• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.8
• /
• pp.57-64
• /
• 2008

Corrugated flexible joint with bellows shape is widely used in many industrial fields as it provides a relatively simple means of absorbing mechanical vibration and deformation due to its inherent flexibility. In this study, an effective equivalent beam modeling technique of corrugated flexible joint bend using a commercial CAE software is proposed to reduce the excessive efforts and costs required for three dimensional shell modelling in vibration analysis of bellows shape structure. When this simple and practical technique, based on the strain energy concept, is employed to modify the beam sectional properties of the flexible joint bend, quite satisfactory results can be obtained.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.6
• /
• pp.525-532
• /
• 2015

In this paper, we propose an equivalent model of array antennas that use open-ended waveguides for effective EM simulation. We first investigate an individual element that consists of an open-ended waveguide and square ground plane. The waveguide length, aperture size, and ground size of the individual element are adjusted to give a similar radiation pattern to that of the individual element of the original antenna. We then apply the designed equivalent model to two different types of array antennas, such as a microstrip patch array and a waveguide array antenna. Comparison of the simulation results using the equivalent model with the results obtained with the original antenna reveals a difference in gain of less than 0.2 dB and a difference in half power beam width(HPBW) of less than $1^{\circ}$. The designed equivalent model is then mounted on a simple aircraft, and the simulation results are again compared to results from the original antenna. We find a 60 % reduction in simulation resources and time when compared with the original antenna model.

• Journal of IKEEE
• /
• v.8 no.1 s.14
• /
• pp.136-144
• /
• 2004

From the AC analysis results utilizing a two dimensional device simulator, the ac equivalent-circuit modeling of the ESD protection devices is executed. It is explained that the ac equivalent circuit of the NMOS protection transistor is modeled by a rather complicated form and that, depending on the frequency range, the error can be large if it is modeled by a simple RC serial circuit. It is also shown that the ac equivalent circuit of the thyristor-type pnpn protection device can be modeled by a simple RC serial circuit. Based on the circuit simulations utilizing the extracted equivalent circuits, the effects of the parasitics in the protection device on the characteristics of LNA are examined when the LNA, which is one of the important RF circuits, is equipped with the protection device. It is explained that a large error can result in estimating the circuit characteristics if the NMOS protection transistor is modeled by a simple capacitor. It is also confirmed that the degradation of the LNA characteristics by incorporating the ESD protection device can be reduced a lot by adopting the suggested pnpn device.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.1-11
• /
• 2000

An accurate technique to retrieve HEMT modeling parameters with measurements of S-parameters and DC characteristics of HEMT is proposed. The extrinsic series resistances among HEMT modeling parameters are determined by the FUKUI method using the measured DC characteristics. And other parameters are determined by the measured S-parameters by HP 8510C Network Analyzer with various values of DC bias. The transconductance retrieved from the measured S-parameters, however, shows only 0.078% error comparing with the measured gm values. Therefore, the S-parameters measured directly for an individual transistor should be used for an accurate determination of the model parameters. The procedure for the retrieval of the circuit modeling parameters redescribed in detail in this thesis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.124-129
• /
• 1992

이동 집중력 및 집중질량에 의한 이동하중을 받는 직사각형 보강판에 대하 여 보강재효과집중 모델링방법에 의거하여 보강판을 등방성 박판 및 보강재 효과를 반영한 등가보요소로 이루어진 판-보 조합체로 유한요소 모델링하고 Newmark의 직접 시간적분법을 이용한 동응답 해석방법을 정식화하였다. 일 련의 수치계산 예를 통하여 본 연구에서 제시한 방법이 이동하중을 받는 보 강판의 동응답 해석문제에 효과적으로 적용될 수 있음을 확인하였다. 아울러 parametric study를 통하여 이동하중이 작용하는 보강판의 동응답특성은 이 동하중의 질량효과를 고려하는 경우와 고려하지 않는 경우 매우 달라지며, 이동하중에 의한 동적응답은 이동속도가 증가할수록 정하중에 의한 응답보 다 증폭되어 나타나고 증폭비율이 질량효과를 고려할 경우 훨씬 더 커짐을 확인하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.11
• /
• pp.1012-1016
• /
• 2004

