• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.5
• /
• pp.10-17
• /
• 2004

To achieve the advanced forward flight performance of helicopter, the passive control methods for enhancement of the dynamic stall characteristics of rotor blades are studied. To enhance the dynamic stall characteristics of the rotor blades, it is essential to improve the lift performance and the pitching moment performance simultaneously with the control of the separation on the rotor blades. For this point of view, both the fixed droop leading edge and the Gurney flap which are simply realized are used for control of the dynamic stall in severe dynamic stall conditions. From this study, the combination of both passive control methods showed dramatic enhancement of lift and pitching moment performance in dynamic stall than previous research results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.1
• /
• pp.11-19
• /
• 2005

In order to improve dynamic stall characteristics of an oscillating airfoil, optimal design has been performed for fixed nose droop and Gurney flap. Fixed nose droop is known to be very effective to improve pitching moment characteristics but may cause degeneration of aerodynamic lift at the same time. On the other hand, Gurney flap has the opposite characteristics. For fixed nose droop, location and angle are chosen as design variables, while length is defined as design variable for Gurney flap. Higher order response surface methodology and sensitivity based optimal design method are employed to handle highly nonlinear problem such as dynamic stall. Optimal design has been performed so that lift and pitching moment are simultaneously improved. The design results show that aerodynamic characteristics can be remarkably improved through present design approach and the present passive control method is as good as active control method which combines variable nose droop and Gurney flap.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.8
• /
• pp.10-20
• /
• 2002

The present paper investigates methods to control dynamic stall using an optimal approach. An unsteady aerodynamic sensitivity analysis code is developed by a direct differentiation method from a two-dimensional unsteady compressible Navier-Stokes solver including a two-equation turbulence model. Dynamic stall control is conducted by minimizing an objective function defined at an instant instead of integrating for a period of time. Unsteady sensitivity derivatives of the objective function are calculated by the sensitivity code, and optimization is carried out using a linear line search method at every physical time step. Numerous examples of dynamic stall control using control parameters such as nose radius, maximum thickness of airfoil, or suction show satisfactory results.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.61.1-61.1
• /
• 2011

풍력 터빈은 복잡한 바람 조건에 노출되어 운용 되는 시스템으로서 경제성과 신뢰성을 확보하기 위해서는 이러한 조건하에서 시스템에 작용하는 정확한 공력 하중 예측이 필요하다. 여러 조건 중에서도 요에러는 풍향이 수시로 바뀌기 때문에 피할 수 없는 비정상 유동 중에 하나이다. 본 연구에서는 이러한 요에러 발생시 공력 하중예측을 적절히 예측하기 위해서 와류 격자 기법을 기반으로 하는 비선형 와류 보정기법을 적용하였다. 비선형 와류 보정기법은 실속 이후의 공력 예측을 위해 기지의 공력 테이블을 이용하는 방법으로서 실속 이후의 공력 테이블 값의 양력과 와류 격자 기법에서의 양력 값이 일치하도록 순환(circulation)을 분포시키는 기법이다. 또한 요에러시에 발생할 수 있는 동적 실속을 계산하기 위해 Beddoes-Leishmen 동적 실속 모델을 비선형 와류 보정 기법에 적용하는 연구를 수행하였다. 요에러시 공력 하중 예측에 관한 수치해석 기법 연구의 적절성을 알아보기 위해 NREL-Phase VI Rotor 실험 결과와 비교 하였다. 그 결과 기존의 여타의 기법들과 비교하여 본 연구에서 제안한 기법의 적절성을 확인 할 수 있었다. 앞으로 본 연구를 바탕으로 다양한 비정상 공력 조건에 대한 풍력 블레이드의 공력 하중 해석에 대해 수행할 계획이다.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.37-39
• /
• 2010

Aerodynamic analysis was done for a fuselage and wing configuration of a mid-sized aircraft using 3-dimensional Navier-Stokes solver. Various turbulent models including a transitional SST were implemented to observe a dynamic stall as well as cruise characteristics. Also, different mesh moving methods were evaluated. Flow hysteresis which causes dynamic stall was investigated through flow field investigations.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.358-361
• /
• 2010

A Reynolds-Averaged Navier-Stokes (RANS) code with transition prediction model is developed and the computational results on an oscillating airfoil are compared with the experimental data for OA209 airfoil. An approximated eN method that can predict transition onset points and the length of transition region is directly applied to the RANS code. The hysteresis loop in dynamic stall is compared for the computational results using transition prediction and fully turbulent models with the experimental data. Results with transition prediction show more correlation with the experimental data than the fully turbulent computation.

• Journal of computational fluids engineering
• /
• v.19 no.1
• /
• pp.80-86
• /
• 2014

Numerical investigation on the dynamic stall over an oscillating airfoil is presented. A Reynolds-Averaged Navier-Stokes (RANS) equations are coupled with transition transport equations for the natural transition. Computational results considering the turbulent transition are compared with the fully turbulent computations and the experimental data. Results with transition prediction show closer correlation with the experimental data than those with the fully turbulent assumption, especially in the reattachment region.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.55-56
• /
• 2012

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.3 s.22
• /
• pp.116-123
• /
• 2005

An experimental investigation on the static and dynamic stall characteristics of elliptic airfoil was performed by PIV velocity field measurements. The flow Reynolds number was $3.13{\times}10^5$ and the reduced frequency of the pitch oscillation ranged from 0.075 to 0.125. The onset of static stall was caused by boundary layer separation which started at the trailing edge and progressed toward the leading edge. However, dynamic stall was caused by the vortex shed at the leading edge region and the flow field showed a vortex dominated flow with turbulent separation and alternate vortex shedding. The increase of reduced frequency increased the dynamic stall angle of attack and intensified the flow hysteresis in the down-stroke phase.

• Journal of computational fluids engineering
• /
• v.16 no.1
• /
• pp.48-52
• /
• 2011

Aerodynamic analysis was done for a fuselage and wing configuration of a mid-sized aircraft using unsteady 3-dimensional Navier-Stokes solver. Various turbulent models including a transitional SST were used to observe a dynamic stall as well as cruise characteristics. Also, different mesh moving methods were evaluated. Flow hysteresis which causes dynamic stall was investigated through flow field investigations.