• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.673-676
• /
• 2017

The Offshore drilling system of domestic drilling systems (drill rigs, drill ship) in Korea is dependent on full imports and the monopolistic situation of a few foreign large corporations is intensifying. In addition, most of domestic technology development tries to develop single product oriented products until now, but it is necessary to develop monitoring control system for package unit commercialization by approaching package development method. Therefore, we will develop a control monitoring system that can integrate the single equipment of the mud system developed previously.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.130-138
• /
• 2012

There are increasing demands from the industry for intelligent robot-calibration solutions, which can be tightly integrated to the manufacturing process. A proposed solution can simplify conventional robot-calibration and teaching methods without tedious procedures and lengthy training time. iGPS(Indoor GPS) system is a laser based real-time dynamic tracking/measurement system. The key element is acquiring and reporting three-dimensional(3D) information, which can be accomplished as an integrated system or as manual contact based measurements by a user. A 3D probe is introduced as the user holds the probe in his hand and moves the probe tip over the object. The X, Y, and Z coordinates of the probe tip are measured in real-time with high accuracy. In this paper, a new approach of robot-calibration and teaching system is introduced by implementing a 3D measurement system for measuring and tracking an object with motions in up to six degrees of freedom. The general concept and kinematics of the metrology system as well as the derivations of an error budget for the general device are described. Several experimental results of geometry and its related error identification for an easy compensation / teaching method on an industrial robot will also be included.

• Sleep Medicine and Psychophysiology
• /
• v.6 no.2
• /
• pp.149-157
• /
• 1999

A Computerzed Neuropsychological Test(CNT) system using multimedia and object oriented technologies are developed for clinical application in psychiatry. The developed system is composed of 14 neuropsychologial tests which are capable of evaluation of various cognitive functions and functional localization of brain. The system employs Microsoft Window based graphic user interface for easy operation and it has a touch screen and a mouse as input devices from the patient. Speech perception test, color word test, verbal memory test, contingent continuos performance test, and trail making test were translated into korean language, so that usefulness of tests was maximized. Through the results of utilization of this system in the cases of patients with head trauma and psychiatric desorder, this system can be proved to be useful in the evaluation of cognitive function and functional localization of brain.

• Resources Recycling
• /
• v.19 no.1
• /
• pp.57-65
• /
• 2010

Recently, we have investigated the recovery of resources from the waste material of manufacturing printed circuit board. As printed circuit board or chip has become light, small, high reliability, it is necessary to reuse and recover resources from them. Especially, the printed circuit board that has been used for important mobile electronic pans are plated with min.0.03 ${\mu}m$ to max.50 ${\mu}m$. As increasing the cost of gold, raw material, chemicals, payments and waste material, it has been accelerated the competition for reuse and recovery. But, it is insufficiency of technician and equipments for the recovery of effective resource. In this paper, as analyzing the technical trend of gold recovery and waste back board from the manufacturing process of printed circuit board, it may be effective of recycling, further more it may be contributed to develop the valuable resources.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.9-16
• /
• 2008

Ribbed birch (Betula costata Trautv.), Japanese larch (Larix kaempferi (Lamb.) Carr.), and tulip tree (Liriodendron tulipifera L.), were used as experimental specimens to measure the sound absorption coefficient with various resonator types, regular resonator (Type-R), eccentric resonator (Type-E), aligned resonator (Type-A), and screwed resonator (Type-S). Resonators consisted of the simple perforation by hand drilling. Sound absorption performances of the resonators installed perforations were better than those of untreated specimens. They were varied with the resonator's type and wood species. Increased area by a wood screw gave no significant change on the sound absorption.

• Journal of the Korean Society for Library and Information Science
• /
• v.52 no.2
• /
• pp.103-123
• /
• 2018

The purpose of this study is to evaluate the user's perception and usability of the unmanned smart library and to derive the improvements. After reviewing the literature on smart technology and smart equipment, we surveyed users who use unmanned smart library installed in Sejong City and Pohang City, and questioned the use, operation and service satisfaction of unmanned smart library. Based on the results of the analysis, we suggested ways to improve the unmanned smart library and draw users to the library. Unattended smart library users varied in age and educational background, and they were most interested in borrowing books and were satisfied with their overall use.

