• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.6
• /
• pp.67-74
• /
• 2010

Because of the difference between the actual and computed eccentricity of buildings, symmetrical buildings will be affected by torsion. In provisions, accidental eccentricity is intended to cover the effect of several factors, such as unfavorable distributions of dead- and live-load masses and the rotational component of ground motion about a vertical axis. The torsional amplification factor is introduced to reduce the vulnerability of torsionally imbalanced buildings. The effect of the torsional amplification factor is observed for a symmetric rectangular building with various aspect ratios, where the seismic-force-resisting elements are positioned at a variable distance from the geometrical center in each direction. For verifying the torsional amplification factor in provisions, nonlinear reinforced concrete models with various eccentricities and aspect ratios are used in rock. The difference between the maximum displacements of the flexible edge obtained between using nonlinear static and time-history analysis is very small but the difference between the maximum torsional angles is large.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.7
• /
• pp.13-20
• /
• 2005

For experimental study on the effect of particle size distribution on the liquefaction resistance strength, particle size distribution curves of the dredged soil were investigated. In this process, four mean particle sizes and three uniformity coefficients were defined representatively and twelve representative particle size distribution curves which have different mean particle size and uniformity coefficient, were defined and manufactured by using the real dredged river soil. Cyclic triaxial tests and resonant column tests were carried out to analyze the effect of mean particle size and uniformity coefficient on the liquefaction resistance strength and dynamic characteristics.

• Geotechnical Engineering
• /
• v.11 no.1
• /
• pp.101-112
• /
• 1995

Deformational characteristics of soils, often expressed in terms of shear modulus and material damping ratios, are important parameters in the design of soil-structure systems subjected to cyclic and dynamic loadings. In this paper, deformational characteristics of dry sand at small to intermediate strains were investigated using resonant column/torsional shear(RC 175) apparatus. Both resonant column(dynamic) and torsional shear (cyclic) tests were performed in a sequential series on the same specimen. With the modification of motion monitoring system, the elastic zone, where the stress strain relationship is independent of loading cycles and strain amplitude, was veri tied and hysteretic damping was found even in this zone. At strains above cyclic threshold, shear modulus increases and damping ratio decreases with increasing number of loading cycles. Moduli and damping ratios of dry sand are independent of loading frequency and values obtained from pseudostatic torsional shear tests are Identical with the values from the dynamic resonant column test, provided the effect of number of loading cycles is considered in the conlparison. Therefore, deformational characteristics determined by RC/TS tests may be applied in both dynamic and static analyses of soil-structure systems.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.105-113
• /
• 2018

The proposed model to predict the bridge load carrying capacity uses the impact response spectrum. The spectrum is based on Euler-Bernoulli beam and the center of the bridge width for the moving load location. Therefore, it is necessary to investigate the eccentric moving load effects on the impact factor and response factor. For this, this study considers 10 m width and two-lane simply supported slab bridges and performs the moving load analysis to investigate the variations of peak impact factor and corresponding response factor. The numerical results show that the eccentric load increases both the static and dynamic displacements, but the impact factor is decreased since the incremental amount of static displacement is bigger than that of dynamic displacement. However, the difference of the impact factors between the center and eccentric loadings is small showing less than 0.5%p. In the response factor, the eccentric loading increases both the static and dynamic response factors, compared to the center loading. The difference of the response factor is only 0.18%p. It shows that the eccentric loading has very small effects on the response factor, thus the impact factor response spectrum which is generated based on the center moving load can be used to determine the response factor.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.286-286
• /
• 2016

기후변화를 고려한 위한 미래 수자원 계획은 신뢰성 있는 수문기상인자의 산정을 통한 수자원 영향 평가 결과로 수립되는 것이 중요하다. 본 연구에서는 DHSVM모형과 TOPLATS모형에서 생산된 결과를 가지고 제약조건을 가지는 다중선형회귀 모형을 통하여 2012년-2014년 동안의 한반도 유역에 대한 수문기상인자를 산정하였다(Fig. 1). 다중선형회귀 모형은 하나의 종속변수의 변화를 설명하기 위하여 두 개 이상의 독립변수를 사용하는 모형으로 일반적으로 다중선형회귀 모형의 회귀 계수는 음의 값을 가질 수 있으므로 본 연구의 적용을 위하여 검정지점에 대하여 산정된 음의 회귀계수 값이 그대로 적용될 경우 적합하지 않으므로 회귀 계수에 제약조건을 부여하였다. 제한된 회귀 계수의 범위는 0-1사이를 가진다. 동적 다중선형 모형의 구성은 광릉 GCK, GDK 지점자료를 활용하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.58-61
• /
• 1994

본 연구에서는 내부 외부 진동원(8-30Hz)에 따른 격자보 구조의 동적 응답을 효과적으로 제어하기 위해 격자보 구조의 동적 거동에 지배적인 영향을 미치는 철근비, 질량, 탄성계수 등 여러 인자들의 비교, 분석을 통해 동적 거동에 영향을 미치는 인자를 분석함으로써 격자보 구조의 설계시 인자의 변화에 따른 동적 거동 특성을 예측하여 이에 적절히 대응할 수 있도록 도모하였다. 이를 위해 국내에 건설된 반도체 공장의 격자보 구조 중에서 기본 해석 모델을 결정하고 이에 대해 실험적 모드 해석과 유한 요소 해석을 사용해서 기본 해석 모델의 모드 매개변수를 구하고, 기본 해석 모델에 사용되는 각 인자가 고유 진동수에 미치는 영향을 비교.분석하였다.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.2
• /
• pp.65-71
• /
• 1991

