• Journal of Wetlands Research
• /
• v.21 no.spc
• /
• pp.16-27
• /
• 2019

Alteration in the flow regime of rivers are caused by natural climate change and the changes in anthropogenic hydrological environment due to dam construction. These changes in flow regime cause serious changes not only in the fresh water ecosystems of the rivers but also in the physical structures and fish habitats of the streams. In this study, the alteration in the hydrological characteristics of the Gam river basin due to Buhang dam construction and the changes in ecological health condition, water quality, and river cross-section were analyzed. As a result of analysis by indicators of hydrologic alteration (IHA) to quantitatively change the flow regime of Gam river, HA (Hydrologic Alteration) is more than ±1 and various changes have occurred in the river ecosystem after Buhang dam construction. In addition, ecological health condition and water quality showed different response for each element, and in the case of riverbeds and channel cross-sections, the degradation of channel bed was obviously monitored after dam construction. The results of this study are expected to be used as an efficient method for evaluating changes in stream ecosystems caused by stream regime changes.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.10
• /
• pp.581-590
• /
• 2017

For effective improvement of water quality in Seokmun reservoir, this study implemented various analyses including the tributary water quality and flowrate monitoring, contamination of sediment, investigation of pollution source, selection of priority management target tributary by stream grouping method. The COD concentration of the majority of tributaries in Seokmun reservoir watershed was relatively higher than BOD concentration. The concentration of water pollutants regardless of water quality parameters in Yeokcheon, Dangjincheon, Sigokcheon, Baekseokcheon, small stream in Jinkwanri and Janghangri were higher than the other tributaries. The pollution sources in the Seokmun reservoir watershed were mostly distributed in the population, livestock, and industry. The pollutants, which located in Yeokcheon, Dangjincheon, Baekseokcheon, and small stream in Janghangri selected as priority management target tributary, should be preferentially reduced for improving the water quality in Seokmun reservoir. As the evaluation results of water quality in Seokmun reservoir for the effect of water quality improvement according to various scenarios using water quality model, it was found that the water quality in Seokmun reservoir due to the construction of a wastewater treatment plant for management of pollutants in the watershed would be satisfied the class V of water environment standard in reservoir.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.532-538
• /
• 2006

The carbonization and activation conditions for the PAN-based ACF of various grade were investigated to obtain the optimun activation condition with high surface area. And the surface properties and the absorption performance of toxic gas for terror were examined toward the PAN-ACF with the highest surface area. In the test results the surface area increased with increase of the activation temperature, but decreased with increase of the carbonization temperature. After carbonization condition ($900^{\circ}C$-15min) and activation condition ($900^{\circ}C$-30 min), we got the ACF with the highest surface area of $1204m^2/g$. In the absorption test of iodine and toxic gas for terror, this ACF showed more excellent absorption performance than the existing carbon-based adsorbent. Also, in order to give the function characteristic for a selective absorption, the stable nanoparticles of the Ag, Pt, Cu, Pd were prepared and impregnated on the PAN-based ACF in replacement of the existing method supporting metal catalysis. And were analyzed the surface characteristics and the $SO_{2}$ adsorption characteristics. In the $SO_{2}$ absorption performance test of the PAN-ACF with the impregnated nanoparticles, it wasn't change breakthrough time of Ag, Pt, Cu nanoparticle supported the PAN-ACF comparing with breakthrough time (326 sec) of the non supported PAN-ACF but Pd nanoparticle supported the PAN-ACF achieved excellent $SO_{2}$ absorption performance which has break-through time 925 sec.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2006.05a
• /
• pp.178-193
• /
• 2006

