• Journal of the korean Society of Automotive Engineers
• /
• v.18 no.6
• /
• pp.33-39
• /
• 1996

최근 서울의 일부 지역에서는 오존 주의보에 의한 대기 오염의 수치가 발표되고 있어 이의 심각성이 대두되고 있다. 대기오염의 주범은 자동차이며, 자동차에서 주로 많이 배출되는 질소산화물(NOx)과 탄화수소(HC) 및 디젤자동차에서의 입자상 물질(PM: Particulate Matter)등이 대기환경에 미치는 영향이 크므로 이러한 물질의 저감에 대한 요구가 점차 강화되어가고 있다. 특히, 디젤 엔진이 가솔린 엔진에 비해 대기오염의 주원인이라는 편견이 일반적으로 널리 알려져 있지만, 이는 눈에 보이는 Black smoke에 대한 거부반응이 있다는 점이다. 실제로 디젤 엔진의 유해 배출 성분 중에서 NOx는 가솔린과 비슷한 수준이나 HC와 CO성분은 상당히 적게 배출되고 있다. 또한, 디젤 엔진은 연료 경제성 및 지구 온난화의 원인인 CO$_{2}$ 배출이 적다는 장점이 있으므로 디젤 엔진에서 많이 배출되는 성분으로서 입자상 물질(PM) 및 NOx를 줄이는 방안이 요구되고 있다. 이를 저감시키는 방법은 여러가지가 있으나 분사계 측면에서 전자제어식 고압 연료 분사가 요구되고 있으며 이의 개발 필요성에 대해서 논하기로 한다.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.214-219
• /
• 2005

The effects of change in injection pressure on spray structure in high temperature and pressure field have been investigated. The analysis of liquid and vapor phases of injected fuel is important for emissions control of diesel engines. Therefore, this work examines the evaporating spray structure using a constant volume vessel. The injection pressure is selected as the experimental parameter, is changed from 72MPa to 112MPa by using a common rail injection system(ECD-U2). The images of liquid and vapor phase in the evaporating free diesel spray are simultaneously taken by exciplex fluorescence method. As a result, it can be confirmed that the distribution of vapor concentration is more uniform in the case of the high injection than in that of the low injection pressure.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2002.11a
• /
• pp.39-44
• /
• 2002

배기가스의 규제가 전 세계적으로 강화되고 있는 가운데, 경유사용 디젤기관은 가솔린기관 보다 열효율이 높고 온실가스인 $CO_2$ 배출량이 적은 장점이 있으나, PM(입자상 물질)과 NO$_{x}$가 다량 배출되는 단점이 있다. 이들의 저감책으로서, 엔진개량, 연료분사장치의 고압화와 전자제어화, 배기 후처리기술의 적용 등 디젤기관의 고효율성을 손상시키지 않으면서, 배기공해를 대폭 저감하려는 연구가 활발히 추진되고 있으며, 한편으로는 디젤기관의 대체연료에 대한 연구가 활발히 추진되고 있다.(중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.361-363
• /
• 2000

디젤 자동차는 가솔린 자동차에 비하여 연료소비효율이 높고, 경제성이 좋으며 고출력을 낼 수 있어 이에 대한 수요가 증가하고 있지만, 디젤엔진에서 배출되는 매연과 가스로 인한 오염도 심각한 수준에 달하였다. 엔진의 전자화, 고압분사기술등 여러 자동차 관련기술의 발달로 배출오염물질의 저감에 큰 발전을 이루어 왔으나, 계속적으로 강화되어지는 배출규제에 맞추기 위해서는 입자상 물질 후처리 장치의 개발이 가장 현실적인 대안으로 제기되고 있다. (중략)

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.196-204
• /
• 1996

The simplified dynamic models of the timer assembly in the diesel engine fuel injection system were developed. The first order system with time delay was assumed and the various parameters in this model were obtained by experimental data. These simplified dynamic models were used for the development of control algorithm of the injection timing control system. The PI control algorithm was modified to include the anti-windup property and disturbance compensation. This modified PI control algorithm was used for the control of the injection timing. Improved control accuracy and reduced control efforts were observed.

