• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.4
• /
• pp.73-77
• /
• 2017

Recently, fingerprint sensors have widely used for personal information security, and require quality evaluation to reduce an error of their recognition rate. Quality of fingerprint sensors is evaluated by variation of their electrical resistance introducing by contacts between a probe tip and a sensor electrode, Investigation on the materials compatability and structure optimization of probe is required to reduce deformation of sensor electrode for repeatability of quality testing. Nickel, steel(SK4), beryllium copper, and phosphor bronze were considered as probe materials, and beryllium copper was the most appropriate for materials of probe tips, considering indentation and contact resistance while being contacted probe tips on electrodes. Probes of an inspection part were manufactured with the single-unit structure for physical damage prevention and parallel processing capability. Inspection repeatability was evaluated by voltage variation of fingerprint sensors when the specific current was applied. A single-unit inspection part with beryllium copper probe tips showed excellent repeatability within ${\pm}0.003V$ of its voltage variation.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.203-206
• /
• 2007

연속 전자 모델과 결합된 종래의 분자 동역학 방법은 원자 사이의 힘과 원자의 전기용량에 의해 야기되는 탄소 나노튜브의 구부러지는 성질의 특성을 해석하였다. 탄소 원자의 전기 용량은 탄소 원자의 길이에 따라 변하였다. 본 연구는 11.567nm($L_{CNT}$)의 길이와 $0.9{\sim}1.5nm(H)$의 안쪽 깊이를 가진 (5,5) 탄소 나노튜브 브리지로 MD 시뮬레이션을 수행하였다. 탄소 나노튜브는 금 표면에 부딪힌 후 탄소 나노튜브 브리지는 약 ${\sim}1{\AA}$의 크기로 금 표면에서 진동하며, 크기는 차츰 감소하였다. $H{\leq}1.3nm$일 때, 탄소 나노튜브 브리지는 첫 번째 충돌 후에 금 표면과 계속 접촉해 있었고, $H{\leq}1.4nm$일 때, 탄소 나노튜브 브리지는 몇 번의 충돌 후에 금 표면과 안정한 접촉상태가 되었다. $H/L_{CNT}$가 0.13보다 작을 때, 탄소 나노튜브 초소형 전자기기 메모리는 반영구적인 비활성의 메모리 장치가 되는 반면에 $H/L_{CNT}$가 0.14보다 클 때 탄소 나노튜브 초소형 전자기기 메모리는 휘발성이거나 스위치 장치로 동작할 수 있다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.12
• /
• pp.1535-1540
• /
• 2013

We propose a finite element modeling method considering the ball bearing contact mechanism, and the developed method was verified through experimental and analytical results of inner and outer race-type rotor systems. A comparison of the proposed method with conventional method reveals that there is little difference in the results of the inner race-type rotor system, but there are considerable differences in the results of the outer race-type rotor system such that predictions of greater accuracy can be made. Therefore, the proposed method can be used for accurately predicting the dynamic characteristics of an outer race-type rotary machine.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.6
• /
• pp.659-665
• /
• 2010

This paper proposes a control algorithm for quadruped robots moving on irregularly sloped uneven surfaces. Since the body balance of a quadruped robot is controlled by the forces acting on its feet during touchdown, the ground reaction force (GRF) is controlled for stable running. The desired GRF for each foot is generated on the basis of the desired galloping pattern; this GRF is then compared with the actual contact force. The difference between the two forces is used to modify the foot trajectory. The desired force is realized by considering a combination of the rate change of the angular and linear momenta at flight. Then, the amplitude of the GRF to be applied at each foot in order to achieve the desired linear and angular momenta is determined by fuzzy logic. Dynamic simulations of galloping motion were performed using RecurDyn; these simulations show that the proposed control method can be used to achieve stable galloping for a quadruped robot on irregularly sloped uneven surfaces.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.6
• /
• pp.325-331
• /
• 2022

Hydrogen embrittlement in metals has been a serious issue with regard to structural safety. In this study, molecular dynamics simulations revealed that the aggregation of hydrogen atoms at the crack tips suppresses the dislocation emission and thus results in cleavage fracture. A series of molecular dynamics simulations were performed considering factors such as the concentration of hydrogen atoms, loading rate, and diffusion coefficient. We investigated the conditions that minimize hydrogen embrittlement. The simulation results were consistent with the experimental results and used to quantify hydrogen embrittlement.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.4
• /
• pp.581-587
• /
• 2013

In a magnetic train set composed of more than two cars, the installation of dampers between cars is carefully considered for improving both the ride quality and the safety, particularly during curve negotiation. In this study, a dynamic simulation of the ride quality and curve negotiation of a Maglev vehicle was carried out. The dynamic model is developed based on multibody dynamics. The presented full vehicle multibody dynamic model integrates the electromagnet model and its control algorithm. By using this model, the effects of the dampers are numerically analyzed. The proposed damper is installed on the vehicle and tested to analyze its effects. In this study, the simulation and measured results of the vehicle behavior and ride quality are discussed.