기업들이 고객에 대해 관심을 가지는 이유는 고객관계관리(CRM: customer relationship management)의 중요성이 그 어느 때 보다도 강조되고 있기 때문이며, 또한 강력한 고객관계가 기업의 경쟁우위를 위한 주요 수단이 되고 있음을 지각하고 있기 때문이다. 특히 인터넷 쇼핑몰에 대한 고객의 충성행위는 인터넷 쇼핑몰이 제공하는 다양한 상품 및 서비스와 더불어 성공적인 고객관계를 위해서는 매우 중요하다. 또한 인터넷 쇼핑몰의 입장에서는 여러 가지 다양한 서비스를 인터넷 쇼핑몰 이용 고객에게 제공함으로써 인터넷 쇼핑몰을 이용하는 고객들에 대한 신뢰와 몰입을 증가시킴으로써 인터넷 쇼핑몰 이용 고객들로 하여금 인터넷 쇼핑몰에 대해 높은 충성도를 가지게 할 수 있을 것이다. 따라서 본 연구는 인터넷 쇼핑몰 이용 고객에 대한 고객충성행위를 신뢰형성요인, 몰입형성요인, 신뢰, 몰입이라는 측면에서 설명하고자 하였다. 즉, 인터넷 쇼핑몰의 신뢰형성요인(능력, 호의성, 무결성)이 신뢰에 영향을 미치고, 몰입형성요인(촉진정보, 상호작용성, 쇼핑몰디자인)이 몰입에 영향을 미친다. 그리고 신뢰는 몰입과 고객충성행위에, 몰입은 고객충성행위에 영향을 미칠 수 있음을 제안하고 이를 인터넷 쇼핑몰 이용 경험이 있는 고객들을 대상으로 실증적으로 분석하였다. 실증분석 결과에 따르면 제안모델은 수용가능한 모델적합도를 보여 주었으며, 또한 본 연구에서 제시한 9개의 가설 모두가 통계적으로 유의한 결과를 보여주었다. 특히 신뢰는 신뢰형성요인(능력, 호의성, 무결성)과 고객충성행위사이에 매개변수의 역할을 수행하고있으며, 몰입은 몰입형성요인(촉진정보, 상호작용성, 쇼핑몰디자인)과 고객충성행위사이 그리고 신뢰와 고객충성행위사이에 매개변수의 역할을 수행하는 것으로 나타났다.동지역의 고기후를 해석함으로써 고기후적 및 고생태학적 의미를 연구해 보고자 하였다.에서는 시스템 등급에 영향을 준다. 향후에는 더욱 더 다양한 상호의존 모델들이 정량화될 필요성이 있다고 본다. 진행하였다. 줄여서 보다 더 정확하고, 지능적인 규칙구성요소 추출 방법론을 제시하고 구현하여 지식관리자의 규칙습득에 대한 부담을 줄여 주고자 한다. 도움을 받을 수 있게 되었다.을 거치도록 되어있다. 교통주제도는 국가의 교통정책결정과 관련분야의 기초자료로서 다양하게 활용되고 있으며, 특히 ITS 노드/링크 기본지도로 활용되는 등 교통 분야의 중요한 지리정보로서 구축되고 있다..20{\pm}0.37L$, 72시간에 $1.33{\pm}0.33L$로 유의한 차이를 보였으므로(F=6.153, P=0.004), 술 후 폐환기능 회복에 효과가 있다. 4) 실험군과 대조군의 수술 후 노력성 폐활량은 수술 후 72시간에서 실험군이 $1.90{\pm}0.61L$, 대조군이 $1.51{\pm}0.38L$로 유의한 차이를 보였다(t=2.620, P=0.013). 5) 실험군과 대조군의 수술 후 일초 노력성 호기량은 수술 후 24시간에서 $1.33{\pm}0.56L,\;1.00{\ge}0.28L$로 유의한 차이를 보였고(t=2.530, P=0.017), 술 후 72시간에서 $1.72{\pm}0.65L,\;1.33{\pm}0.3L$로 유의한 차이를 보였다(t=2.540, P=0.016). 6) 대상자의 술 후 폐환기능에 영향을 미치는 요인은 성별로 나타났다. 이에 따른 폐환기능의 차이를 보면, 실험군의 술 후 노력성 폐활량이 48시간에 남자($1.78{\pm}0.61L$

