• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.698-707
• /
• 2002

A review is presented of experimental studies on the strength performance of concrete exposed at short-term and rapid heating as in a fire and after cooling. Emphasis is placed on concretes with high original compressive strengths, that is, high-strength concrete(HSC). The compressive strength-temperature relationships from the reviewed test programs are distinguished by the test methods used in obtaining the data(unstressed, unstressed residual strength, and stressed tests) and by the aggregate types(normal or lightweight), The compressive strength properties of HSC vary differently with temperature than those of NSC. HSC have higher rates of strength loss than lower strength concrete in the temperature range of between 20$^{\circ}C$ to about 400$^{\circ}C$. These difference become less significant at temperatures above 400$^{\circ}C$ compressive strengths of HSC at 800$^{\circ}C$ decrease to about 30 ％ of the original room temperature strength. A comparison of lest results with current code provisions on the effects of elevated temperatures on concrete compressive strength and elastic modulus shows that the CEN Eurocodes and the CEB provisions are unconservative.

• 한국가스학회:학술대회논문집
• /
• 2003.10a
• /
• pp.65-72
• /
• 2003

현행 가스법상 지상식 LNG 저장탱크에 있어서 일정 용량의 저장탱크 주위에는 액상의 가스가 누출된 경우에 그 유출을 방지할 수 있는 방류둑(Dike) 또는 이와 동등 이상의 효과가 있는 시설을 설치하도록 규정하고 있어, 실제로 모든 지상식 LNG 저장탱크에 대해서 별도의 방류둑 설치를 의무화하고 있다. 또한, 예외규정으로 국제기준(international codes and standards)에 의해 설계되는 저장탱크는 심의를 통해 방류둑 기능을 인정할 수 있도록 하고 있다. 외국의 경우 LNG 저장탱크는 일반적으로 자국내 법령보다는 국제기준에 의해 건설됨으로써 1차 탱크로부터 일정거리의 둘레에 방류둑이 필요한 단일방호식 저장탱크 이외에 이중방호식, 완전방호식(full-containment) 및 멤브레인식(membrane) 저장탱크의 경우 외부(콘크리트, 강재)탱크가 방류둑 기능을 가지고 있어 별도의 방류둑이 필요없는 구조로 규정하고 있다. 멤브레인 LNG 저장탱크의 경우 프랑스, 일본 및 한국이 설계기술을 보유하고 있고, 최근 프랑스 및 한국에서 별도의 방류둑 없는 지상식 멤브레인 저장탱크 건설이 추진되고 있으나 양국 모두 자국법의 방류둑 규정에 의해 건설의 장애요소로 작용하고 있다. 따라서 지상식 멤브레인 LNG 저장탱크의 방류둑 기능에 대한 각 국의 법령 및 기준을 조사하고, 방류둑 일체형 저장탱크(완전방호식 및 멤브레인 저장탱크)의 형식별 안전성 평가 자료를 비교 검토함으로써 방류둑 일체형 멤브레인 저장탱크의 국내 도입의 타당성을 검토하고자 하였다. 조사결과 유럽, 미국 및 일본에서는 이중벽 LNG 저장탱크의 경우 콘크리트 외부탱크가 방류둑 기능을 가지는 것으로 규정하고 있으며, 특히 EN 1473과 제정중인 prEN 265002에서는 멤브레인 저장탱크의 경우 내부 멤브레인 탱크 누출시 단열시스템과 함께 외부 콘크리트 탱크가 액밀성 및 기밀성을 동시에 가지는 것으로 별도의 방류둑이 불필요함을 규정하고 있다. 프랑스 및 일본의 방류둑 일체형 LNG 저장탱크에 대한 위험성 평가 결과를 검토한 결과 멤브레인 저장탱크와 완정방호식 저장탱크는 안전성 차원에서 거의 동일한 것으로 나타났다. 따라서 국내에서 개발한 지상식 멤브레인 LNG 저장탱크 설계모델에 대한 안전성 제고 및 안전성 평가 등을 통해 객관적인 안전성 근거가 확보된다면 동 탱크의 경우에도 완전방호식 LNG 저장탱크와 같이 외부콘크리트 저장탱크의 방류둑 기능인정이 가능할 것으로 판단된다.

