• Journal of the Korean Society of Radiology
• /
• v.10 no.8
• /
• pp.603-610
• /
• 2016

This study was performed to analyze the results of radiologic parameters compared both leg weight bearing position to single leg weight bearing position in ankle osteoarthritis. Between January 2016 and June 2016, 25 patients (50 ankles) who visited our Hospital to treat ankle pain. In radiographic assessment, We masured tibial anterior surface angle(TAS), tibial medial malleolar angle(TMM), talar tilting angle(TT), joint space width(JSW), tibiotalar joint space, fibulotalar joint space of ankle as radiologic parameters. On the right leg of the both leg weight bearing position, TAS was $87.24^{\circ}$, TT was $6.44^{\circ}$, TMM was $26.76^{\circ}$, fibulotalar joint space was 0.98mm. Right leg of the single leg weight bearing position, TAS was $88.93^{\circ}$, TT was $2.41^{\circ}$, TMM was $19.77^{\circ}$, fibulotalar joint space was 1.6mm. And then, on the left leg of the both leg weight bearing position, TAS was $87.25^{\circ}$, TT was $5.71^{\circ}$, TMM was $23.92^{\circ}$, fibulotalar joint space was 1.22 mm and left leg of the single weight bearing position, TAS was 88.75, TT was $3.19^{\circ}$, TMM $21.45^{\circ}$, fibulotalar joint space was 1.22 mm. There are unsimilarity between measure values of TAS and tibiotalar joint space. As the result of test of weight bearing ankle study, it would be more exact to examine to measure one side in the first time rather than both to conclude on accurate measurement.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.261-271
• /
• 2009

Due to the recent rise of a need for 3 dimensional geospatial information on urban areas, general interest in aerial multi-view cameras has been on an increase. The conventional geospatial information system depends solely upon vertical images, while the multi-view camera is capable of taking both vertical and oblique images taken from multiple directions, thus making it easier for the user to interpret the object. Through our research we developed a prototype of a multi-view camera system that includes a camera system, GPS/INS, a flight management system, and a control system. We also studied and experimented with the camera viewing angles, the synchronization of image capture, the exposure delay, the data storage that must be considered for the development of the multi-view camera system.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.245-249
• /
• 2004

최근에는 항측기에 GPS/INS 장비를 탑재하여 사진의 촬영과 동시에 외부표정요소를 직접 결정할 수 있는 Direct Georeferencing 기술의 개발로 인하여 지상기준점측량과 AT과정이 불필요하게 되었다. Direct Georeferencing 기법을 이용하게 되면 외부표정요소를 구하기 위한 전처리 과정을 생략할 수 있다. 따라서 지상기준점을 이용한 사진기 준점측량(AT)을 수행하지 않더라도 수치표고모델만 미리 확보되어 있으면 촬영과 동시에 수치정사사진을 생성할 수 있다. 본 연구에서는 촬영과 동시에 GPS/INS에 의해 획득한 외부표정요소와 항공사진을 이용하여 영상매칭에 의하여 수치표고모델(DEM)을 자동 생성하고, 이 결과를 바탕으로 정사사진을 제작하였다. 실제 도화데이터와 Direct Georeferencing 정사영상과의 오차를 평가한 결과, 표준편차가 X는 약 62cm, Y는 약 76cm 정도가 발생하였다. 이 결과는 축적 1：5,000 수치지도의 정확도 요구를 충분히 만족시킬 수 있는 양호한 결과임을 알 수 있다. Direct Georeferencing에 의한 정사영상의 제작방법은 큰 크기의 과대오차가 발생하는 부분을 수작업 또는 반자동으로 해결할 수 있으면 효율적으로 수치지도를 수정/갱신 할 수 있을 것으로 판단된다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.11a
• /
• pp.81-85
• /
• 2009

입체영상콘텐츠 촬영기술은 촬영현장에서 리그라는 특수장비를 이용해 입체영상기술을 관할하는 스태프인 스테레오그래퍼, 영상콘텐츠의 전반적인 촬영기술을 주관하는 촬영감독의 협업을 통해 진행된다. 그러나 현재 한국의 입체영상콘텐츠 제작은 태동기에 있고 워크플로우는 아직 정착되지 않은 상태다. 본 연구는 입체영상콘텐츠 제작 사례를 기초로 입체영상 습득과 관련된 스태프의 직능을 구체적으로 분석함과 동시에, 높은 품질의 입체영상콘텐츠를 습득하고, 시간과 비용 면에서 효율적인 워크플로우를 디자인하였다.

