• Journal of the Korean Magnetics Society
• /
• v.15 no.6
• /
• pp.332-335
• /
• 2005

Output voltage of the flux-meter has always drift due to the input bias current of non-ideal operational amplifier. In this study we have employed a digital sample and hold amplifier which has no voltage drop to compensate drift of the flux-meter automatically. The drift of the developed flux-meter was smaller than $5{\times}10^{-8}\;Wb/s$ for the integration time constant of $RC=10^{-3}$ s.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.7
• /
• pp.914-920
• /
• 2003

In this paper, we deal with two drift compensation algorithms of acceleration sensor for measuring the galloping on power transmission line. Firstly, the block diagram of galloping measurement system is given and a galloping model is presented. Secondly, two compensation algorithms, a simple compensation and a period compensation, are proposed. A simple compensation algorithm uses the drifts of velocity and distance at fixed periods, so it is useful for constant drift case. Next, a period compensation algorithm can compensate a periodic drift. This algorithm uses the previous measured data and compensated data for constant period, where the period is obtained by FFT method. Lastly, the effectiveness of proposed algorithms is verified by comparing between two algorithms in simulation, and its characteristics and the drift error bound are shown, respectively.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.59-63
• /
• 2001

기존 스케일러빌러티(scalability) 동영상 부호화 알고리듬 의 문제점을 개선하기 위하여 본 논문에서는 다중 레퍼런스 프레임 방법을 기저 계층(base layer)과 확장 계층(enhancement layer)의 움직임 보상시 사용하여, 부호화 효율 및 드리프트 현상을 현저히 감소시키는 효과를 가져온다. 전산 모의 실험을 통하여 제안 알고리듬은 기존의 H.263+ 알고리듬에 비해 스케일러빌러티 모드를 작동하였을 때와 작동하지 않았을 경우 모두에 대해 더 나은 부호화 효율을 보여 주고, 이전 레퍼런스 확장 계층이 네트웍 사정으로 전송되지 않았을 경우에도 제안하는 알고리듬은 거의 화질의 손실이 없이 복원할 수 있음을 보여준다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.22-26
• /
• 2005

본 연구는 매년 발생하는 홍수와 폭우에 따른 수자원 관리 및 대규모 자연재해(수해)방지를 위한 실시간 원격수위계측시스템 개발에 관한 것이다. 본 연구에서 개발한 고정밀 수위계측센서는 지리적, 환경적 여건을 고려하여 온도보상 및 드리프트 보상이 가능하며 무선통신 시스템을 이용하여 측정된 값을 관리서버에 DB화 할 수 있도록 하였다. 또한 GIS와 연계하여 실시간으로 하천 유역의 유량 및 수위를 모니터링 할 수 있도록 하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.345-346
• /
• 2007

• Journal of Sensor Science and Technology
• /
• v.5 no.3
• /
• pp.17-24
• /
• 1996

In order to reduce the offset and its temperature drift by the different properties of the piezoresistors and the residual stress of the piezoresistive pressure sensor, a double Wheatstone-bridge pressure sensor was studied. Because the compensation bridge was arranged near by the pressure sensitive bridge, which have the similar offset component, reduction of the offset and its temperature drift was realized by the mathematical subtraction of the output of two bridges. It was configured the compensation of the offset and its temperature drift. By this compensation method, the offset and its temperature drift were reduced approximately 95% respectively. The sensitivity of the fabricated pressure sensor was $11.7\;mV/Vkg/cm^{-2}$ for $0.9\;kgfcm^{-2}$ full-scale pressure range.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.63-70
• /
• 2008

In this paper, a smart sensor system for the MEMS pressure sensor was developed. A compensation algorithm and programmable calibration circuits were presented to eliminate errors caused by temperature drift of piezoresistive pressure sensors in itself. This system consisted of signal conditioning, calibration, temperature detection, microprocessor, and communication parts and these were integrated into a SOC. A RS-232 interface was employed for monitoring and control of a smart sensor system. The area of fabricated IC is $4.38{\times}3.78\;mm^2$ and a $0.35{\mu}m$ high voltage CMOS process was used. Compensation error for temperature drift of 50 KPa pressure sensors was measured into ${\pm}0.48%$ in the range of $-40^{\circ}C{\sim}150^{\circ}C$. Total power consumption was 30.5 mW.

• Journal of Sensor Science and Technology
• /
• v.7 no.5
• /
• pp.300-305
• /
• 1998

In this paper, integrated pressure sensor with calibration of offset voltage and full scale output and temperature compensation of offset voltage and full scale output were designed. The signal conditioning circuitry are designed that calibrate the offset voltage and full scale output to desired values and minimize the temperature drift of offset voltage and full scale output. Designed circuits are simulated using SPICE in a bipolar technology. The ion implanted resistor of different temperature coefficient were used to trimming the desired values. As a results, offset voltage was calibrated to 0.133V and the temperature drift of offset voltage was reduced to $42\;ppm/^{\circ}C$. Also, the full scale output was calibrated to 4.65V and the temperature coefficient of full scale output was reduced to $40ppm/^{\circ}C$ after temperature compensation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.151-151
• /
• 2004

현재 세계 기술은 고집적화, 소형화, 고속화, 정밀화 된 시스템을 추구하고 있으며 기계적인 요소와 전기적인 요소를 통합한 장비의 개발에 초점을 맞추고 있다. 그 예로 일렉트로닉스, 옵토일렉드로닉스, 옵틱스, MEMS 등을 들 수 있다. 이러한 장비들은 초정밀 위치 결정을 위해 미크론 단위 또는 나노 단위의 분해능을 가진 구동기가 필요하다. 이러한 구동기에 많이 사용되는 대표적인 재료에는 자기변형 재료와 압전 재료가 있다. 압전 재료는 현재 구동기에서 가장 많이 사용되는 재료이지만 피로현상, 드리프트 및 출력 힘이 작은 문제점을 가지고 있다.(중략)

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.132-133
• /
• 2002

자속밀도를 측정하기 위한 방법으로 Hall 효과; NMR, Fluxgate 등의 다양한 방법등을 사용하고 있다. 그러나 가장 많이 사용되는 방법이 Faraday 전자기 유도 법칙을 이용하여 자속밀도를 측정하는 방법이다. 이 경우 탐지코일에 유도되는 기전력이 자속의 시간 변화율에 비례하기 때문에 자속을 측정하기 위해서는 탐지코일에 유도되는 기전력을 적분을 하여야 한다. (중략)