• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.329-335
• /
• 2018

Satellite images, which are widely used in various applications, are very useful for monitoring the surface of the earth. Since satellite data is obtained from a remote sensor, it contains a lot of noise and errors depending on observation weather conditions during data acquisition and sensor malfunction status. Since the accuracy of the data affects the accuracy and reliability of the data analysis results, noise removal and data restoration for high quality data is important. In this study, we propose a reconstruction system that models the time dependent dynamic characteristics of satellite data using a multi-period harmonic model and performs adaptive data restoration considering the spatial correlation of data. The proposed method is a real-time restoration method and thus can be employed as a preprocessing algorithm for real-time reconstruction of satellite data. The proposed method was evaluated with both simulated data and MODIS NDVI data for six years from 2011 to 2016. Experimental results show that the proposed method has the potentiality for reconstructing high quality satellite data.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.370-374
• /
• 2006

Ad-hoc 환경의 응용은 재난구조나 회의실 또는 강의실에서의 정보 교환과 같은 그룹 통에서 이용된다. Ad-hoc 환경은 무선 채널을 이용하므로 상대적인 낮은 대역폭과 높은 오류 발생률을 가지게 된다. 따라서 Ad-hoc 네트워크에서는 신뢰적인 전송이 요구된다. 이동 노드는 상대적으로 낮은 성능과 에너지의 제한으로 인해 유선 환경과 같은 신뢰적인 전송 기법을 Ad-hoc 환경에 적용하기에는 문제가 발생한다. Ad-hoc 환경의 무선 채널이 가지는 보안적인 취약성과 높은 에러율을 극복하는 신뢰적인 그룹 키 전송을 위한 재전송 기법을 제안한다. 신뢰적인 트리 형성하기 위해 n차 트리 구조를 이용한다. 손실 감지를 위한 ACK 메시지를 이용하고 손실 복구를 위한 재전송 기법에 대해 연구를 한다. 제안한 신뢰적인 그룹 키 전송을 위한 재전송 기법은 트리의 깊이의 차수가 루트 관리 노드, 서브 관리 노드와 로컬 멤버 노드로 구성되기 때문에 손실 감지와 손실 복구에 대한 연산의 오버헤드가 적다. 루트 관리 노드는 멤버 노드로부터 받은 개인키 정보를 이용하여 그룹 키를 생성하고 그룹 키 부분 정보를 서브 관리 노드에게 전송하고 서브 관리 노드에 대한 신뢰성을 책임진다. 서브 관리 노드는 루트 관리 노드로부터 받은 그룹 키 부분 정보를 로컬 멤버 노드에게 전송하고 로컬 멤버 노드에 대한 신뢰성을 책임진다. 루트 관리 노드와 서브 관리 노드를 관리 노드라 한다. 관리 노드가 신뢰적인 전송을 위해 관리하는 멤버 노드는 전체 그룹에 독립적으로 유지 가능하므로 확장성 및 효율성이 좋다. 관리 노드는 동적인 그룹에 따른 타이머를 설정함으로써 손실 감지에 대한 시간을 줄임으로써 효율적인 손실 감지 및 손실 복구를 한다. 임계값 설정으로 인한 중복 수신에 대한 오버헤드를 줄일 수 있다.신뢰성을 향상 시킬 수 있는 Load Balancing System을 제안한다.할 때 가장 효과적인 라우팅 프로토콜이라고 할 수 있다.iRNA 상의 의존관계를 분석할 수 있었다.수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수 있었다. 그러므로 $^{99m}Tc$-transierrin이 감염 병소의 영상진단에 사용될 수 있을 것으로 기대된다.리를 정량화 하였다. 특히 선조체에서의 도파민 유리에 의한 수용체 결합능의 감소는 흡연에 의한 혈중 니코틴의 축

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.4 s.74
• /
• pp.389-398
• /
• 2006