• The Journal of Dong Guk Oriental Medicine
• /
• v.7 no.1
• /
• pp.33-41
• /
• 1998

Lymph node tissues of BALB/C mouse treated with DNCB were immunohistochemically observed to investigate the activation of cell mediated immunity in lymph node of murine with allergic contact dermatitis. The inguinal region of BALB/C mice were sensitized by one application of $25{\mu}l$ of 5% 2,4-dinitrochlorobenzene(DNCB) onto an abdominal skin and 2 weeks later, the mice were challenged with $4{\mu}l$ of 2.5% DNCB. The inguinal lymph node were obtained at hour 24, 48, and 72 after 2nd DNCB treatment and embedded with paraffin, and then stained by following ABC method that used monoclonal antibody including L3T4(CD4), Ly2(CD8), IL-2R(CD25). The distribution of helper T lymphocytes, cytotoxic T lymphocytes and IL-2 receptors began to increase at hour 24 after after 2nd DNCB treatment and these increase appeared in paracortical area and medullary sinius. These increase were greatest at hour 48. These results indicated that the IL-2 secretion began to increase by activation of helper T lymphocytes in lymph node of DNCB re-exposure area and subsequently to activate suppress T lymphocytes.

• Tribology and Lubricants
• /
• v.28 no.1
• /
• pp.19-26
• /
• 2012

Rolling contact fatigue of an urban railway wheel was analysed during its rolling. A FEM analysis was performed using a 3D modelling of rail and wheel, considering the slope of the rail and nonlinear isotropic and kinematic hardening behavior of the rail and the wheel. The maximum von-Mises stress and contact pressure between the rail and wheel were 656.9 MPa and 1111.4 MPa, respectively, under axial load of 85 kN with friction coefficient of 0. The fatigue initiation life prediction relationships by strain-lifetime (${\varepsilon}$-N) and Smith-Watson-Topper method were drawn for the wheel steel as follows: $N_i=7.35{\times}10^6{\times}SWT^{-3.56}$ and $N_i=5.41{\times}10^{-9}{\times}(\frac{{\Delta}{\varepsilon}}{2})^{-5.77}$. The fatigue lifetimes of the wheel due to rolling contact were determined to be infinite by ${\varepsilon}$-N and SWT methods.

• Tribology and Lubricants
• /
• v.32 no.1
• /
• pp.9-17
• /
• 2016

Contact between solid surfaces is one of the most important factors that influence dynamic behavior in micro/nanoscale. Although numerous theories and experimental results on contact behavior have been proposed, a thorough investigation for nanomaterials is still not available owing to technical difficulties. Therefore, molecular dynamics simulation was performed to investigate the contact behavior of nanomaterials, and the application of conventional contact theories to nanoscale was assessed in this work. Particularly, the contact characteristics of cylindrical nanowires were examined via simulation and contact theories. For theoretical analysis, various contact models were utilized and work of adhesion, Hamaker constant and elastic modulus those are required for calculation of the models were obtained from both indentation simulation and tensile simulation. The contact area of the cylindrical nanowire was assessed directly through molecular dynamics simulation and compared with the results obtained from the theories. Determination of the contact area of the nanowires was carried out via simulation by counting each atom, which is within the equilibrium length. The results of the simulation and theoretical calculations were compared, and it was estimated that the discrepancy in the results calculated between the simulation and the theories was less than 10 except in the case of the smallest nanowires. As the result, it was revealed that contact models can be effectively utilized to assess the contact area of nanomaterials.

• Pediatric Infection and Vaccine
• /
• v.22 no.1
• /
• pp.7-15
• /
• 2015

Purpose: The purpose of this study is to investigate secondary infections within the households of newly diagnosed tuberculosis patients. Methods: We collected data on household infections of tuberculosis patients by retrospective review of medical records and telephone surveys. Results: Out of 321 newly diagnosed tuberculosis cases, a total of 253 patients who received telephone surveys were enrolled in this study. Less than 50% of the patients had household contacts screened for tuberculosis infection, and most of the patients were not aware of the necessity of testing. Out of 562 household contacts, there were 8 cases of secondary tuberculosis (1.4%, 8/562) in 7 households. There were 15 cases of latent infection (2.7%, 15/562) in 13 households. Out of 110 child and adolescent household contacts, there were no cases of secondary tuberculosis, and there were 8 cases of latent infection (7.3%) in 7 households, which was 20.5% among child and adolescent contacts screened for tuberculosis infection. In 3 of the cases (13.0%) that had secondary tuberculosis or latent infection in their households, the source of infection was extrapulmonary tuberculosis. There was no correlation between the frequency of household infections and the presence of pulmonary cavities, sputum AFB smear results, and microbiologically confirmed results. Conclusions: For effective investigation of tuberculosis contacts, it is necessary to raise general awareness on the necessity of investigating household contacts, and there should also be a continued assessment on tuberculosis contact investigation since government-supported programs.