• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.443-446
• /
• 2016

차량의 증가에 따라 다양한 교통문제들이 발생하고 있다. 이러한 문제를 해결하고자 IT기술과 융합된 지능형 교통시스템(ITS)의 연구가 진행되고 있다. 하지만 기존 ITS기술들은 국가별로 도로의 특성이 다양하기 때문에 쉽게 적용하기 어렵다. 그러므로 기존ITS기술들을 실험 및 테스트하기 위한 시뮬레이션 환경이 필요하다. 본 논문에서는 ITS기술들을 한국도로에 적용 할 수 있도록 하는 교정방법을 제안한다. 실험 도로는 항상 정체 현상이 발생하는 서울외곽순환고속도로를 선택하였고 실험 환경은 PTV사의 VISSIM 시뮬레이터를 이용하였다. 실험 결과 실제 속도 등고선 그래프와 시뮬레이션 환경에서의 속도 등고선 그래프의 병목현상이 발생하는 구간이 동일한 것을 확인 하였다. 또한 스테이션별 통행량 그래프를 비교하여 실제 교통량과 유사함을 확인하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_2
• /
• pp.645-651
• /
• 2007

In general, contours in digital vector maps, which represent terrain characteristics and shape, are created by 3D digitizing the same height points using aerial photographs on the analytical or digital plotters with stereoscopic viewing. Hence, it requires lots of task, and subjective decision and experience of the operators. DTMs are generated indirectly by using contours since the national digital maps do not include digital terrain model (DTM) data. In this study, model key points which depict the important information about terrain characteristics were extracted from the contours. Further, determination of the efficient and flexible grid sizes were proposed to generate optimal DTM in terms of both quantitative and qualitative aspects. For this purpose, a progressive sampling technique was implemented, i.e., the smaller grid sizes are assigned for the mountainous areas where have large relief while the larger grid sizes are assigned for the relatively flat areas. In consequence, DTMs with multi-grid for difference areas could be generated instead of DTMs with a fixed grid size. The multi-grid DTMs reduce computations for data processing and provide fast display.

• Spatial Information Research
• /
• v.7 no.1
• /
• pp.1-12
• /
• 1999

The DTM(Digital Terrain Model) in GIS(Geographical Information System) shows the elevation from interpolation using data points surveyed. In panoramic flat landform, pixel size, resolution of source data may not be the problem in using DTM However, in mountainous landform like Korea, appropriate resolution accuracy of source data are important factors to represent the topography concerned. In this study, the difference in contour interval of source data, the resolution after interpolation, and different data structures were compared to figure out the accuracy of slope calculation using DTM from the topographic maps of Togyusan National Park Two types of GIS softwares, Idrisi(grid) ver. 2.0 using the altitude matrices and ArcView(TIN) ver. 3.0a using TIN were used for this purpose. After the analysis the conclusions are as follows: 1) The coarser resolution, the more smoothing effect inrepresenting the topography. 2) The coarser resolution the more difference between the grid-based Idrisi and the TIN-based ArcView. 3) Based on the comparison analysis of error for 30 points from clustering, there is not much difference among 10, 20, 30 m resolution in TIM-based Airview ranging from 4.9 to 6.2n However, the coarser resolution the more error for elevation and slope in the grid-based Idrisi. ranging from 6.3 to 10.9m. 4) Both Idrisi and ArcView could net consider breaklines of lanform like hilltops, valley bottoms.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.2 s.40
• /
• pp.59-66
• /
• 2007

The digital working environment and its related technology have been rapidly expanding. In the surveying field, we have changed from using optical film cameras and plotters to digital cameras, multi sensors like GPS/INS etc,. The old analog work flow is replaced by a new digital work flow. Accurate data of the land is used in various fields, efficient utilization and management of land, urban planning, disaster and environment management. It is important because it is an essential infrastructure. For this study, LiDAR surveying was used to get points clouds in the study area. It has a high vegetation penetrating advantage and we used a digital process from planning to the final products. Contour lines were made from LiDAR data and compared with national digital base maps (scale 1/1,000 and 1/5,000). As a result, the accuracy and the economical efficiency were evaluated. The accuracy of LiDAR contour data was average $0.089m{\pm}0.062\;m$ and showed high ground detail in complex areas. Compared with 1/1,000 scale contour line production when surveying an area over $100\;km^2$, approximately 48% of the cost was reduced. Therefore we prepose LiDAR surveying as an alternative to modify and update national base maps.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.4
• /
• pp.469-476
• /
• 2009

