• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.05a
• /
• pp.25.1-25.1
• /
• 2006

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.979-986
• /
• 2018

This paper deals with acoustic echo cancellation using blind signal separation method. This method does not degrade the echo cancellation performance even during double-talk. In the closed echo environment, the mixing model of acoustic signals is multi-channel, so the convolutive blind signal separation method is applied and the mixing coefficients are calculated by using the feedback model without directly calculating the separation coefficients for signal separation. The coefficient update is performed by iterative calculations based on the second-order statistical properties, thus estimates the near-end speech. A number of simulations have been performed to verify the performance of the proposed blind signal separation method. The simulation results show that the acoustic echo canceller using this method operates safely regardless of the presence of double-talk, and the PESQ is improved by 0.6 point compared with the general adaptive FIR filter structure.

• New Physics: Sae Mulli
• /
• v.68 no.12
• /
• pp.1374-1377
• /
• 2018

We achieved 95% visibility in the Hong-Ou-Mandel interference experiment while we achieved only 56% visibility in a previous report. We used a 120 mW 405 nm single-mode continuous wave laser, a 5-mm-thick type-1 ${\beta}$-barium borate single crystal, standard Hong-Ou-Mandel interferometer optics, two avalanche photodiode single-photon counters, and a homemade coincidence counting unit. The photon collection unit was the key difference between the present study and the previous study. In the present experiment, we used single-mode optical fibers for photon collection, which suppressed accidental coincidence between-different mode photons by acting as a spatial filter because of its core size being much smaller than a multi-mode fiber.

• Nuclear Engineering and Technology
• /
• v.19 no.2
• /
• pp.107-114
• /
• 1987

Using a solution of $^{137}$ Cs as a tracer, radioactivity of a $^{137}$ Cs solution is measured by coincidence and anticoincidence counting methods. Sample sources in this study are fabricated by mixing $^{137}$ Cs with tracer, and the mixing ratios are 1/3 and 1/5, respectively in coincidence and anticoincidence methods. Specific activities of a $^{137}$ Cs solution are calculated by means of f-channel low energy threshold level variation and efficiency extrapolation. The results obtained by coincidence and anticoincidence counting methods are 552.78 kBq/g and 554.32kBq/g, respectively on the reference date and the combined uncertainties are 1.60kBq/g and 1.51kBq/g for each method. These two results show a good agreement within the uncertainty range.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.3
• /
• pp.25-35
• /
• 1999

LTCC (Low Temperature Cofired Ceramic) or LTCC-M (Low Temperature Cofired ceramic on Metal) technology is one of MCM-C (Multichip Module on Ceramic) technologies and becomes to be widely used in consumer, RF and automotive electronics. As green sheets for LTCC are cofired below $1000^{\circ}C$ in comparison with those for HTCC (High Temperature Cofired Ceramic), high conductivity metal traces such as gold, silver and copper can be used. The dimensional stability in LTCC-M technology enables embedded passives to be integrated inside modules, which enhances the electrical performance and increases the reliability of the modules. Coefficient of thermal expansion and dielectric constant can be controlled by changing composition and heating profile for cofiring. In this technical review, LTCC and LTCC-M technologies are introduced and advantages of those technologies are explained.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.5
• /
• pp.525-533
• /
• 2001

The wind resistant design of long-span bridges has urged a special attention to the prevention of the flutter occurrence Therefore calculation of flutter derivatives is indispensable to this prediction. A used system identification method must identify all the flutter derivatives from noisy experimental data In this paper MITD(Modified Ibrahim Tim Domain) method and AKF (Adaptive Kalman Filter) method are applied to extract flutter derivatives from section-model tests. The robustness and reliability of proposal SI methods under a high signal-to-noise ratio is demonstrated through numerical simulation for windtunnel test.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.499-502
• /
• 2001

본 연구에서는 화자에 따라 서로 다른 성도의 길이에 의해 발생하는 음성인식 시스템의 성능 저하를 줄이기 위하여, VTN(Vocal Tract Normalization)을 음성인식 시스템에 적용하고, 주소 인식 실험을 통하여 인식 성능을 평가하였다. 또, VTN을 CMN과 동시에 적용하여 인식 실험을 하였다. 실험에서는 화자간 성도길이의 차이를 반영하기 위하여 13개의 Warping 계수에 대해 필터 뱅크를 이용한 선형 Warping 방법을 적용하였다. 실험결과, Baseline 인식 시스템에 비하여 VTN을 적용하면, WER(Word Error Rate)이 1.24% 감소하였고, CMN과 VTN을 동시에 적용한 실험에서는 Baseline 인식 시스템과 비교하여 WER이 0.33% 감소 하였지만 VTN을 적용한 실험결과와 비교하면 오히려 0.91% 증가하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.383-383
• /
• 1999

• Proceedings of the IEEK Conference
• /
• 2000.06d
• /
• pp.23-26
• /
• 2000

본 논문에서는 정확한 비트 제어가 가능한 I-frame의 효율적인 부호화 방법을 제안한다. 기존 H.263＋의 DCT 계수들을 트리 구조로 재구성하여 각 계수에 대해 임베이드 제로트리 부호화 알고리즘을 적용시켜 부호화함으로써 코딩 효율을 향상시킴과 동시에 비트 율의 제어가 용이하도록 한다. 제안 방법의 유효성을 검증하기 위해 표준 동영상에 대한 컴퓨터 모의 실험 결과 제안 방법은 기존의 부호화 방법에 비해 비트 제어가 용이하고 부호화 성능이 개선됨을 확인했다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.06a
• /
• pp.506-509
• /
• 2001

본 논문에서는 디지털 영상의 변조를 확인함과 동시에 변조의 위치를 확인하는 DCT 기반의 fragile watermarking을 제안한다. 디지털 영상의 인증과 무결성을 위해 기존의 Wong이 사용한 해쉬 함수와 비대칭키 암호 알고리즘을 사용하며, 영상에 DCT 변환을 함으로서 영상의 모든 픽셀에 워터마크를 삽입하지 않고서도 변조의 유무를 확인하는 것이 가능하다. 본 논문에서는 DCT 계수 중 일부 저주파 계수의 하위 비트에 워터마크를 삽입하여 워터마크의 비가시성과 연성을 만족하며 변조의 유무와 위치를 확인한 수 있게 된다.