Structural optimization design has been developed with finite element analysis using effective and fast computational technology. Especially topology optimization design has been recently often used since it yields an optimal topology as well as an optimal shape under satisfied constraints. In general in finite element analysis, it is assumed that the structural material properties such as Young's modulus and Poisson's ratio and the variable of applied loading are fixed with obvious values in structure. However practically these values may take uncertainties because of environmental effect or manufactural error of structures. Therefore static or dynamic analysis of the structures may make an error, then finally it may have an influence on qualify of optimal design. In this study, the topology optimization design of structure is carried out using so called the interval finite element method, and the analysis method Is proposed. The results are also validated by comparing with conventional topology optimization results of density distribution method and finite element analysis results. The present method can be used to predict the optimal topology of linear elastostatic structures with respect to structural uncertainty of behavior.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.4 s.310
• /
• pp.74-86
• /
• 2006

This paper proposes a robust and computationally efficient algorithm for automatic video object segmentation. For implementing the spatio-temporal segmentation, which aims for efficient combination of the motion segmentation and the color segmentation, an SOM-based hierarchical clustering method in which the segmentation process is regarded as clustering of feature vectors is employed. As results, problems of high computational complexity which required for obtaining exact segmentation results in conventional video object segmentation methods, and the performance degradation due to noise are significantly reduced. A measure of motion vector reliability which employs MRF-based MAP estimation scheme has been introduced to minimize the influence from the motion estimation error. In addition, a noise elimination scheme based on the motion reliability histogram and a clustering validity index for automatically identifying the number of objects in the scene have been applied. A cross projection method for effective object tracking and a dynamic memory to maintain temporal coherency have been introduced as well. A set of experiments has been conducted over several video sequences to evaluate the proposed algorithm, and the efficiency in terms of computational complexity, robustness from noise, and higher segmentation accuracy of the proposed algorithm have been proved.

• The KIPS Transactions:PartD
• /
• v.14D no.2
• /
• pp.265-272
• /
• 2007

In this paper, we implement an automated composition system of web services using hybrid techniques that merge the benefit of BPEL techniques, with the advantage of OWL-S, BPEL techniques have practical capabilities that fulfil the needs of the business environment such as fault handling and transaction management. However, the main shortcoming of these techniques is the static composition approach, where the service selection and flow management are done a priori and manually. In contrast, OWL-S techniques use ontologies to provide a mechanism to describe the web services functionality in machine-understandable form, making it possible to discover, and integrate web services automatically. This allows for the dynamic integration of compatible web services, possibly discovered at run time, into the composition schema. However, the development of these approaches is still in its infancy and has been largely detached from the BPEL composition effort. In this work, we describe the design of the SemanticBPEL architecture that is a hybrid system of BPEL4WS and OWL-S, and propose algorithms for web service search and integration. In particular, the SemanticBPEL has been implemented based on the open source tools. The proposed system is compared with existing BPEL systems by functional analysis. These comparisions show that our system outperforms existing systems.

• Korean Chemical Engineering Research
• /
• v.45 no.1
• /
• pp.73-80
• /
• 2007

This article aims to optimize the nitrogen removal of a sequencing batch reactor (SBR) through the use of the activated sludge model and iterative dynamic programming (IDP). Using a minimum batch time and a maximum nitrogen removal for minimum energy consumption, a performance index is developed on the basis of minimum area criteria for SBR optimization. Choosing area as the performance index makes the optimization problem simpler and a proper weighting in the performance index makes it possible to solve minimum time and energy problem of SBR simultaneously. The optimized results show that the optimal set-point of dissolved oxygen affects both the total batch time and total energy cost. For two different influent loadings, IDP-based SBR optimizations suggest each supervisory control of batch scheduling and set-point trajectory of dissolved oxygen (DO) concentration, and can save 20% of the total energy cost, while meeting the treatment requirements of COD and nitrogen. Moreover, it shows that the re-optimization of IDP within a batch can solve the modelling error problem due to the influent loading changes, or the process faults.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.357-364
• /
• 2014