The new laser scanning technology allows to attain 3D information faster with higher accuracy on surface ground, vegetation and buildings of the earth surface. This acquired information can be used in many areas after modifying them appropriately by users. The contour production for accurate landform is an advanced technology that can reveal the mountain area landscapes hidden by the trees in detail. However, if extremely precise LiDAR data is used in constructing the contour, massive-sized data intricates the contour diagram and could amplify the data size inefficiently. This study illustrates the algorithm producing contour that is filtered in stages for more efficient utilization using the LiDAR contour produced by the detailed landscape data. This filtering stages allow to preserve the original landscape shape and to keep the data size small. Point Filtering determines the produced contour diagram shape and could minimize data size. Thus, in this study we compared experimentally filtered contour with the current digital map(1:5,000).

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.128-133
• /
• 2001

For the Z-level machining, a tool-path linking procedure is presented. The linking problem is approached from the technological requirements, such as considering the machining constraints among the tool-path-elements, minimizing the tool-path length and reflecting the oneway/zigzag linking option. To simplify the linking problem, we develop a data structure, called a TPE-net, providing information on the machining constraints among the tool-path-elements. By making use of the TPE-net, the tool-path linking problem becomes a touring problem so that every node has been traversed.

• Proceedings of the KGS Conference
• /
• 2003.05a
• /
• pp.211-214
• /
• 2003

지도는 기호, 주기, 색상, 경위선, 축척 등과 같은 여러 요소들을 사용하여 지도 사용자들에게 다양한 지리적 사상들(geographic features)의 존재와 그들의 상관관계를 전달하는 일종의 의사소통 수단이다(황철수, 2002). 주기(label)는 $\ulcorner$지역, 인공물, 자연물의 고유명칭 및 고유명이 없는 것의 종류 또는 상태 등을 표시하는 설명 및 표고와 등고선수치 등을 문자 또는 숫자로서 표기하는 것1)$\lrcorner$, 즉 지도에 나타나는 사상들에 대해 설명하기 위해 입력되는 문자열을 의미하는 것으로 지도의 여러 가지 요소들 중에서도 가장 직접적이고 구체적으로 사상을 표현할 수 있는 요소이다. (중략)

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1169-1174
• /
• 1991

In conventional geographic mapping system, it is needed to input many already existing geographic map into computer system for secure and efficient maintence. Because of large map data, it is required to construct layers from map image for easy display, fast retreval and efficient storage. Thus this paper represents a method of the extracting features from contour map and constructing three layers. The layers are symbol, building, contour line. Experimental results are presented confirming the method's high extraction.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.2 no.1
• /
• pp.1-9
• /
• 1978

냉각용 Fin의 설계문제를 일반적인 최적설계문제로 바꾸어서 일반화된 Steepest Descent 방법에 의한 수치적 방법을 도입하여 해결하였다. 보다 실제적인 문제를 다룰 수 있도록 여러가지 제한조건을 고려한 Fin의 최적곡선 모양의 해를 얻었으며 이 방법의 유용성을 보였다. 사다리꼴의 Fin 설계예에서 위 방법을 이용한 해와 직접 계산에 의한 열전달량의 등고선 그림으로부터 구한 해와 일치함을 보였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.609-611
• /
• 1998

본 논문에서는 수치고도모델로부터 정확한 등고선을 추출하는 방법을 연구하였다. 이것은 하나의 높이 평면과 DEM 데이터의 교점 테스트를 통하여 등고선을 찾는 방법이다. 정해진 높이 평면과 교차하는 지형의 모든 점을 찾아내므로 등고선을 정확히 찾아낸다는 장점이 있다. 본 논문의 결과를 비교 분석함으로서 연구의 정확성을 도모하였다.