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.457-463
• /
• 2002

이 연구는 x-선 투과영상을 이용하여 홍삼의 내공을 검출하기 위하여 수행되었다. 이를 위하여 x-선관에 조사되는 x-ray 양의 차이에 따른 위치별 밝기 값 차이를 보정하고 내공 검출에 적합한 영상처리 알고리즘을 개발하였다. 주요연구 결과를 요약하면 다음과 같다. 1) x-선관에 조사되는 x-ray양은 중심에서 가장자리로 갈수록 감소하며, 이것은 위치에 따른 gray 값의 분포가 달라지게 되는 원인이 되었다. 2) 홍삼을 2치화 하기 위해서는 동일한 x-선 조사강도에서 입력된 원 영상에서 빈 영상을 뺀 감산 영상을 만들어 줌으로써 가능하였다. 3) 조사강도 별 감산영상처리 결과 36kV/4.15mA와 39kV/4.15mA에서는 조사량이 많아서 홈삼 지근 부분의 영상이 손실되는 경우가 발생하였다. 4) 내공 검출을 위해서는 정상부분과 내공부분의 자기 값 차이를 크게 하는 전처리 영상을 만들 필요가 있었고, multiple 감산영상에서 뚜렷한 골짜기가 나타났으나 주근의 내공부분의 밝기값 보다 지근의 정상부분의 자기 값이 더 낮게 나타나 이를 보정하기 위하여 홍삼 위치에 따라 부분 보정된 알고리즘을 개발하였다. 5) x-선관의 놓인 위치에 따라서 내공판정시험 결과 중심에 있을 때에 비해 가장자리에 있을 때는 영상이 일부 손실되었으며, 중심 위치에서 서로 다른 굵기의 홍삼에 대해서는 모두 양호한 결과가 나타났다. 6) 완전한 홈삼으로 내공판정시험 결과 내공주위의 정상부분가지도 일부 내공으로 잘못 검출되었으나 이것을 재차 line profile에 의해 한 라인씩 문턱 값을 설정하여 내공만을 정확하게 판정하는 알고리즘을 개발하였다.양체의 접종작업은 모든 배양실이 인력에 의존하였으며, 배양체를 배지와 분리하여 불필요한 부분을 제거하고 배양작물에 따라 생육정도를 2~3등급으로 구분하여 배양용기의 배지 위에 치상하는 과정으로 수행되었으며, 작업능률은 호접란의 경우 배양병에 25본을 접종하는데 시간당 6병, 심비디움은 원형 플라스크에 25본을 접종하는데 시간당 10병 정도였다. 바. 식물체의 대량증식에 사용되는 플라스크, 배양병, PE용기 등 배양용기의 세척작업은 농원의 1개배양실에서 간이식 세척기, 이 외의 9개배양실은 모두 물에 담겨 두었다가 세제와 브러쉬 등을 사용하여 인력으로 세척하고 있어 생력화 기술개발이 요구되었다.도가 빠를수록 건조속도가 빨라졌으며, 건조에너지도 1,334kcal/kg.water로 비슷하게 소요되었다. 마. 시험구와 대비구의 건감률은 시험구에서 1.08~1.36w.b./h로 나타나 대비구보다 약 9.9~18.3%가 높게 나타났고, 건조에너지는 10.2~14.6%가 절감되었다. 발아율은 열풍온도가 낮을수록 높게 나타났고 시험구가 대비구보다 발아율이 낮게 나타났으며, 동할률 증가량도 원적외선.열풍 복합건조방법이 높게 나타나 이것은 곡물 표면에 원적외선 방사에의한 복사열이 전달되어 열장해를 받았기 때문으로 판단되며, 금후 더 연구하여 적정 열풍온도 및 방사체 크기를 구명해야 할 것이다.으로 보여진다 따라서 옻나무 유래 F는 포유동물의 생식기능에 중요하게 작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.2
• /
• pp.229-238
• /
• 2019

Various wood defects occur during tree growing or wood processing. Thus, to use wood practically, it is necessary to objectively assess their quality based on the usage requirement by accurately classifying their defects. However, manual visual grading and species classification may result in differences due to subjective decisions; therefore, computer-vision-based image analysis is required for the objective evaluation of wood quality and the speeding up of wood production. In this study, the SIFT+k-NN and CNN models were used to implement a model that automatically classifies knots and analyze its accuracy. Toward this end, a total of 1,172 knot images in various shapes from five domestic conifers were used for learning and validation. For the SIFT+k-NN model, SIFT technology was used to extract properties from the knot images and k-NN was used for the classification, resulting in the classification with an accuracy of up to 60.53% when k-index was 17. The CNN model comprised 8 convolution layers and 3 hidden layers, and its maximum accuracy was 88.09% after 1205 epoch, which was higher than that of the SIFT+k-NN model. Moreover, if there is a large difference in the number of images by knot types, the SIFT+k-NN tended to show a learning biased toward the knot type with a higher number of images, whereas the CNN model did not show a drastic bias regardless of the difference in the number of images. Therefore, the CNN model showed better performance in knot classification. It is determined that the wood knot classification by the CNN model will show a sufficient accuracy in its practical applicability.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3B
• /
• pp.283-296
• /
• 2008