The first mission for the IoT based hyper-connectivity communication is developing a device-to-device communication technique in infra-less low-power and lossy networks. In a low-power and lossy wireless network, IoT devices and routers cannot keep the original path toward the destination since they have the limited memory. Different from the previous light-weight routing protocols focusing on the reduction of the control messages, the proposed scheme provides the light-weight IPv6 address auto-configuration, IPv6 neighbor discovery and routing protocol in a IoT capable infra-less wireless networks with the bloom filer and enhanced rank concepts. And for the first time we evaluate our proposed scheme based on the modeling of various probability distributions in the IoT environments with the lossy wireless link. Specifically, the proposed enhanced RPL based light-weight routing protocol improves the robustness with the multi-paths locally established based on the enhanced rank concepts even though lossy wireless links are existed. We showed the improvements of the proposed scheme up to 40% than the RPL based protocol.

• Journal of the Korea Convergence Society
• /
• v.12 no.1
• /
• pp.99-104
• /
• 2021

In this paper, we propose health risk management using feature extraction and cluster analysis considering time flow. The proposed method proceeds in three steps. The first is the pre-processing and feature extraction step. It collects user's lifelog using a wearable device, removes incomplete data, errors, noise, and contradictory data, and processes missing values. Then, for feature extraction, important variables are selected through principal component analysis, and data similar to the relationship between the data are classified through correlation coefficient and covariance. In order to analyze the features extracted from the lifelog, dynamic clustering is performed through the K-means algorithm in consideration of the passage of time. The new data is clustered through the similarity distance measurement method based on the increment of the sum of squared errors. Next is to extract information about the cluster by considering the passage of time. Therefore, using the health decision-making system through feature clusters, risks able to managed through factors such as physical characteristics, lifestyle habits, disease status, health care event occurrence risk, and predictability. The performance evaluation compares the proposed method using Precision, Recall, and F-measure with the fuzzy and kernel-based clustering. As a result of the evaluation, the proposed method is excellently evaluated. Therefore, through the proposed method, it is possible to accurately predict and appropriately manage the user's potential health risk by using the similarity with the patient.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.2
• /
• pp.305-312
• /
• 2014

Purpose : The purpose of this study is to analyze the mechanical and leaf speed accuracy of the dynamic multileaf collimator (DMLC) and determine the appropriate period of quality assurance (QA). Materials and Methods : The quality assurance of the DMLC equipped with Millennium 120 leaves has been performed total 92 times from January 2012 to June 2014. The the accuracy of leaf position and isocenter coincidence for MLC were checked using the graph paper and Gafchromic EBT film, respectively. The stability of leaf speed was verified using a test file requiring the leaves to reach maximum leaf speed during the gantry rotation. At the end of every leaf speed QA, dynamic dynalog files created by MLC controller were analyzed using dynalog file viewer software. This file concludes the information about the planned versus actual position for all leaves and provides error RMS (root-mean square) for individual leaf deviations and error histogram for all leaf deviations. In this study, the data obtained from the leaf speed QA were used to screen the performance degradation of leaf speed and determine the need for motor replacement. Results : The leaf position accuracy and isocenteric coincidence of MLC was observed within a tolerance range recommanded from TG-142 reports. Total number of motor replacement were 56 motors over whole QA period. For all motors replaced from QA, gradually increased patterns of error RMS values were much more than suddenly increased patterns of error RMS values. Average error RMS values of gradually and suddenly increased patterns were 0.298 cm and 0.273 cm, respectively. However, The average error RMS values were within 0.35 cm recommended by the vendor, motors were replaced according to the criteria of no counts with misplacement > 1 cm. On average, motor replacement for gradually increased patterns of error RMS values 22 days. 28 motors were replaced regardless of the leaf speed QA. Conclusion : This study performed the periodic MLC QA for analyzing the mechanical and leaf speed accuracy of the dynamic multileaf collimator (DMLC). The leaf position accuracy and isocenteric coincidence showed whthin of MLC evaluation is observed within the tolerance value recommanded by TG-142 report. Based on the result obtained from leaf speed QA, we have concluded that QA protocol of leaf speed for DMLC was performed at least bimonthly in order to screen the performance of leaf speed. The periodic QA protocol can help to ensure for delivering accurate IMRT treatment to patients maintaining the performance of leaf speed.