• 제목/요약/키워드: 디젤입자상물질

검색결과 164건 처리시간 0.023초

자연재생방식 DPF시스템 부착 경유승용차량의 PM재생 특성 연구 (A Study on PM Regeneration Characteristics of Diesel Passenger Vehicle with Passive Regeneration DPF System)

  • 이진욱;조규백;김홍석;정용일
    • 대한기계학회논문집B
    • /
    • 제31권2호
    • /
    • pp.188-194
    • /
    • 2007
  • New diesel engines equipped with common-rail injection systems and advanced engine management control allow drastic decreases in the production of particulate matters and nitrogen oxides with a significant advantage in terms of the fuel consumption and $CO_2$ emissions. Nevertheless, the contribution of exhaust gas after treatment in the ultra low emission vehicles conception has become unavoidable today. Recently the passive type DPF(Diesel Particulate Filter Trap) system for diesel passenger vehicle has been manufactured into mass production from a French automotive maker since the year of 2000. This passive DPF system fully relies on the catalytic effects from additives blended into the diesel fuel and additives injected into the DPF system. In this study, the effects of PM regeneration in the commercial diesel passenger vehicle with the passive type DPF system were investigated in chassis dynamometer CVS(constant volume sampler)-75 mode. As shown in this experimental results, the DPF regeneration was observed at temperature as low as $350^{\circ}C$. And the engine-controlled the DPF regeneration founded to be one of the most promising regeneration technologies. Moreover, the durability of this DPF system was evaluated with a season weather in terms of the differential pressure and exhaust gas temperature traces from a road test during the total mileage of 80,000km.

저압 EGR을 적용한 디젤엔진의 희석비에 따른 연소 특성 비교 (Comparison of Combustion Characteristics On the Basis of the Dilution Ratio in Diesel Engines with LPL EGR)

  • 임기훈;박준혁;최영;이선엽;김영민
    • 대한기계학회논문집B
    • /
    • 제35권5호
    • /
    • pp.525-531
    • /
    • 2011
  • 디젤엔진에서 배기가스 재순환(EGR; Exhaust Gas Recirculation)은 선택적 환원 촉매나 $NO_x$ 흡장 촉 매에 비해 $NO_x$ 배출 저감을 위한 가장 효과적인 기술이다. 점점 더 강화되어 가는 $NO_x$ 배출 규제를 만족시키기 위해서는 많은 양의 EGR 가스 공급이 필요하다. 저압 EGR은 일정한 과급 압력에서 가변형상 터보차져의 제어와 거의 독립적이기 때문에 EGR 공급 측면에서 보면 저압 EGR이 기존의 고압 EGR에 비해서 더 많은 장점을 갖는다. 본 연구에서는 저압 EGR이 연소 특성에 미치는 영향을 고압 EGR을 적용했을 때와 비교하였다. 각 EGR 루프에 대해 혼합기의 희석 정도에 따른 영향을 분석하기 위해 독립변수로써 희석비를 사용하였다. 저압 EGR을 적용하였을 때, 고압 EGR을 적용했을 때와 동등한 $NO_x$ 배출량을 유지하면서 연료 소비율과 매연 배출은 고압 EGR의 경우보다 좀 더 낮은 결과를 보였다.

디젤 저온연소 운전 영역에서 흡기압이 엔진 성능에 주는 영향 (Effect of Intake Pressure on Emissions and Performance in Low Temperature Combustion Operation of a Diesel Engine)

  • 이선엽;장재훈;이용규;오승묵;김용래;김득상
    • 한국자동차공학회논문집
    • /
    • 제20권1호
    • /
    • pp.88-94
    • /
    • 2012
  • One of the effective ways to reduce both $NO_x$ and PM at the same time in a diesel CI engine is to operate the engine in low temperature combustion (LTC) regimes. In general, two strategies are used to realize the LTC operation-dilution controlled LTC and late injection LTC - and in this study, the former approach was used. In the dilution controlled regime, LTC is achieved by supplying a large amount of EGR to the cylinder. The significant EGR gas increases the heat capacity of in-cylinder charge mixture while decreasing oxygen concentration of the charge, activating low temperature oxidation reaction and lowering PM and $NO_x$ emissions. However, use of high EGR levels also deteriorates combustion efficiency and engine power output. Therefore, it is widely considered to use increased intake pressure as a way to resolve this issue. In this study, the effects of intake pressure variations on performance and emission characteristics of a single cylinder diesel engine operated in LTC regimes were examined. LTC operation was achieved in less than 8% $O_2$ concentration and thus a simultaneous reduction of both PM and $NO_x$ emission was confirmed. As intake pressure increased, combustion efficiency was improved so that THC and CO emissions were decreased. A shift of the peak Soot location was also observed to lower $O_2$ concentration while $NO_x$ levels were kept nearly zero. In addition, an elevation of intake pressure enhanced engine power output as well as indicated thermal efficiency in LTC regimes. All these results suggested that LTC operation range can be extended and emissions can be further reduced by adjusting intake pressure.

연료 물성 변화가 자동차 주요부품 및 배출가스에 미치는 영향 연구 (Study on effect of fuel property change on vehicle important parts and exhaust gas)

  • 이정천;김성우;이민호;김기호;박언영
    • 한국응용과학기술학회지
    • /
    • 제34권4호
    • /
    • pp.866-873
    • /
    • 2017
  • 산업이 발전함에 따라 전 세계적으로 환경오염에 대한 문제가 대두되고 있으며, 자동차 배출가스 규제도 점점 강화되고 있다. 하지만, 배출가스는 단순한 자동차만의 문제가 아닌 연료물성성분에 따른 영향도 받는 것으로 알려져 있으며, 특히, 디젤엔진의 경우 CRDI 엔진이 개발 및 상용화되면서 고성능 엔진은 고성능 연료를 필요로 하고, 그 중 대표적인 것이 연료의 윤활성으로 밝혀진바, 이에 본 연구에서는 연료물성변화가 자동차 주요부품 및 배출가스에 미치는 영향을 확인하고자 하였다. 윤활성이 취약한 연료($651{\mu}m$/품질기준 $400{\mu}m$이하)를 차량에 사용하여 고압펌프 및 인젝터, 매연저감장치 등의 파손이 발생하며, 매연 및 배출가스, 연비가 악화되는 것을 확인하였다. 또한, 파손된 매연저감장치(DPF)를 확인한 결과 철분성분이 다량 검출되었으며 이는 연료에 철분성분이 많이 함유되어 있어, 배출가스에 영향을 미쳐 매연저감장치(DPF)의 처리능력을 초과한 입자상물질의 배출로 인한 파손으로 추정 및 확인하였다.