The Urban Stream Assessment Technique (USAT) was suggested to give information about present urban stream condition. Domestic and foreign stream evaluation methods were analyzed and some streams were previously investigated to decide evaluation factors that could evaluate stream condition and have concern with characteristics and flood control of urban stream. The USAT consisted of three steps. High step has three characteristics concerned with functions of stream such as flood risk, stream, and ecology. In middle step, three characteristics were subdivided by ten features to describe changes and degradations of urban stream. Low step consisted of fifty three factors that explain the present condition of ten features. A survey of river experts was conducted to reflect weight among characteristics and features. The weights were calculated by analytic hierarchy process(AHP). The USAT was carried out to check over application of that in Suwon, Anyang, and Joongrang stream. The results of stream evaluation were expressed by factor index, feature index, characteristic index, total index, and evaluation grade. The results of the USAT were useful to realize changed and degraded areas. It is expected that the USAT can be used as base investigation for restoring and managing urban streams.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.1
• /
• pp.97-108
• /
• 2024

This research delves into the escalating concerns of accidents and fatalities in the construction industry over the recent five-year period, focusing on the development of a Safety Perception Model to augment safety measures. Given the rising percentage of elderly workers and the concurrent drop in productivity within the sector, there is a pronounced need for leveraging Fourth Industrial Revolution technologies to bolster safety protocols. The study comprises an in-depth analysis of statistical data regarding construction-related fatalities, aiming to shed light on prevailing safety challenges. Central to this investigation is the formulation of a Safety Perception Model tailored for small-scale construction projects. This model facilitates the quantification of safety risks by evaluating safety grades across construction sites. Utilizing the DWM1000 module, among an array of wireless communication technologies, the model enables the real-time tracking of worker locations and the assessment of safety levels on-site. Furthermore, the deployment of a safety management system allows for the evaluation of risk levels associated with individual workers. Aggregating these data points, the Safety Climate Index(SCLI) is calculated to depict the daily, weekly, and monthly safety climate of the site, thereby offering insights into the effectiveness of implemented safety measures and identifying areas for continuous improvement. This study is anticipated to significantly contribute to the systematic enhancement of safety and the prevention of accidents on construction sites, fostering an environment of improved productivity and strengthened safety culture through the application of the Safety Perception Model.

• Journal of Intellectual Disabilities
• /
• v.20 no.2
• /
• pp.67-90
• /
• 2018

This study aims to provide base data and suggestions to develop a system which considers both improvement of personal competency and national and societal dimensions for employment of people with developmental disabilities. The raw data of '1st Panel Survey of Employment for the Disabled from 2nd wave' was analyzed by cross analysis and logistic regression in order to examine factors which have potential to affect employment of people with developmental disabilities. The results are as follows: 'Gender', 'Level of education', health status', 'communication skills', 'possess a license or certification', 'actual skills and qualification of area of expertise', 'family support level for employment', 'satisfaction level of daily life', 'job hunting through public agency' and 'job hunting through acquaintance' showed positive effect on employment of developmental disabilities population. On the other hand, 'need level of assistance in daily life' and 'national basic livelihood security' showed negative effect on employment of developmental disabilities population. The improvement of personal competency should be focus on the lacking skills such as communication skills and health. In addition, educational and occupational support need to be diversified. A need of solution for low-income issue and modification of national basic livelihood security policy was suggested to increase motivation to do job-hunting and maintenance of employment.

• Korean Journal of Poultry Science
• /
• v.16 no.2
• /
• pp.105-127
• /
• 1989

Although poultry industry in Japan has been much developed in recent years, it still needs to be developed , compared with developed countries. Since the poultry market in Korea is expected to be opened in the near future it is necessary to maximize the Productivity to reduce the production costs and to develop the scientific, technologies and management organization systems for the improvement of the quality in poultry production. Followings ale the summary of poultry industry in Japan. 1. Poultry industry in Japan is almost specized and commercialized and its management system is ： integrated, cooperative and developed to industrialized intensive style. Therefore, they have competitive power in the international poultry markets. 2. Average egg weight is 48-50g per day (Max. 54g) and feed requirement is 2. 1-2. 3. 3. The management organization system is specialized and farmers in small scale form complex and farmers in large scale are integrated.