본 연구는 CCA 처리재의 재건조(再乾燥)시 적용된 건조 스케쥴 (통상(通常) 열기건조(熱氣乾燥)와 고온건조(高溫乾燥) 스케쥴)이 처리재의 휨강도(强度) 성질에 미치는 영향을 고찰하고자 수행되었다. 탄성계수(彈性係數)(MOE), 그리고 비파괴시험(非破壞試驗)에 의해 얻어진 동적(動的) 탄성계수 (Dynamic MOE) 및 대수감쇠율(對數減衰率)(Logarithmic decrement) 은 처리후 재건조에 의해 큰 영향을 받지 않았다. 반면에 적용된 건조 스케쥴에 관계없이 재건조시 심각한 파괴계수(破壞係數)(MOR)의 감소가 파괴계수 분포의 모든 영역에서 초래되었다. 그러나 통상 열기건조(최대 건구온도=$71^{\circ}C$)와 고온건조(건구온도=$110^{\circ}C$) 서로간에는 감소의 정도에 큰 차이가 없었다. 따라서, 처리재의 재건조사 심각한 파괴계수의 감소가 용인(容認)되지 않는다면 CCA로 처리된 Lodgepole pine 각재의 재건조는 미국 연방 임산물 시험장의 Lodgepole pine의 통상 열기건조 스케쥴 (T9-C3) 보다 온화(溫和)한 조건으로 실시되어야 할 것이다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.2
• /
• pp.67-74
• /
• 2019

In this paper the response factor is investigated for middle and small size-RC slab aged bridges. The response factor consists of static and dynamic response factors and is a main parameter in the frequency based-bridge load carrying capacity prediction model. Static and dynamic response factors are determined based on the frequency variation and the impact factor variation respectively between current and previous (or design) states of bridges. Here, the impact factor variation is figured out using the impact factor response spectrum which provides the impact factor according to the natural frequency of bridges. In this study, four actual RC slab bridges aged over 30 years after construction are considered and their span length is 12m. The dynamic loading test in field using a dump truck and eigenvalue analysis with FE models are conducted to identify the current and previous (or design) state-natural frequencies of the bridges, respectively. For more realistic considerations in the moving loading situation, the impact factor response spectrum is developed based on tri-axle moving loads representing the dump truck load distribution and various supporting conditions such as simply supported and both ends fixed conditions. From the results, the response factor is widely ranged from 0.21to 0.91, showing that the static response factor contributes significantly on the results while the dynamic response factor has a small effect on the result. Compared to the results obtained from the impact factor response spectrum based on the single axle-simply supported condition, the maximum percentage difference of the response factors is below 3.2% only.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.3
• /
• pp.11-21
• /
• 2000

구조물에 내진설계를 적용하는 목적은 지진에 노출되는 구조물에 안전성과 경제성을 고려한 파괴메카니즘을 부여하는 것이다. 내진설계에 보편적으로 적용하고 있는 응답스펙트럼해석법은 선형해석법으로 구조물의 비선형 동적거동에 의한 영향은 특정 계수로 반영한다. 그러나 기존의 내진설계시방서들이 강진지역에 있는 나라들에 의해 제정 및 개정되어 왔기 때문에 응답스펙트럼 해석법 뿐만 아니라 기타의 적용규정이 강진지역에 위치한 구조물의 상황만을 고려하여 제시되었다. 따라서 중약진지역에 위치한 구조물의 내진설계에 대한 별도의 연구가 요구되고 있다. 이 연구에서는 중약진지역에 위치한 콘크리트 교량을 선정하여 비선형 동적거동을 반영하는 계수를 결정하고 응답스펙트럼 해석법을 적용하였다. 연구 결과 바탕으로 중약진지역의 교량에 대해 내진설계의 목적을 만족하는 개선된 내진설계 절차를 제시하였다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.861-874
• /
• 2019

A great interest in the seismic performance evaluation of small size tunnel structures such as utility tunnel has been taken since recent earthquakes at Pohang and Gyeongju in Korea. In this study, the three-dimensional dynamic analyses of vertical shaft and horizontal tunnel under seismic load were carried out using FLAC3D. Especially, parametric analyses was performed to investigate the effects of interfacial stiffness on interfacial behavior between soil and structure. The parametric analysis showed that the interfacial stiffness scarcely gave an effect on the global dynamic behavior of the structure, while had a significant effect on the local displacement behavior of the connections. The magnitude of the interfacial stiffness was inversely proportional to the displacement, while the magnitude of interface stiffness was proportional to the normal and shear stresses. The results of this study suggest the limitations of the existing empirical equations for interfacial stiffness and emphasize the need to develop new interfacial stiffness models.