• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.10a
• /
• pp.43-46
• /
• 2006

본 논문은 PCB(printed circuit board)에 납땜이 되어 장착된 부품들의 들뜸 상태 검사 알고리즘에 관한 연구이다. 전자산업의 발달로 제품이 소형화, SMD화, 고집적화가 함께 추구되고 있으며, 특히 리드(lead)의 fine-pitch화 현상으로 인해 부품의 들뜸 상태 검사의 중요성은 매우 부각되고 있다. 따라서 본 논문에서는 2차원 포인터 레이저 거리센서를 이용하여 PCB위에 장착된 부품의 들뜸 상태를 검사하고자 한다. 이를 위해 레이저 측정용 장치를 제작하여 부품의 들뜸 검사 알고리즘의 유용성 및 들뜸의 상태 판단 여부를 확인하였다. 본 논문에서 사용한 기준 부품은 각칩 형태로 된 저항, 커패시터와 BGA 및 QFP이며 이 부품들을 이용하여 리드와 바디의 들뜸 상태를 검사하였다. 검사 기준으로 리드의 들뜸은 Scan Teaching 방식을 이용하였으며, 바디의 들뜸은 단차 Teaching 방식을 이용하였다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.914-917
• /
• 2008

This paper was to discuss the case and cause of debonding defect of wood floor board in apartment house by investigating actual survey. Most frequent defect in wood floor board was debonding of floor board. Scratch, gap and crack of floor board were also found in floor board installment work. Causes of debonding of floor board is shrinkage of cement mortar beneath floor board and expansion of floor board. Haste in floor board work did not provide enough time to dry cement mortar fully, which led to continue to dry after the installment of floor board. It caused moisture movement toward wood floor board. Accordingly, Before floor board work, careful consideration on moisture condition of cement mortar and enough curing time to eliminate the effect of moisture are taken into.

• Journal of the Korean Magnetics Society
• /
• v.21 no.4
• /
• pp.121-126
• /
• 2011

Spin dynamics of magnetic tunnel junctions with free and fixed reference layers is investigated by ferromagnetic resonance micromagnetic simulations. First, in magnetic tunnel junctions with an exchange biased synthetic ferrimagnetic reference layer, a magnetization direction of each layer and the tunneling magnetoresistance are calculated for a DC magnetic field. To investigate the spin exciting modes in magnetic tunnel junctions, we simulate the ferromagnetic resonance frequency spectra with small RF magnetic fields. Exciting modes of the tunneling magnetoresistance calculated by an included angle between free and reference layers is interpreted from those of each layer. Spin exciting modes are different according to a signs of the DC magnetic field. In a negative magnetic field, FMR frequency spectra of free and reference layers are well elucidated by the modified Kittel's equation. However, in a positive magnetic field, there is no simple analytic solution related to FMR frequency spectra due to the coupled modes. Since ferromagnetic layers in magnetic tunnel junctions are interactive each other, careful considerations of the reference and fixed layer as well as the free layer are required for understanding on the spin dynamics of magnetic tunnel junctions with an exchange biased synthetic ferrimagnetic reference layer.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.598-606
• /
• 2001

Recently, semiconductor packages trend to be thinner, which makes difficult to detect defects therein. A preconditioning test is generally performed to evaluate the reliability of semiconductor packages. The test procedure includes two scanning acoustic microscope (SAM) tests at the beginning and end of the entire test, in order to help detect physical defects such as delaminations and package cracks. In particular, of primary concern are package cracks and delaminations caused by moisture absorbed under ambient conditions. This paper discusses the failure mechanism associated with the moisture absorbed and encapsulated in semiconductors, and the use SAM to detect failures such as tracks and delaminations grown during the preconditioning test.

• Korean Journal of Optics and Photonics
• /
• v.9 no.4
• /
• pp.231-235
• /
• 1998

Passively Q-switched, laser diode(LD) end-pumped Nd:YAG laser was demonstrated by using $Cr^{4+}$:YAG as a saturable absorber. In addition , we could calculate an excitation efficiency, which is an important parameter to evaluate the pumping geometry, directly by measuring the absorbed power in Nd:YAG at threshold condition. We found that output parameters such as average power, pulse duration, and repetition rate strongly depended on the low intensity transmission of $Cr^{4+}$:YAG and driving current of lase diode. The maximum Q-switched output power of 1 W was obtained with 40 kHz repetition rate. The pulse duration was varied from 50 ns to 200 ns.

• Journal of the Korean Society for Railway
• /
• v.15 no.3
• /
• pp.251-256
• /
• 2012

Hanging sleepers are frequently observed in the ballasted track with the rail of high rigidity. These hanging sleepers at the high speed line could cause such large dynamic force compared to those at the conventional line. This dynamic force would, in turn, deteriorate train running stability as well as riding comfort, and accelerate irregularity of track and failure of track materials, leading to a sharp increase in track maintenance cost. When the wheel-rail contact spring exhibits nonlinear behavior and some components of the system like hanging sleeper exhibit bi-linear behaviors, an effective analytical method is proposed for train-track interactions. The verification of the present method is carried out comparing numerical results by the present method and those by Ono's method of RTRI.

