• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.141-142
• /
• 2013

본 논문에서는 단일 Quasi Z-소스 AC-AC 컨버터에 의한 4상한 출력 AC전압 제어를 제안하였다. 제안된 듀티비 제어방법을 통하여 한 대의 Quasi Z-소스 AC-AC 컨버터로도 동상의 벅-부스트 모드와 역상의 벅-부스트 모드를 모두 출력하는 4상한 출력 AC전압 제어를 하였다. 한 대의 Quasi Z-소스 AC-AC 컨버터만으로 종전의 듀티비 제어에 의해 동상의 부스트 모드와 역상의 벅-부스트 모드의 출력 전압이 발생되며, 제안한 듀티비 제어에 의해 동상의 벅 모드가 출력되는 4상한 출력 AC전압 제어법을 PSIM시뮬레이션에 의하여 입증하였다.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.43-44
• /
• 2014

본 논문에서는 단상 Quasi Z-소스 AC-AC 컨버터 3대를 이용하여 3상 교류 출력전압 제어를 제안하였다. 제안된 시스템은 3대의 단상 Quasi Z-소스 AC-AC 컨버터에 종전의 간단한 듀티비 제어를 통하여 입력에 대하여 동상의 벅-부스트 출력모드와 역상의 벅-부스트 출력모드를 모두 출력하는 4상한 출력 3상 교류 전압 제어를 하였다. PSIM시뮬레이션을 통하여 종전의 듀티비 제어를 통한 동상의 부스트 모드와 역상의 벅-부스트 모드 출력 전압과 제안한 듀티비 제어에 의해 동상의 벅 모드가 출력됨으로써 단상 Quasi Z-소스 AC-AC 컨버터의 간단한 듀티비 제어만을 통하여 3상 4상한 교류 출력전압 제어가 되는 것을 확인하였다.

• Aerospace Engineering and Technology
• /
• v.5 no.2
• /
• pp.67-76
• /
• 2006

This paper describes the analysis method to define the system specification for conducted EMI environment and verification method to evaluate the conducted EMI performance. Conducted EMI environment is characterized by the electrical power subsystem which is mainly issued by the switching circuit noise, common ground impedance coupling. To define and control these EMI problems, EMI assesment through system analysis are preceded at the early design phase and then EMI reduction methods are applied during the unit/system development phase. System EMC should be carefully controlled and designed in the consideration of EMC safety margin and its performance is fully evaluated at the whole development period.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.1141-1142
• /
• 2023

본 연구는 4륜 독립 구동·제동·조향 차량의 모드 천이 논리 알고리즘에 관한 연구로서, 일반적인 주행 스타일 외에도 다양한 주행 스타일을 가지는 차량에서 주행 모드 전환 간에 고려되어야 하는 조건들을 다룬다. 주행 모드 전환 간에 Static Transition과 Dynamic Transition이 가능하며 Static Transition 방식이 일반적이지만 저속 상태에서 차량이 충분히 정렬되어 있다면 FWS 주행, 동상 주행, 역상 주행 간의 Dynamic Transition도 가능할 것이다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.273-274
• /
• 2013

본 논문에서는 저전압 스마트 배전시스템을 위한 Quasi Z-소스 AC-AC 컨버터를 제안하였다. 제안된 시스템은 Quasi Z-소스 AC-AC 컨버터의 교류 입력 전압에 대하여, 동상의 출력 전압을 부스트 하고, 역상의 출력 전압을 벅-부스트하는 고정 주파수 가변 전압 VVCF(Variable Voltage Constant Frequency)의 출력특성을 가지고 있다. 또한 Quasi Z-소스 AC-AC 컨버터의 shoot-through 스위치 단에 벅-컨버터를 연결하여 Quasi Z-소스 AC-AC 컨버터의 동작과 함께 저압의 직류 전압을 출력 할 수 있다. PSIM 시뮬레이션과 실험에 의하여, 제안된 시스템이 동상 부스트 모드로 동작하는 경우, PI 제어된 벅 컨버터에 의하여 직류 전압을 출력할 수 있음을 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.96-97
• /
• 2019