• Journal of Astronomy and Space Sciences
• /
• v.26 no.4
• /
• pp.677-692
• /
• 2009

In recent years, lots of studies on the planetary rover systems have been performed around space advanced agencies such as NASA, ESA, JAXA, etc. Among the various technologies for the planetary rover system, the mobility system, navigation algorithm, and scientific payload have been focused particularly. In this paper, the conceptual design for a ground-based model of planetary rover's mobility system to evaluate mobility and moving stability on ground is presented. The status of overseas research and development of the planetary rover systems is also addressed in terms of technical issues. And then, the requirements of the planetary rover's mobility system are derived by means of considering mobility and stability. The designed rover's mobility system has an active suspension with 6 legs that controls 6 joints on the each leg in order to achieve high stability and mobility. This kind of mobility system has already applied to the ATHELE of NASA for various purposes such as transportation and habitation for human lunar exploration activities in the near future (i.e., Constellation program). However, the proposed system has been designed by focusing on the small-sized unmanned explorations, which may be applied for the future Korea Lunar exploration missions. Therefore, we expect that this study will be an useful reference and experience in order to develop the planetary exploration rover system in Korea.

• The Korean Journal of Air & Space Law and Policy
• /
• v.20 no.2
• /
• pp.235-251
• /
• 2005

German working hour law of 1994(Arbeitszeitgesetz) provides maximum working hour as 8 hours a day and 48 hours per week. The law provides that minimum 11 hours rest-time is required between the end of a day's work and the beginning of the next day's work. Namely, the hour that the workers are put under commanding of the user is restricted within 13 hours per day. In the meantime, article 5, 7, 14, and 15 of the law have some letting the exceptional provisions regarding the working hour and rest-time of flight crew, and 2nd administrative order for the aviation transportation business owner, which is established based on such exceptional provisions(2.DV LuftBO), provides the working hour and rest-time of flight crew quite in detail. The administrative order is detailed quite regarding block time, flight working hour, and rest-time. So, it does not need to interpret additionally. Airlines in Korea should observe the both Labor Standard Act applying to general workers and Aviation Act focused on flight crew, so it is difficult that airlines manages working hour and rest-time of the flight crew efficiently. Therefore, it is desirable that our country refers to and considers adopting this legislation method of Germany which regulates working hour and rest-time of flight crew in detail in the 2.DV LuftBO.

• Journal of the Korea Concrete Institute
• /
• v.25 no.6
• /
• pp.657-665
• /
• 2013

The purpose of this study is the basic research of self-compacting concrete using Alkali-Activated Slag (AAS) binder in order to emphasize the durability of structures and facilitate casting the fresh concrete in field. The AAS binder emitted low carbon dioxide ($CO_2$) is eco friendly material of new concept because AAS products not only emit little $CO_2$ during production but also reuse the industrial by-products such as ground granulated blast-furnace slag (GGBS) of the steel mill. Until now, almost of domestic and foreign research are using Ordinary Portland Cement (OPC) for self-compacting concrete, and also, nonexistent research about AAS. The self-compacting concrete must get the performance of flowability, segregation resistance, filling and passing ability. Nine concrete mixes were prepared with the main parameter of unit amount of binder (400, 500, 600 $kg/m^3$) and 3 types of water-binder (W/B) ratio. The results of test were that fresh concretes were satisfied with flowability, segregation resistance, and filling ability of JSCE. But the passing ability was not meet the criteria of EFNARC because of higher viscosity of AAS paste than OPC. This high viscosity of AAS paste enables the manufacturing of self compacting concrete, segregation of which does not occur without the using of viscosity agent. It is necessary that the development of high fluidity AAS binders of higher strength and the study of better passing ability of AAS concrete mixes in order to use self compacting AAS concrete in field.

• Journal of Environmental Policy
• /
• v.13 no.4
• /
• pp.79-105
• /
• 2014

Natech risk is a type of complex disasters that natural hazards trigger technological disaster or industrial accidents. Research on Natech risk has been started from the mid-1990s in European countries and the Unites States, and drawn much more attention after the Fukushima nuclear accident caused by the 2011 East Japan earthquake. While early studies on Natech risk have focused on the causal natural hazards and possibility to occur, and the resulting spill of hazardous materials from the perspective of science and engineering, the recent research interests lie on effective Natech risk management. Especially, emphasizing the difference of Natech risk management from traditional disaster management, issues of uncertainty management, integration between natural disaster and technological disaster, and responsibility, has been drawn attention. In Korea, Natech risk has not been introduced as a research topic. Although some regulatory improvements have been made in nuclear safety and chemical Substance management after the Fukushima disaster, the potential impact of natural hazards in these areas has not been considered yet. It is necessary to raise the issues of Natech risk management in research and policy areas through active discussion and interdisciplinary approaches.