• The Science & Technology
• /
• v.29 no.6 s.325
• /
• pp.86-87
• /
• 1996

인하대의 채재우교수가 이끄는 연소공학연구실은 환경문제와 관련한 청정기술을 집중개발하는 연구실로 러시아 과학자 7명을 비롯해 총 28명의 연구원이 밤과 낮을 가리지 않고 연구에 열중하고 있다. 올해 열리는 한국산업기술대전에 개인연구팀으로는 이례적으로 디젤자동차, 봉고 등의 연료분사기를 임의로 조절해 매연을 막는 '전자분사장치'를 출품하기 위해 준비에 바쁘게 움직이고 있다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.2
• /
• pp.85-91
• /
• 1998

This paper describes an study electric injection system for diesel engines. It is needed effective fuel injection which controls the solenoid valve of fuel pump. To solve this, this paper proposes DCC-PWM method which can realize fast reply and low holding current for solenoid valve on/off. For the proposed design method, simulation tools of ACSL are used to analyze the system. And the single-chip microcomputer is used to reduce the size of controller and to improve flexibility. And the systems validity can be verified through the experimental results.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.209-213
• /
• 2005

The effects of density change of ambient gas on mixture formation process have been investigated in high temperature and pressure field. To analyze the mixture formation process of evaporating diesel spray is important for emissions reduction in actual engines. Ambient gas density was selected as experimental parameter. The ambient gas density was changed from $r_a=5.0kg/m^3\;to\;r_a=12.3kg/m^3$ with a high pressure injection system(ECD-U2). For visualization of the experiment phenomenon, a CVC(Constant Volume Chamber) was used in this study. The ambient temperature and injection pressure are kept as 700K and 72MPa, respectively. The images of liquid and vapor phase in the evaporating free spray were simultaneously taken by exciplex fluorescence method. As experimental results, with increasing ambient gas density, the tip penetration of the evaporating free spray decreases due to the increase in the drag force from ambient gas.

• Journal of Energy Engineering
• /
• v.16 no.3
• /
• pp.120-127
• /
• 2007

The purpose of this study is experimentally to analyze that the fuel mass fractions of multi-component mixed fuels have an effect on the characteristics of spray ignition and combustion under the ambient conditions of diesel combustion fields. The characteristics of ignition and combustion were investigated by chemiluminescence images and direct photography. The experiments were conducted in the RCEM(rapid compression expansion machine) with optical access. Multi-component fuels mixed with i-octane, n-dodecane and n-hexadecane are injected in RCEM by the electronic control of common rail injector. Experimental conditions set up 42, 72 and 112 MPa in injection pressure, 700, 800 and 900 K in ambient gas temperature. The results show that the ignition delay was dependent on high cetane number. In case of low ambient temperature, the more low boiling point fuels were mixed, the lower luminance regime had a remarkable effect and also shortened diffusion combustion by increasing heat release rate.

• Journal of ILASS-Korea
• /
• v.8 no.3
• /
• pp.33-40
• /
• 2003

The low-emission and high-performance diesel combustion is an important issue in the combustion research community, In order to understand the detailed diesel flame involving the complex physical processes, it is quite desirable to diesel spray dynamics, auto-ignition and spray flame propagation. Dynamics of fuel spray is a crucial element for air-fuel mixture formation, flame stabilization and pollutant formation, In the present study, the diesel RCM (Rapid Compression Machine) and the Electric Control injection system have been designed and developed to investigate the effects of injection pressure, injection timing, and intake air temperature on spray dynamics and diesel combustion processes, In terms of the macroscopic spray combustion characteristics, it is observed that the fuel jet atomization and the droplet breakup processes become much faster by increasing the injection pressure and the spray angle, With increasing the cylinder pressure, there is a tendency that the of spray pattern in the downstream region tends to be spherical due to the increase of air density and the corresponding drag force, Effects of intake temperature and injection pressure on auto-ignition is experimently analysed and discussed in detail.