• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.786-791
• /
• 2004

This study proposed the analysis of mass position detection and modified stiffness due to the change of the mass and stiffness of structure by using the original and modified dynamic characteristics. The method is applied to examples of a cantilever and 3 degree of freedom by modifying the mass. The predicted detection of mass positions and magnitudes are in good agreement with these from the structural reanalysis using the modified mass.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.335-338
• /
• 2010

구조물의 상태평가는 구조물 고유의 동특성을 분석함으로써 평가할 수 있다. 구조물은 태풍, 지진 및 기타 외적 환경 등에 의하여 손상이 발생하고 이러한 구조물의 손상은 강성의 변화로 이어져 구조물의 동특성에 변화를 일으킨다. 따라서 손상 발생 전후의 동적응답을 각각 계측한 후 구조물 식별(Structural System Idetification)을 통하여 고유진동수 및 모드형상을 추출하고 수학적인 기법을 사용하여 구조물을 구성하고 있는 개별 부재 혹은 부재 그룹의 강성을 비교함으로써 손상의 발생여부 및 손상정도를 추정할 수 있다. 본 연구에서는 지붕트러스 구조물에 대하여 손상평가를 수행하고 이를 검증할 수 있는 Mock-up 구조물을 설계 및 시공하였다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2001.11a
• /
• pp.38-42
• /
• 2001

• Journal of KSNVE
• /
• v.6 no.3
• /
• pp.274-285
• /
• 1996

본 글에서는 대형차량의 엔진 마운트 과정과 마운트 설계시 필요한 사항들에 대하여 간략히 정리해 보았다. 먼저 2장에서는 비교적 형상이 간단한 대형 차량의 마운트 강성을 정확히 설계하는 과정을 제시하였는데, 이 방법에 따라 아운트 재질에 대한 탄성계수를 데이터 베이스화 함으로써 다양한 경우에 원하는 특성을 갖는 마운트를 쉽게 설계할 수 있음을 보였다. 3장에서는 마운팅 설계를 위한 기초 데이터 -관성특성 및 가진력 등에 대하여 기술하였으며, 4장에서는 마운트 최적 설계과정을 정리하였다. 여기서 마운트의 강성을 선정하는 방법과 프레임의 유연성이 엔진 동특성에 미치는 영향을 고찰 최적화하는 과정을 기술하였다. 또한 시혐적 검토에 의한 평가방법을 5장에서 서술함으로 일반적인 엔진 마운트에서의 최적 설계에 대한 내용을 서술하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.6
• /
• pp.463-469
• /
• 2004

In order to improve the instability of journal bearings, the leaf spring dampers (LSD) are introduced. The effects of LSD on the stability of journal bearings are investigated theoretically The stability of the journal bearing with LSD are compared with the results of the journal bearing without LSD. And the effects of the asymmetry of the stiffness of the leaf spring damper on the stability of rotors are also investigated.

• Aerospace Engineering and Technology
• /
• v.6 no.1
• /
• pp.201-208
• /
• 2007

A fuel pump and turbine rotordynamic design is performed for a 75 ton thrust liquid rocket engine. A distance from the rear bearing to the turbine was considered as a design parameter for load distribution of the bearings. Asynchronous eigenvalue analysis was performed as a function of rotating speeds, turbine mass and bearing stiffness to investigate critical speed of the fuel pump and turbine. From the numerical analysis, it is found that the effect of the front bearing stiffness is negligible in the critical speed due to the large mass moment of inertia of the turbine. With the rear bearing stiffness over $2{\times}10^{8}N/m$ and the turbine mass below 20 kg, the critical speed of the fuel pump and turbine in long shaft case is at least 70 % higher than the operating speed 11,000 rpm.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.1
• /
• pp.73-80
• /
• 2010

Wind-induced vibration is one of the important structural design factors for serviceability of tall buildings. In order to evaluate the reliable wind-loads and wind induced-vibration, it is necessary to obtain the exact natural period of buildings. The discrepancy in the natural period estimation often results in the overestimation of wind loads. In this study, the effectiveness of lateral stiffness estimation method for tall buildings with flat plate system is evaluated. For this purposed, the results of finite element analysis of three recently constructed buildings are compared with those obtained from field measurement. For the analysis, factors affecting on the lateral resistance such as cracked stiffness of vertical members, elastic modulus of concrete, effective slab width, and cracked stiffness of link beam are considered. Form the results, it is found that the use of non-cracked stiffness and application of dynamic modulus of elasticity rather than initial secant modulus yields closer analysis result to the as-built period.

• Journal of the Korea Concrete Institute
• /
• v.22 no.1
• /
• pp.41-50
• /
• 2010

Long-term floor deflection caused by excessive construction load became a critical issue for the design of concrete slabs, as a flat plate is becoming popular for tall buildings. To estimate the concrete cracking and deflection of an early age slab, the construction load should be accurately evaluated. The magnitude of construction load acting on a slab is affected by various design parameters. Most of existing methods for estimating construction load addressed only the effects of the construction period per story, material properties of early age concrete, and the number of shored floors. In the present study, in addition to these parameter, the effects of shore stiffness and concrete cracking on construction load were numerically studied. Based on the result, a simplified method for estimating construction load was developed. In the proposed method, the calculation of construction load is divided to two steps: 1)Onset of concrete placement at a top slab. 2)Removal of shoring. At each step, the construction load increment is distributed to the floor slabs according to the ratio of slab stiffness to shore stiffness. The proposed method was compared with existing methods. In a companion paper, the proposed method will be verified by the comparison with the measurements of actual construction loads.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.10a
• /
• pp.177-183
• /
• 1993

본 연구에서는 범용 구조 해석 패키지인 MSC/NASTRAN을 이용하여 대형 구조물인 안테나 각 분계의 동특성을 파악하고, 부분구조합성법을 이용하여 구조물 전체의 동특성을 파악하였다. 또한 구조물의 주파수 응답 함수를 이 용하여 지배적인 고유모드를 구하였고, 각 분계의 변형 및 운동 에너지를 산 출하여 전체 고유모드에 대한 분계의 에너지 기여도 파악하였으며, 이와 같 은 진동 요인 분석에 따른 진동 대책으로, 변형 및 운동 에너지 기여도가 높 은 분계의 질량 및 강성 변경에 따른 구조물의 동특성 변화를 예측함으로 구조물의 동특성 개선의 방향을 제시하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.3
• /
• pp.293-300
• /
• 2015

In this study, a series of forced vibration testing and ambient vibration measurement were performed at a lowrise masonry-infilled reinforced concrete frame structure before and after seismic retrofit and its dynamic properties were extracted using system identification techniques. Also, analytical models which show similar dynamic properties to the measures ones were constructed. The system identification results showed that damping ratios in x direction along which the dampers were installed has been increased. From the comparison between the analytical models, the effective stiffness of post-installed member and post-reinforced members(shear walls and damper frames) were only 50% of gross sectional stiffness of the members, which indicates that the these members were not fully integrated with the existing structure or members. In addition, support condition of post-installed footing has to be pinned in y direction to match the dynamic properties, which is seemingly caused by the change of fixity of the soil due to the installation of new footing.