In the present paper, equivalent beam and equivalent bimorph beam models for IPMC(ionic Polymer-Metal Composite) actuators are described. Physical properties of an IPMC, such as Young's modulus and electro-mechanical coupling coefficient. are determined from the rule of mixture, bimorph beam equations, and measured force-displacement data of a cantilevered IPMC actuator. By using a beam equation with estimated physical properties, actuation displacements of a cantilevered IPMC actuator was calculated and a good agreement between the computed tip displacements and the measured data was observed. Finite element analysis(FEA) combined with the estimated physical properties was used to reproduce the force-displacement relationship of an IPMC actuator. Results from the FEA agreed well with the measure data. The proposed models might be used for modeling of IPMC actuators with complicated shapes and boundary conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1105-1111
• /
• 2015

The exhaust system is one of the major sources of vibrations, along with the suspension system and engine. When the exhaust system is connected directly to the engine, it transfers vibrations to the vehicle body through the body mounts. Therefore, in order to reduce the vibrations transmitted from the exhaust system, the vibration characteristics of the exhaust system should be predicted. Thus, the dynamic characteristics of the bellows, which form a key component of the exhaust system, must be modeled accurately. However, it is difficult to model the bellows because of the complicated geometry. Though the equivalent beam modeling technique has been applied in the design stage, it is not sufficiently accurate in the case of the bellows which have complicated geometries. In this paper, we present an improved technique for modeling the bellows in a vehicle. The accuracy of the modeling method is verified by comparison with the experimental results.

• The KSFM Journal of Fluid Machinery
• /
• v.11 no.4
• /
• pp.32-37
• /
• 2008

In this study, we have introduced an improved equivalent modeling technique for large scale composite wind-turbine blade. Conventional or general equivalent modeling procedure may give critical error in the analysis results because of geometric coupling effects. For the analyses of structural vibration and aeroelastic problems, the accuracy of equivalent structural models is very important since it can have high numerical efficiency and various practical applications. Three-dimensional realistic composite wind-turbine blade model is practically considered for numerical study. In order to validate the effect of the mass and the stiffness of the equivalent beam model, comparison study based on the natural vibration analysis has been conducted, and the accuracy levels of the conventional and modified equivalent modeling techniques are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7B
• /
• pp.1268-1278
• /
• 1999

In this paper, we propose an analytic method for dimensioning of traffic descriptors at the leaky bucket-based UPC for VBR MPEG video traffic on ATM networks. We analytically derive cell violation probabilities at the UPC by using the proposed scene-based video traffic model, and then we show that it is possible to select sets of traffic descriptors that have the same required violation probability. For two example video traces, numerical results show that our proposed traffic descriptors dimensioning method can approximate well the simulation-based traffic control results of the real video traces. When the effective bandwidth allocation method of an ON/OFF model is used for the call admission control in the networks, we present an efficient traffic descriptor selection method by studying the allocated bandwidth to each possible traffic descriptor set.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.1
• /
• pp.13-27
• /
• 2011

This paper presents an investigation of the structural stability of cable-stayed bridges, using geometric nonlinear finite-element analysis and considering various geometric nonlinearities, such as the sag effect of the cables, the beam-column effect of the girder and mast, and the large displacement effect. In this analytic research, a nonlinear frame element and a nonlinear equivalent truss element were used to model the girder, mast, and cable member. The live-load cases that were considered in this research were assumed based on the traffic loads. To perform reasonable analytic research, initial shape analyses in the dead-load case were performed before live-load analysis. In this study, the geometric nonlinear responses of the cable-stayed bridges with different cable arrangement types were compared. After that, parametric studies on the characteristics of the structural stability in critical live-load cases were performed considering various geometric parameters, such as the cable arrangement type, the stiffness ratios of the girder and mast, the area of the cables, and the number of cables. Through this parametric study, the effect of geometric shapes on the structural stability of cable-stayed bridges was investigated.