합병회사 설립 및 consultant 계약 등)를 인가. (4) Rural 지역(영업지역의회의 지방)에 대한 직접 프로그램 제공의 특별인가(주민이 1만세데 미만의 지방 공공 단체만 가능, 영업지역내에서는 제한없음), (5) 지방공공 사업체에 의한 영업면허의 불요(지역 전화회사가 직접 사용자에 서비스를 제공하지 않기 때문에 CATV 서비스로는 보지 않기 때문). (6)의 회로의 권고(케이블 정책법으로 결정되어 있는 통신사업자와 CATV회사 자본의 상호보유 금지의 해제) 등이다.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2
• /
• pp.50-61
• /
• 1995

A time scale modification method yielding rate-modified speech while conserving the characteristic of speech was implemented in real-time using a goneral purpose digital signal processor. Time scale modification changed pronunciation speed only, producing a time difference between the input signal and the modified signal, making it impossible to implement it in real-time. In this thesis, a system was implemented to remove the time difference between the input and modified signals. Speech signals slowed down or speeded up by a physical time scale modification method, such as adjusting the motor speed of the cassett tape recorder, was used as the input signal. Physical modification that controled only the inter speed of the cassette tape player distorted the pitch period of the original speech. In this study, a real-time system was implemented so that the pitch-distorted speech was reconstructed back to the original by fractional sampling pitch shifting using an FIR filter, and this signal was time scale modified to match the cassette tape recorder motor speed using SOLA time-scale medification. In experiments using speech signals medifiedby the proposed method, results obtained using a 16-bit resolution ADSP2101 processor and using computer simulations employing floating point operations showed about the same average frame signal-to-noise ratio of about 20 dB.

• Journal of Animal Environmental Science
• /
• v.1 no.2
• /
• pp.125-136
• /
• 1995

To use the earth heat for the pig housing, an underground heat exchanger has constructed in depth of 2.5m and 20m length. The temperature of the outlet air was max. 8 kelvin higher than that of inlet air in winter season. In spite of the -7$^{\circ}C$ outside temperature, it could keep the air temperature from the earth tube above zero degree. The heating performance was maximum in value of 3.25Wh/㎥ and average of 1.75Wh/㎥ by the airflow volume of 340㎥/h. The slope of relative humidity from outlet air has shown gentler than that of inlet air. By using the underground heat exchanger, it would be possible to prepare an relatively uniform relative humidity in the swine stalls. The temperatures on the earth, where PVC pipes are buried, have shown 10~12$^{\circ}C$ on March. This can reduce the difference between day and night temperature during this season by using the underground heat exchanger.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.8-18
• /
• 2000

We presented a BGA(Ball Grid Array) package for RF circuit modules and extracted its electrical parameters. As the frequency of RF system devices increases, the effect of its electrical parasitics in the wireless communication system requires new structure of RF circuit modules because of its needs to be considered of electrical performance for minimization and module mobility. RF circuit modules with BGA packages can provide some advantages such as minimization, shorter circuit routing, and noise improvement by reducing electrical noise affected to analog and digital mixed circuits, etc. We constructed a BGA package of ITS(Intelligent Transportation System) RF module and measured electrical parameters with a TDR(Time Domain Reflectometry) equipment and compared its electrical parasitic parameters with PCB RF circuits. With a BGA substrate of 3${\times}$3 input and output terminals, we have found that self capacitance of BGA solder ball is 68.6fF, and self inductance 146pH, whose values were reduced to 34% and 47% of the value of QFP package structure. S11 parameter measurement with a HP4396B Network Analyzer showed the resonance frequency of 1.55GHz and the loss of 0.26dB. Routing length of the substrate was reduced to 39.8mm. Thus, we may improve electrical performance when we use BGA package structures in the design of RF circuit modules.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.1
• /
• pp.29-37
• /
• 2005

This paper proposes an automatic genre classification system for Korean traditional music. The Proposed system accepts and classifies queried input music as one of the six musical genres such as Royal Shrine Music, Classcal Chamber Music, Folk Song, Folk Music, Buddhist Music, Shamanist Music based on music contents. In general, content-based music genre classification consists of two stages - music feature vector extraction and Pattern classification. For feature extraction. the system extracts 58 dimensional feature vectors including spectral centroid, spectral rolloff and spectral flux based on STFT and also the coefficient domain features such as LPC, MFCC, and then these features are further optimized using SFS method. For Pattern or genre classification, k-NN, Gaussian, GMM and SVM algorithms are considered. In addition, the proposed system adopts MFC method to settle down the uncertainty problem of the system performance due to the different query Patterns (or portions). From the experimental results. we verify the successful genre classification performance over $97{\%}$ for both the k-NN and SVM classifier, however SVM classifier provides almost three times faster classification performance than the k-NN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.9
• /
• pp.1248-1256
• /
• 1993

The propagation and delay properties in opical fiber are particularly attractive because digital signal processing and conventional analog signal processing techniques such as those using surface acoustic wave devices are limited In their usefulness for signal bandwidth exceeding one or two GHz, although they are very effective at lower frequencies. Since an accurate, low loss and short time delay elements can be obtained by using such an optical fiber, optical signal precessing has attracted much attention for high speed and broad-band signal precessing in particular channel separation filtering for optical FDM signals. In this paper, we consider a coherent optical lattice filter, which uses coherent light sources and consists of directional couplers and optical fiber delay elemnts. The optical fiber fitters are more restricted than the usual digital filters. The reasons are as follows. 1) the coupling coefficients of directional couplers are restricted to the number between 0 and 1. 2) optical signal E(complex amplitude) is divided into J If-$\boxUl$ and J L/7$\div$$\boxUl$ at the directional coupler. Considering these restrictions and in this case all the coupling coefficients of summing and branching elements are set to be equal, we have given design formulae for optical lattice filter, which make the best use of optical signal energy.

• Journal of radiological science and technology
• /
• v.35 no.4
• /
• pp.309-314
• /
• 2012

Nowadays, digital Radiography (DR) systems are widely used in clinical sites and substitute the analog-film x-ray imaging systems. The resolution of DR images depends on several factors such as characteristic contrast and motion of the object, the focal spot size and the quality of x-ray beam, x-ray scattering, the performance of the DR detector (x-ray conversion efficiency, the intrinsic resolution). The DR detector is composed of an x-ray capturing element, a coupling element and a collecting element, which systematically affect the system resolution. Generally speaking, the resolution of a medical imaging system is the discrimination ability of anatomical structures. Modulation transfer function (MTF) is widely used for the quantification of the resolution performance for an imaging system. MTF is defined as the frequency response of the imaging system to the input of a point spread function and can be obtained by doing Fourier transform of a line spread function, which is extracted from a test image. In clinic, radiologic technologists, who are in charge of system maintenance and quality control, have to evaluate or make routine check on their imaging system. However, it is not an easy task for the radiologic technologists to measure MTF accurately due to lack of their engineering and mathematical backgrounds. The objective of this study is to develop and provide for radiologic technologists a medical system imaging evaluation tool, so that they can measure and quantify system performance easily.