• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2280-2288
• /
• 2014

The conventional dimming control methods of LED (Light-emitting dioades) include Analog, PWM (Pulse Width Modulation), and FM (Frequency Modulation) Control. Analog dimming is controlled by adjusting forward current of Power LED. Although Analog dimming is possible to control linearly the brightness levels on a whole range (0%~100%), it comes into existence a variation of wavelength by changing the Power LED's forward current. PWM dimming has achieved by varying in duty of full current flowing to the Power LED. Generally, PWM dimming doesn't make variation of wavelength but have difficulty with adjusting the linear brightness level between 0% and 10%. FM dimming method is on the same wavelength as PWM dimming, however, it has problem of flickering at low level of dimming. This paper propose a efficient dimming control method of Power LED in order to overcome the disadvantages of the above mentioned methods. We apply to Analog method in low level of dimming control and use PWM method in dimming range from 10% to 100%. For the experiment, we design and implement a circuit and test the proposed method. Consequently, we can control the linear brightness of Power LED across the whole range and get the constant wave at different dimming level. The experimental results show the benefits of the proposed method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.1
• /
• pp.111-116
• /
• 2015

In this study, the constant current converter for LED lighting was designed and the electrical characteristics of the fabricated SMPS was measured. When the output current is 300mA the maximum efficiency of 85% was shown and the output current is in the range of 100~400mA efficiency over 70% were exhibited. Also the dimming levels control over the range of 0 to 100% was possible by using a control signal of 0~250mV.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.243-249
• /
• 2018

In this paper, we analyzed the effect of modulation scheme and modulation scheme on the dimming level of visible light communication system and studied the effect of distortion due to delayed signal. Currently, the modulation schemes most commonly used in visible light communication result in increasing the communication performance but reducing the brightness of the entire illumination. Continuous Burst Zero Duration will severely degrade lighting. This degrades not only the illumination but also the performance of the whole system and causes Flicker phenomenon. In this paper, we analyze the relationship between modulation technique and illumination - communication performance and investigate the effect of signal delay on visible light communication system. Through simulation, we analyze the performance of IPI-OOK which has the best communication-lighting performance and propose future research directions accordingly.

• Journal of Industrial Convergence
• /
• v.21 no.2
• /
• pp.125-131
• /
• 2023

In this paper, research was conducted to solve the problem of reducing the dimming level and flicker that occurs in the visible light communication system. Visible light communication is a convergence technology that provides both communication and lighting, and must satisfy not only communication performance but also lighting performance. However, since the existing data transmission method transmits without considering the transmission data sequence, it reduces the dimming level and causes a flicker phenomenon. To solve this problem, in this paper, the Dimming Improvement and Flicker Reduction Mapping technique was studied. Existing systems simply transmitted data of '0' and '1', but in this system, original data transmission channels and DIFR (Dimming Improvement and Flicker Reduction) transmission channels are assigned to RGB channels. Original data is allocated to the R channel and original data or inverse original data is allocated to the DIFR-G channel, and the DIFR-B channel maintains the maximum dimming level by transmitting through the logical operation of the R channel and the G channel. At the same time, the flicker phenomenon is prevented by preventing continuous occurrence of 'OFF' patterns. Through this, we proposed an adaptive data allocation algorithm that can faithfully play a role as a light as well as a communication function.

• Journal of Convergence for Information Technology
• /
• v.8 no.5
• /
• pp.153-158
• /
• 2018

In this paper, we have studied a dimming level control method to satisfy both lighting and communication performance in visible light communication system. In the case of the most commonly used OOK and RZ-OOK modulation schemes, continuous Burst Zero Duration will seriously degrade the lighting function. This causes not only the illumination but also the performance of the entire system to deteriorate. Through this study, we analyzed the dimming level characteristics of the existing system and proposed the Illegal Pulse Insertion (IPI) algorithm as a technique to increase the dimming level. Through this, it is possible to effectively control the dimming level and improve the QoS of both lighting and communication by resolving the flicker phenomenon and dimming level reduction in the existing modulation and demodulation system.

• Journal of Convergence for Information Technology
• /
• v.12 no.2
• /
• pp.30-36
• /
• 2022

In this paper, when the lighting and communication functions of the visible light communication system are used at the same time, we propose a technique to reduce the dimming level and flicker of the lighting. Visible light communication must satisfy both communication and lighting performance. However, the existing data code method results in reducing the brightness of the entire lighting. This causes deterioration of lighting performance and flicker phenomenon. To solve this problem, in this paper, we propose an adaptive learning code allocation technique that allocates binary codes to transmitted characters and optimizes and matches the binary codes allocated according to the frequency of occurrence of alphabets in character strings. Through this, we studied a technique that can faithfully play the role of lighting as well as communication function by allocating codes so that the 'OFF' pattern does not occur continuously while maintaining the maximum dimming level of each character string. As a result of the performance evaluation, the frequency of occurrence of '1' increased significantly without significantly affecting the overall communication performance, and on the contrary, the frequency of consecutive '0' decreased, indicating that the lighting performance of the system was greatly improved.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.2
• /
• pp.151-155
• /
• 2016

In this paper, we present the LED dimming control system by using ADPCM (Adaptive Differential Pulse Code Modulation). This ADPCM apparatus accurately controls the LED current with high resolution reducing the RFI (radio frequency interference) due to the spreading out of the harmonics of current of pulses. Additionally, this makes it easier to increase the accuracy of control operation. This study introduces to make a digitally controlled circuit for controlling LED with high-energy efficient by adopting pulse current to LED. The LED current drive system we designed are two systems, the digitally-controlled unit and analog switching mode power supply unit, can be developed separately. The simulation shows the sigma delta modulation of digital to analog converter's output when the input level is 0.7. From this simulation, the output is approached to accurately 0.15% to target value with 510 pulses.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.55-57
• /
• 2022

In this study, a customized semi-passive RFID receiver module was implemented for in-VIVO deep tissue photo-therapy. A novel wireless technique is required due to a limitation of RF communication in body environment, as internal body has a complex structure such as, skin, fat, skeleton, water, and so on. Recently, coherently incoherent beamforming (CIB) based on RFID was introduced and it is able to transmit wireless signal with high reliability under the incoherent condition such as in-VIVO deep tissue. The proposed miniature photo capsule based on RFID consists of miniature controller, ultra small LED array and wireless RFID chip. RF Reader can access with standard RFID protocol (ISO 18000-6c) using UHF RFID antenna, a control command is wirelessly writtern on USER Bank memory. With received control command, therapy LED array dims with mulilevel under timer control. The signal process of designed RFID photo therapy capsule is analyzed and evaluated under the various environments in detailed.