Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Dynamic Analysis of Rotor Systems Considering Ball Bearing Contact Mechanism

볼 베어링의 접촉 메커니즘을 고려한 회전체 시스템의 동적 해석

  • Kim, YoungJin (Dept. of Mechanical Engineering, Chungnam Nat'l Univ.) ;
  • Lee, Jongmahn (Dept. of Mechanical Engineering, Chungnam Nat'l Univ.) ;
  • Oh, Dongho (Dept. of Mechanical Engineering, Chungnam Nat'l Univ.)
  • 김영진 (충남대학교 공과대학 기계공학과) ;
  • 이종만 (충남대학교 공과대학 기계공학과) ;
  • 오동호 (충남대학교 공과대학 기계공학과)
  • Received : 2013.10.09
  • Accepted : 2013.11.15
  • Published : 2013.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

We propose a finite element modeling method considering the ball bearing contact mechanism, and the developed method was verified through experimental and analytical results of inner and outer race-type rotor systems. A comparison of the proposed method with conventional method reveals that there is little difference in the results of the inner race-type rotor system, but there are considerable differences in the results of the outer race-type rotor system such that predictions of greater accuracy can be made. Therefore, the proposed method can be used for accurately predicting the dynamic characteristics of an outer race-type rotary machine.

본 논문에서는 볼 베어링의 접촉 메커니즘이 고려된 유한요소 모델링 방법을 제안 하였으며 내륜형과 외륜형 회전체의 해석과 실험을 통하여 검증하였다. 그 결과 제안된 방법은 내륜 회전형일 경우 차이가 적지만 외륜 회전형일 경우 회전부와 지지부의 연성으로 인하여 기존 방법보다 더 정확히 예측함을 확인하였고 향후 외륜 회전형 기기의 동특성을 정확히 예측하는데 활용될 수 있다.

Keywords

References

  1. Kim, W.D., 1993, "Effect of Misalignment on The Fatigue Life of Ball Bearing", Ph.D. Dissertation, Seoul National University.
  2. Tedric, A. H. and Michael, N. K., 2007, "Rolling Bearing Analysis," Fifth Edition, Talyor & Francis, USA
  3. Chen, J. S. and Hwang, Y., 2006, "Centrifugal Force Induced Dynamics of a Motorized High-Speed Spindle," Int. J. Adv. Manuf. Technol, Vol. 30, No. 1-2, pp. 10-19 https://doi.org/10.1007/s00170-005-0032-y
  4. Jedrzejewski, J. and Kwasny, W., 2010, "Modeling of Angular Contact Ball Bearings and Axial Displacements for High-Speed Spindles," CIRP Annuals-Manufacturing Technology, Vol. 59, pp. 377-382. https://doi.org/10.1016/j.cirp.2010.03.026
  5. N. Akturk, "Dynamics of A Rigid Shaft Supported by Angular Contact Ball Bearing," Ph.D. Thesis, Imperial College of Science, Technology and Medicine, London, UK., 1993.

Cited by

  1. vol.17, pp.2, 2014, https://doi.org/10.5293/kfma.2014.17.2.073
  2. Dynamic Analysis of Magnetic Disk Drive Actuators According to Temperature Variation pp.1941-0069, 2016, https://doi.org/10.1109/TMAG.2016.2626781