• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.2
• /
• pp.143-150
• /
• 1984

This paper is a study on effectiveness of weight in analytical positioning of oblique photography. Oblique photographies are more economical than normal photographies as it has a larger ground coverage and as it can be applied in situations where objects of interest are difficult to be approached. But the comparatively complex methods involved, present a problem in obtaining the desired results. In view of this fact, analytical rectification was applied in normalizing the oblique photographs. As oblique photographies are extensively used in slops and mountainous regions, a number of difficulties are encountered during the control surveying. The photocoordinates of the oblique photographs, taken at $30^{\circ}$, were weighted during rectification. They were weighted as inversely proportionate to the derived formular of ${\gamma}_y=f{\cdot}tan{\frac{\theta}{2}}+y_a$, the distance of each point from the isocenter along the Y axis. By applying the weights, coordinates errors conld be reduced and the error difference between oblique and normal photographs could be reduced upto 53.2%.

• Korean Journal of Optics and Photonics
• /
• v.13 no.6
• /
• pp.473-478
• /
• 2002

Circular slab waveguides are conformally mapped into straight waveguides. In the outer cladding region with monotonically increasing index profile, modified Airy functions (MAF) of traveling-wave form are introduced to express the leaky mode. Field distributions and losses calculated by the proposed method are compared with those obtained by the WKB (Wentzel-Kramers-Brillouin) method. Detailed numerical examples are presented and compared with the conventional WKB methods, demonstrating our method not only allows a converging field at turning points but also guarantees fine accuracy.

• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.677-684
• /
• 2020

Miscentering in the left and right X axis direction during CT examination affects dose and quality. When the CT Gantry Isocenter and the center of the examination objective are matched using the Lateral Sliding Table, the image quality is improved and the exposure dose is reduced. CTDI Head Phantom (Kimda, Korea) and dosimeter (Ray Safe, Sweden) were used to measure dose comparison CTDI (mGy) due to center deviation, and Water Phantom (HITACHI, Japan) was used to measure noise to see the difference in uniformity due to center deviation. Measurements of doses for dose comparison CTDI (mGy) with a deviation showed that doses were consistently reduced and exact dose was not projected until they were moved to 80 mm by 20 mm from the Isocenter. SD values were measured to see the difference in uniformity due to center deviation and the noise continued to increase until it was moved by 20 mm to 80 mm. The range of collimation has increased by the extent of deviating from the center and the range of exposure has increased. Using the Lateral Sliding Table, you can easily adjust the Isocenter, increase the quality of the image by adjusting the Isocenter in areaa such as the cardiac examination of the location away from the Isocenter, Extreme bone and Shoulder, and greatly reduce the collimation to the Isocenter, so it can be used to reduce unnecessary exposure dose.

• Spatial Information Research
• /
• v.11 no.4
• /
• pp.481-491
• /
• 2003

This study aims at generating a continuous map by coordinates transformation between cadastral maps with different surveying origins. The continuous cadastral map is useful in various fields of GIS. For this purpose, an experimental study was conducted at Osan-Si, Kyonggi Province in cooperation with related institutions. In this study, three control point zone, large, medium, and small zone were to!;ted. For each control point, the currently used data were compared with the data at the surveyed time. About coordinate transformation method, we tested Helmert, Affine, and Polynomial methods which are the most representative among 2-dimensional coordinate transformations. These three transformation methods were evaluated according to variation of transformed parcel shape and agreement with neighboring areas. As the result of the evaluation, Affine transformation in large zone is the most appropriate coordinate transformation method fer Osan-Si.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.5
• /
• pp.404-411
• /
• 2009

We introduce in this paper a new method for smooth foldover-free warping of images, based on the vector field deformation technique proposed by Von Funck et al. It allows users to specify the constraints in two different ways: positional constraints to constrain the position of a point in the image and gradient constraints to constrain the orientation and scaling of some parts of the image. From the user-specified constraints, it computes in the image domain a C1-continuous velocity vector field, along which each pixel progressively moves from its original position to the target. The target positions of the pixels are obtained by solving a set of partial derivative equations with the 4th order Runge-Kutta method. We show how our method can be useful for texture mapping with hard constraints. We start with an unconstrained planar embedding of a target mesh using a previously known method (Least Squares Conformal Map). Then, in order to obtain a texture map that satisfies the given constraints, we use the proposed warping method to align the features of the texture image with those on the unconstrained embedding. Compared to previous work, our method generates a smoother texture mapping, offers higher level of control for defining the constraints, and is simpler to implement.