Pulse Width Modulation (PWM) is a widely adopted technique to drive the motor using the voltage source inverters. Since they generate high frequency Common Mode (CM) Voltage, a high shaft voltage in induction motor is induced which leads to parasitic capacitive currents causing adverse effects such as premature deterioration of ball bearings and high levels of electromagnetic emissions. This paper presents an Active Cancellation Circuit (ACC) which can significantly reduce the CM voltage hence the common mode current in the three phase induction motor drives. In the proposed method the CM voltage is detected by the capacitors and applied to the frame of the motor to cancel the CM voltage hence the CM current. Unlike the conventional methods the proposed method does not insert the transformer in between the inverter and motor, a high power rating three phase transformer is not required and no losses associated with it. In addition the proposed method is applicable to any kind of PWM motor drives regardless of their PWM methods. The effectiveness of the proposed method is proved by the experiments with a three phase induction motor (1.1kW 415V/60Hz) combined with a three phase voltage source inverter modulated by the Space Vector Modulation (SVM).

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1515-1517
• /
• 2005

In this paper, we represent both occurrence reason of Surge-voltage and Leakage-current of AC drive system which is operated by Voltage-type PWM Inverter. It generates a compensating voltage which has the same amplitude as, but the opposite phase to, the common-mode voltage produced by the PWM inverter. The compensating voltage is superimposed on the inverter output by a common-mode transformer. As a result, the common-mode voltage applied to the load is canceled completely. The design method of the active common-mode noise canceler is also presented in detail. Therefore, we try to describe the method controling both of them and all of the proprieties are proved by our experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.415-429
• /
• 2011

In this study, a single-phase quasi Z-source AC-AC converters with a series connection of the output terminals is proposed. The proposed system has configuration that the input terminals of two quasi Z-source AC-AC converters are connected in parallel and its output terminals are connected in series. The out of phase mode and in phase mode of the proposed system are presented. To verify the validity of the proposed converter, a DSP controlled hardware was made and PSIM simulation was executed. As a result, controlling the duty ratio of the converter, the desired buck-boost output voltages could be generated. For each modes, as compared with the single converter operation, the proposed converter could enhance the efficiency and input power factor according to different loads. Also, in case of the out of phase mode under the constant load, the efficiency and input power factor of the proposed system are increased 10[%], 35[%] respectively in compared with the single converter. And, the output voltage is constantly controlled in dynamic state in case while the load is suddenly changed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.6
• /
• pp.610-619
• /
• 2000

This paper presents an off-line UPS using the high temperature superconductive magnetic bearing. FES(Flywheel Energy Storage) system has good advantages in compare with lead acid battery. So, high efficiency FES using high temperature SMB(superconductive magnetic bearing) was composed in this paper. The outer rotor type of PMSM(Permanent Magnet Synchronous Motor) as motor/generator was used for the experiment, and square wave current and sinusoidal wave control methods was compared for high efficiency operation of motor/generator. The circuit for in phase sinusoidal wave current control with EMF in the full speed range was designed and the proposed flywheel energy storage system was applied in single phase off-line UPS system. As the stable operation characteristics of prototype system was confirmed, the its excellence as energy storage device in Off-line UPS was proved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1903-1907
• /
• 2013

Heart condition should be observed for long periods of time because it does not appear abnormal all the time. However, there are many difficulties checking our health for a long time due to its size, operation of equipment, and cost. To solve these problems, an electrocardiograms(ECG), specially interfacing three gel-less metal electrodes for low cost portable applications, is designed and implemented. Gel-less metal electrodes are used for ECG monitoring system instead of gel-type electrodes that can cause skin rashes and itching problem. The whole ECG system consists of two parts-analog and digital circuits. The analog measurement circuit that has a 18*25mm size is made up of op-amps maintaining a sufficiently high common-mode noise rejection and passive elements of SMD type. Analog heart signal is converted to digital stream suitable for display on a TFT-LCD by an 8-bit microcontroller. The size of the completed ECG system is 25*80*50mm and its weighing is about 150g, which is small enough to be easily used. Therefore, the implemented ECG system can be used as a portable one.