• Journal of the Korean Chemical Society
• /
• v.42 no.3
• /
• pp.285-291
• /
• 1998

Methods to determine EU(Ⅲ) ion in aqueous solution by fluorescence spectrometry based upon the ligand sensitized fluorescence of Eu(Ⅲ)-terephthalic acid (TPA) complex ion have been studied. The effects of excitation wavelength, pH, concentration of TPA and emission wavelength on the fluorescence intensity were investigated. The fluorescence intensity of the Eu(Ⅲ) complex ion was further increased with addition of trioctylphosphine oxide (TOPO). In this case Triton X-100 was used to dissolve TOPO in aqueous solution. The calibration curve for Eu(Ⅲ) was linear over the range from $1.0{\times}10^{-6}M\;to\;4.0{\times}10^{-4}M$ and the detection limit was $1.0{\times}10^{-6}M$ under the experimental conditions of 256 nm, 5.6, $3.5{\times}10^{-4}$M$ and 615 nm for excitation wavelength, pH, concentration of TPA and emission wavelength, respectively. When TOPO was added to the Eu(Ⅲ)-TPA system, the concentration range of linear response and the detection limit were $1.0 {\times}10^{-9}M\;to\;1.0{\times}10^{-4}M,\;1.0{\times}10^{-7}M,$ respectively under the experimental conditions of 284 nm, 4.4 and $1.0{\times} 10^{-4}M$ for excitation wavelength, pH and concentration of TOPO, respectively. Effects of interferences from various cations for the determination of Eu(Ⅲ) ion were also investigated.

• Journal of the Korean Chemical Society
• /
• v.44 no.6
• /
• pp.541-546
• /
• 2000

Methods to determine L-dopa(L-3,4-dihydroxyphenylalanine) in aqueous solution by spectrofluorimetry based upon the ligand sensitized luminescence of Tb(III) ion L-dopa complex have been studied. Tb(III) ion and Lu(III) ion were used as ligand sensitized fluorescencer and co-fluorescence enhancer, respectively. The effects of excitation wavelength, pH, concentration of Tb(III) ion, concentration of Lu(III) ion and emission wavelength on the fluorescence intensity were investigated. The fluorescence intensity of the Tb(III) ion L-dopa complex was further increased with addition of Lu(III) ion. The calibration curve for L-dopa was linear over the range from 5.0 ${\times}$ $10^{-7}$ M to 1.0${\times}$ $10^{-4}$ M and the detection limit was 4.0 ${\times}$ $10^{-8}$ M under the optimal experimental conditions of 300 nm, 8.0, 1.0 ${\times}$ $10^{-4}$ M and 545 nm for excitation wavelength, pH, concentration of Tb(III) ion and emission wavelength, respectively. When Lu(III) ion was added to Tb(Ⅲ) ion L-dopa complex, the concentration range of linear response and detection limit were 1.0${\times}$$10^{-8}$ M to 2.0 ${\times}$ $10^{-4}$ M and 1.0 ${\times}$ $10^{-9}$ M, respectively under the optimal experimental conditions of 300 nm, 8.5, 1.0 ${\times}$ $10^{-5}$ M, 1.0 ${\times}$ $10^{-5}$ M, 545 nm for excitation wavelength, pH, concentration of Tb(III) ion, concentration of Lu(III) ion and emission wavelength, respectively.

• The Science & Technology
• /
• v.19 no.1 s.200
• /
• pp.48-57
• /
• 1986

- DATA파이프 - 화학품 생산을 위한 바이오매스의 이용 - 선형 프로그래밍 산법 - 복합질병을 위한 왁찐 - 말라리아 왁찐 - 데이터 기록용의 확장식 디스크매체 - 생세포의 냉동보존용 전산화 시각분석법 - 콜버그완 - 중유회수의 능률향상 - 충돌 들뜸체계이용 소프트 X선 레이저 - 스터얼링 사이클 저온 냉각기 - 셀데인 - 플라즈마 체계이용 소프트 X선 레이저 - 수력터빈 시스템 - 암호시스템을 해독하는 산법 - 균일한 크기의 극히 미세한 물질을 형성하는 공정 - 마그네켄치 - 리그닌 퇴화효소 - 코즈믹 튜브 - 테라비트 Km/Sec용량의 광전송 - 폴리머-세라믹 복합체 - 노바 - 살아있는 뇌의 신경 수용체를 보고 측정하는 방법

• Analytical Science and Technology
• /
• v.6 no.3
• /
• pp.275-282
• /
• 1993

A direct and simultaneous method to determine the $SiO_2$ and $ZrO_2$ in zircon sand of raw mineral and its treated one were studied by optical emission spectrometer using DC arc source. The synthetic standard was prepared by mixing with pure metal oxide, and it was diluted with buffer(graphite) and flux($Li_2B_4O_7$). The mixing ratio of buffer and flux and its dilution ratio to sample was investigated in order to choose the best excitation conditions. The optimum mixing and dilution ratios were 0.22:1 and 40, and the standard deviations of analytical results were 1.9% for $SiO_2$ and 4.7% for $ZrO_2$.