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.91-100
• /
• 1998

In magnetic resonance imaging, the fast spin echo imaging technique is a widely used clinical imaging method. since its scanning time is much shorter than the conventional spin echo imaging and it gives the almost same image quality. However, the fast spin echo technique has two times longer imaging time for the dual echo acquisition which can obtain a spin density image and a T-give the same qulity images at the single echo imaging time. T he proposed technique reduces the imaging time by overlapping most of were obtained at the 0.3T permanent MRI system are presented.

• The Journal of the Korea Contents Association
• /
• v.11 no.2
• /
• pp.1-12
• /
• 2011

Movie contents requiring multiple shootings in places need much man power and many equipments. It is more serious in the case of multiple simultaneous shootings. In the points of small broadcasting companies, it is more difficult to cope with the situation, but it is also an essential task for the variety of video contents. We propose an one-person movie production scheme based on an IP camera-based live webcasting system which makes multiple shootings in places possible. It consists of three main functions of (1) collecting multiple video streams sent from IP cameras installed in places, (2) properly distributing them to Internet, and (3) receiving and editing them including recording video. By using the proposed scheme, we can be able to remotely utilize a new framework of Single-Person/ Multiple-Camera which beyonds the conventional Single-Person/Single-Camera framework. It becomes possible to take multiple simultaneous shoots in places. We can get an advantage of saving man power and time for producing various movie contents.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.3
• /
• pp.291-299
• /
• 2012

There are many kinds of techniques for imaging temporomandibular joints. None of them for imaging "best fit" for every patient of temporomandibular disorder is recommended ideally. It is more important to be able to select the modality that is most adequate and appropriate for a given clinical issue.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.78-82
• /
• 2009

최근 국내에는 다차원 공간정보 구축을 위하여 디지털 항공사진 및 항공라이다 장비를 이용하고 있으나, 위 데이터만을 이용하여 세밀하고 사실감 있는 3차원 공간데이터를 구축하는데 제한적이며, 고품질의 Texture Mapping을 위해 지상사진을 이용하지만 인력 및 작업 시간이 많이 소요된다. 이에 해외에서는 사실감 있는 3차원 공간정보 구축을 위하여 연직과 경사사진을 동시에 촬영하는 다각사진촬영시스템을 이용하고 있으며, 본 연구에서는 다각사진촬영시스템 개발시 고려해야할 경사사진 촬영 설계요소에 대하여 분석하였다. 연구결과 촬영고도, 카메라각도에 의하여 경사사진 주점의 거리, 지상해상도, 카메라 화각(FOV), 촬영영역에 대하여 분석할 수 있었다.

• Aerospace Industry
• /
• v.84
• /
• pp.45-47
• /
• 2004

필자는 고등학교 때 시작한 사진이 인연이 되어 대학과 공군 항공사진병, 10년간 다닌 첫 직장까지 20년 넘게 사진을 업으로 인연을 맺었습니다. 비행기를 좋아하다보니 공군 항공사진병을 지원했고, 회사생활에서도 많은 항공 촬영과 비행기 사진을 접할 기회가 많았습니다. 요즘도 비행기가 좋아서 초경량항공기 조종을 배우고 있다고 자랑한 덕분에 항공기 촬영에 대한 원고청탁을 받고 이제야 내가 좋아하는 두 가지를 동시에 할 수 있어 기쁜 마음으로 수락했습니다. 이를 두고 ''''일석이조''''라고 하든가요.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.53-56
• /
• 2010

An aerial multi-looking camera system equips itself with five separate cameras which enables acquiring one vertical image and four oblique images at the same time. This provides diverse information about the site compared to aerial photographs vertically. However, multi-looking Aerial Camera for building a 3D spatial information don't use a large-size CCD camera, do uses a medium-size CCD camera, if acquiring forward, backward, left and right imagery of Certain objects, Aerial photographing set overlap and sidelap must be considered. Especially, Sideward-looking camera set up by the sidelap to determine whether a particular object can be acquisition Through our research we analyzed of sideward footprint and aerial photographing efficiency of Multi-view imagery by sidelap changing.