• Survey Research
• /
• v.9 no.2
• /
• pp.119-149
• /
• 2008

In this changing, complex modern society, as one-person households, dual income households and the elderly population increases and the survey environment gets worse, the past 'method' in which high costs and much time are needed, should face the environmental change. When considering the fact that developed countries in Northern Europe such as Denmark and Finland use administrative data for the Censuses, Korea should carry out further research to use resident registration administrative data in the Registration Census. Based on administrative data, the Registration Census is expected to reduce survey costs and to increase the accuracy and timeliness of surveys. Moreover, a wide variety of statistical demand will be satisfied by producing advanced statistics through the links among administrative data. The paper examines the difference when linking both resident registration administrative data and the results of 2005 Population Census, with a view to improving the Population Census method and preparing for the information age. Also this paper presents some proposals for future Population Censuses. With confidentiality given the top priority, this paper examines the link with matching value of ages and genders at Haeundae-gu, Busan and Boeun-gun, Chungbuk for pragmatic research. Hoenam-myeon, Boeun-gun, Chungbuk marks a low matching rate. Focused on Hoenam-myeon data, this research directly compares the results of 2005 Population Census with resident registration administrative data. Births, deaths, out-migrations and in-migrations from resident registration administrative data as of November 1st 2005 are used especially to increase comparison with the results of 2005 Population Census.

• Journal of Digital Convergence
• /
• v.18 no.8
• /
• pp.21-27
• /
• 2020

This paper studies the impact of domestic and foreign economic activity on mobility among regions. The shortage of human resources and demand continues in Eastern Europeans. Especially Ukrainians, have entered the Polish labor market to make up for the scarce areas. As a result, Poland's supply and demand in Ukraine is disproportionate. Minimum wage increases are putting continued pressure on employers. Therefore, the regression equation in the form of job-seeker's economic activity ratio, y= AX²+B,(x=settlers) can be used to grasp the relationship between curves. According to the domestic and foreign workers who migrated, economic activities was rather than increasing the local population, the settlers of nearby large cities is more proportional. Empirical analysis has shown that the human resource hub has increased migration to large cities and industrial. The hub 'A'nation has been created for mobility in 4th wave re-industry, and the same re-industrialization (N₂) in other cities has attracted nearby human resources, but not settle. After all, the hub relationship between N₁ and N₂ is a mobile relationship. Due to wage inequality or a positive wellbeing chasm, workers are not settled plant area but a nearby city, or commuting between borders is easy to go into the hub central city. However, this proved on emerging from the relatively temporary settlers in the AI era.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.5
• /
• pp.743-752
• /
• 2013

The objective of this study was to investigate the quality characteristics of spirits derived from fruit using copper distillation equipment. First, optimal yeast strains were chosen through a fermentation test on raw materials (apples, mandarins and rowanberries). The normal fermentation condition for rowanberries observed at a rowanberry concentration of 8% during mashing included chaptalization with sugar to increase the alcohol content. During the mashing, fruits were fermented and distilled through one of three different types of distillation apparatuses (pot distiller, vacuum distiller, or multistage distiller made of copper). The results revealed that the type of apparatus used affects the content of alcohol and flavor components. The distilled spirits prepared through a copper multistage distiller had a much higher tendency to retain components of fruit aromas such as ethyl acetate and provided higher yields than spirits prepared with a pot distiller or vacuum distiller. Thus, the copper multistage distiller apparatus can be applied to positively influence the taste and flavor of fruit distilled spirits by enhancing fruit aromas, removing impurities such as sulfur components and enhancing yields.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.1
• /
• pp.23-32
• /
• 2008

In order to discern the development of technology in creating, properly managing, and characterizing the types used in facade greening, this article examines the instances of facade greening of Bulgaria, Greece and Turkey which is not only located in the latitude similar to South Korea's but also influenced by the both continental and oceanic climate. The study was carried out for 11 months from October 2002 to September 2003. The total 242 places were researched and they were 83 sites in Athens, 77 sites in Istanbul, and 82 sites in Sofia. Varieties, usage, configuration, foundation and characteristics of plants were studied. The goals of greening, and building's surface roughness and thickness, direction of the wall were also researched. The result of survey are as follows; 17 families and 33 species of climbing plants were found in Athens, Istanbul, and Sofia. Thickness of facade greening in the three cities is 46cm in Athens, 39cm in Istanbul, and 53cm in Sofia. The possible facade greening size per a climbing plant, Parthenocissus tricupidata takes up the largest portion of the wall in the three cities similarly followed by Vitis vinifera and Wistaria spp. By its diversity it can be assumed that these plants are most practical for large scale of facade greening and full covering. Evergreen climbing plants such as Hedera helix and Ficus niponica are useful plants for relatively large scale of facade greening area. In the facade greening types, the climbing type is the most dominant in the three cities and most of the climbing type was planted on the natural foundation but the hanging and combination types were planted on an artificial foundation located on the balcony or on the roof of the building. In the directions of the walls for facade greening, the west direction are most popular which is for the improvement of sun shading in summer season. In Sofia the apartments were most applied with facade greening but In Istanbul and Athens the residential buildings and the public buildings were adapted with facade greening actively as well as residential building. The purpose of lowering summer heat took up the highest portion followed by the purpose of ornamentation and maintaining privacy in all surveyed cities.