• Journal of the KSME
• /
• v.20 no.3
• /
• pp.184-193
• /
• 1980

제1절에서는 CAD/CAM 이 기계공업의 발전에 중요한 역할을 담당하고 있으며 그 이유가 무엇 인가를 설명하였다. 설명의 목적은 이와 같은 역사적인 흐름을 정확히 제시하므로써 우리 기계 공업이 나가는 방향을 설정하는데 있어 정확한 상황판단을 도우려 하였다. 제2절, 제3절 및 제4 절을 통해 CAD/CAM의 내용이 무언가를 설명 하였다. 제2절에서는 현대적 의미의 CAD/CAM을 설명하였고 제3절과 제4절에서 는 이에 필요한 전자계산기 System의 Hardware 와 Software를 설명하였다. 특히 제3절의 Work Station의 구성은 사람과 기계간의 직접적인 대화 수단이라는 면에서 대단히 중요한 의미를 가지며, 제4절에 설명된 각 Software에 의해 수행되고, 형성, 전 달되는 Data Base의 생성과 그 이용은 재래의 생산과정에서 발생되는 여러 문제가 어떻게 전 자계산기 내에서 처리되는지를 이해하는데 도움을 준다. 비록 우리의 기계공업이 아직 선진기 술을 받아드릴 여건이 되어 있지 않다 하더라도 외국의 발전 상황에 항상 정확한 정보를 입수 하고 있어야 한다. 이와 같이 정확한 자기 위치의 판단은 외국과의 기술제휴나 기술교류에 있어 가 능한 좋은 조건을 선택할 수 있는 기본이 되는 것이며 자체연구의 방향을 정확히 제시할 수 있는 능력을 가질 수 있는 것이다. 제5절에서는 CAD/CAM의 국내현황과 방향에 대해 언급하 였다. 국내의 기술수준의 후진성 때문에 협의의 CAD/CAM과 현대의미의 CAD/CAM이 명확한 구별 없이 사용되었다. 결론적으로 각 기업은 가까운 미래에 당면할 사태를 준비한다는 입장 에서 하루빨리 전자계산기를 생산 활동에 사용할 수 있도록 하여 필요한 요원을 교육하는 것이 바람직하다. 초기에 큰 투자없이 System을 개발 사용하기 위하여 기존 전자계산소를 이용하는 방법이 바람직하며 System의 도입은 자체운영을 결정하기 전에 경제적인 여건 등 여러가지 문제를 검토하여야 한다. 특히 Turn Key Base로 System를 도입할 경우에는 System의 도입목 적과 사용빈도, 앞으로의 확장성 현재 설계및 생산 과정과의 마찰가능성, 유지보수문제 등을 신 중히 검토하여야 한다. 이제 기계공업도 전자계산기를 이해하고 사용하므로 서 발전할 수 있는 단계가 되었다. 예로부터 좋은 공구를 개발하여 적절히 사용하는 것이 기계공업 발전의 첩경이 었다. 전자계산기는 현대 기술이 개발한 가장 강력하고 사용하기 좋은 공구이다.

• Resources Recycling
• /
• v.21 no.1
• /
• pp.82-92
• /
• 2012

There are several kinds of tungsten carbide(WC) such as light bulbs, metal cutting tools, drill bits, mining tools, military ordinance, high speed tool steels, chemicals/catalysts, wear resistance parts, jet engine turbine blades, etc.. These days it has been widely studied for the recycling technologies of the used tungsten carbide(WC) from view points of economy and efficiency. In this paper, open/registered patents of US, JP, EP, and KR and SCI Journal related to recycling technologies of the used Tungsten Carbide(WC) between 1969-2011 were reviewed. Patents and papers were collected using key-words searching and filtered by filtering criteria. The trends of the patents and papers was analyzed by the years, countries, companies, and technologies.

• Journal of Drive and Control
• /
• v.14 no.4
• /
• pp.1-8
• /
• 2017

The Down-the-Hole hammer is one of the pneumatic drill equipment used for grinding, drilling, and mining. One the advantages of which is that a reduction work efficiency at deep site are relatively small compared to other drilling methods. Due to the large vibration in the underground area, it is difficult to measure the performance of the hammer, and hammer testing requires substantial production cost and operating expenses so research on the development of the hammer is insufficient. Therefore, this study has developed a dynamic simulation model that apprehends the operating principles of an 8-inch DTH hammer and calculates performance data such as performance impact force, piston speed, and BPM. By using the simulation model, design factors related to strike force and BPM were selected, and the influence of each design factors on performance was analyzed through ANOVA analysis. As a result, be the most important for BPM and the strike force are position of upper port that push the piston in the direction of the bit and in BPM, the size of the empty space between the bits and the piston is the second most important design factor.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.27 no.2
• /
• pp.97-104
• /
• 2018

Mandibular anterior region has high implant survival rates and better accessibility compared with any other region. Even if there are possibilities for perforation on lingual cortical bone due to improper drilling and bleeding caused by lingual artery damage, mandibular anterior region is a safe region because less amount of major anatomical structures exist compared with other regions. However, because of narrow bucco-lingual width of alveolar ridge, it is challengeable to obtain esthetic implant prosthesis. Although patients are less sensitive subjectively, mandibular anterior region is as difficult as maxillary anterior region in that implant placement location plays a critical role on the prognosis of implant prosthesis. One-piece implant is a very useful option for mandibular anterior region. Considering the narrow roots and thin alveolar bone of mandible, it is clinically difficult for implant diameter to be greater than 3mm In this case, we could approach the esthetic restoration in mandibular anterior region with one-piece implant and immediate loading.