• Proceedings of the Optical Society of Korea Conference
• /
• 2005.02a
• /
• pp.322-323
• /
• 2005

• Proceedings of the Optical Society of Korea Conference
• /
• 1996.09a
• /
• pp.48-48
• /
• 1996

• Journal of the Korean Magnetics Society
• /
• v.5 no.6
• /
• pp.963-967
• /
• 1995

Ultra thin layers of NiFeCo or NiFe were inserted at the interfaces of Ni and Cu to form a multilayer structure. In case of inserting a NiFe layer, the magnetoresistance was about 6%, the saturation magnetic field was 50 Oe and the hysteresis of R-H (resistance-magnetic field) was very small. In case of inserting a NiFeCo layer, the magnetoresistance increased to about 7% but the saturation magnetic field and hysteresis were also increased. The increase of the output under biased magnetic field was much larger in case of inserting a NiFe layer because of relatively smaller hysteresis in R-H behavior.

• Journal of KSNVE
• /
• v.6 no.6
• /
• pp.827-834
• /
• 1996

The effect of pipe breaks in the secondary side is investigated as a part of the fuel assembly qualification program. Using the detailed dynamic analysis of a reactor core, peak responses for the motions induced from pipe breaks are obtained for a detailed core model. The secondary side pipe breaks such as main steam line and economizer feedwater line braksare considered because leak-before-break methodology has provided a technical basis for the elimination of double ended guillotine breaks of all high energy piping systems with a diameter of 10 inches or over in the primary side from the design basis. The dynamic responses such as fuel assembly shear force, bending moment, axial force and displacement, and spacer grid impact loads are carefully investigated. Also, the stress analysis is performed and the effect of the secondary side pipe breaks on the fuel assembly structural integrity under the faulted condition is addressed.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.254-260
• /
• 2000

The spacer grid is one of the main structural components in fuel assembly, which supports the fuel rods, guides cooling water, and protects the fuel assembly from the external impact load such as earthquakes. The nonlinear dynamic impact analysis is conducted by using the finite element code ABAQUS/Explicit. Boundary condition for dynamic analysis is well applied to the test condition. Simulation results also similarly predict the local buckling phenomena. In addition to the buckling parameter, the local buckling cause is examined by both simulation and test method. It is found to correspond well with the test results. Impact tests are also carried out for some specimens of the spacer grid in order to compare the results between the test and the simulation. This test is accomplished by a free fall dummy weight onto the specimen. From this test, only the uppermost and lowermost layers of the multi-cell are buckled, which implies the local buckling at the weakest point of the grid structure.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.5
• /
• pp.385-393
• /
• 2018

In this study, the analysis of 2DOF (2 Degree Of Freedom) motion and added resistance of a ship in regular head waves is carried out using RANS (Reynolds Averaged Navier-Stokes) approach. In order to improve the accuracy for large amplitude motions, the dynamic overset scheme is adopted. One of the dynamic overset schemes, Suggar++ is applied to WAVIS which is the in-house RANS code of KRISO (Korea Research Institute of Ships and Ocean Engineering). The grid convergence test is carried out using the present scheme before the analysis. The target hull form is KRISO VLCC tanker (KVLCC2) and 13 wave length conditions are applied. The present scheme shows the improved results comparing with the results of WAVIS2 in the non-inertial reference frame. The dynamic overset scheme is confirmed to give the comparatively better results for the large amplitude motion cases than the non-inertial frame based scheme.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.591-595
• /
• 2017

Numerical simulations were carried out to analyze thermo-fluid dynamic and missile-motion performance by using two-phase flow model and dynamic grid system. To analyze the interaction among the hot gas, coolant, and mixture flow, Realizable $k-{\varepsilon}$ turbulence and VOF(Volume Of Fluid) model were chosen and a parametric study was performed with the change of coolant flow rate. As a result of the analysis, pressure of the canister showed a large difference depending on the presence or absence of the coolant, and also showed a dependancy on the amount of coolant. Velocity and acceleration were dependent on the canister pressure.

• Journal of the Korea Computer Graphics Society
• /
• v.12 no.4
• /
• pp.7-15
• /
• 2006

The ultimate objective of painterly rendering is to express an inputted image as if it is hand drawn. The factors to express this painterly effect are thickness of the brush, direction, texture and the establishment of criteria judging if the produced brush will be drawn on to the canvas. In this paper, the algorithm using density of the edges in determining the criteria whether the brush will be drawn onto the canvas is proposed. Density of edges refers to the quantity of edge in the specific area. And uses the method of finding the location of the brush to be drawn as a unit of dynamic grid as well as expressing consistent directional through direction interpolation. Also, the texture is expressed using various textured brushes. Considering density of edges,We can express detailed area and abstract area. And it result in more human effect of oil painting.

• The Journal of the Korea Contents Association
• /
• v.19 no.3
• /
• pp.72-79
• /
• 2019

Autonomous locomotion has two essential functionalities: mapping builds and updates maps by uncertain position information and measured sensor inputs, and localization is to find the positional information with the inaccurate map and the sensor information. In addition, obstacle detection, avoidance, and path designs are necessarily required for autonomous locomotion by combining the probabilistic methods based on uncertain locations. The sensory inputs, which are measured by a metric-based scanner, have difficulties of distinguishing moving obstacles like humans from static objects like walls in given environments. This paper proposes the low resolution grid map combined with reinforcement learning, which is compared with the conventional recognition method for detecting static and moving objects to generate obstacle avoiding path. Finally, the proposed method is verified with experimental results.

• Journal of KIISE:Software and Applications
• /
• v.26 no.11
• /
• pp.1306-1313
• /
• 1999

본 연구는 인터넷 기반 공유가상공간에서 시스템의 확장성을 유지하기 위하여 이동객체를 대상으로 하는 이벤트 필터링 기법을 제안하고자 한다. 제안된 다중격자 모델 기법은 이동객체의 경로 상에서 대표적인 이벤트를 샘플링하는 방식을 사용한다. 이 방식은 메시지 트래픽의 양을 동적으로 조절하기 위하여 이동객체 간의 관심정도 정보를 수치적으로 변환하여 이벤트 갱신빈도에 반영한다. 대량의 이동객체를 생성하여 제안된 기법을 적용한 성능평가 실험에서 기존의 방식에 비하여 평균 메시지 전송량이 50%이상 감소하는 것으로 확인할 수 있었다. 다중격자 모델은 참여자의 수와 메시지 트래픽 상황에 따라 가상환경의 공유 QoS를 동적으로 조절할 수 있으며, 인터넷 상에서 다수 사용자를 위한 3차원 가상사회 구축 및 온라인 네트워크 게임 개발 등에 활용될 수 있을 것이다.Abstract This paper proposes an event filtering technique that can dynamically control a large amount of event messages produced by moving objects like avatars or autonomous objects in a distributed virtual environment. The proposed multi-level grid model technique uses the method that extracts the representative events from the paths of moving objects. For dynamic control of message traffics, this technique digitizes the DOIs of the avatars and reflects the interest information controlling the frequency of message transmission. For the performance evaluation, a large number of moving objects were created and the model was applied to these avatar groups. In the experiments, more than 50% of messages have been reduced in comparison with the existing AOI-based filtering techniques. The proposed technique can dynamically control the QoS in proportion to the number of users and the amount of messages where a large number of users share a virtual space. This model can be applied to the development of 3D collaborative virtual societies and multi-user online games in the Internet.