• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.2
• /
• pp.207-212
• /
• 2013

In this study, distributed the ship's Centralized Air Conditioning System the way an individual to replace the air conditioning system by using Air-cooled air conditioner. Research results, Individually separated air conditioning system complement the heat source control and thermal efficiency problems and improves the efficiency of the device was confirmed. In addition, under the same conditions refrigeration capacity and coefficient of performance of the device, an average of about 3 %, 23 ~ 26 %, higher, Chilled Water Plants Compressor power consumption is about 12 % lower. Also while heating under the same conditions, power consumption is about 33.5 % lower. Therefore Individually Separated Air Conditioning System greatly contributed to the improved performance of the device and living spaces for comfortable temperature and humidity control as well as heating source could be obtained.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.581-586
• /
• 2015

Adsorption of Safranin using granular activated carbon from aqueous solution was investigated. Batch experiments were carried out as a function of adsorbent dose, initial concentration, contact time and temperature. The equilibrium adsorption data were fitted to Langmuir, Freundlich and Dubinin-Radushkevich isotherm models. Based on an estimated Langmuir separation factor, $R_L=0.183{\sim}0.254$ and a Freundlich separation factor, 1/n = 0.518~0.547, this process could be employed as an effective treatment method. Adsorption data were also modeled using the pseudo-first and second-order kinetic equations. It was shown that the pseudo-second-order kinetic equation could best describe the adsorption kinetics. The negative Gibbs free energy (${\Delta}G=-3.688{\sim}-7.220kJ/mol$) and positive enthalpy (${\Delta}H=33.126kJ/mol$) indicated that the adsorption process was spontaneous and endothermic.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.615-626
• /
• 2009

The objective of this study is to investigate the interference effects due to tandem rotor's overlap in the forward flight. To resolve the instabilities caused by close proximity of the wake to the blade surface, the field velocity approach is implemented to the existing unsteady panel code coupled with a time-marching free wake model. The modified code is then used to investigate the effects of the selected parameters on the forward flight performance of the tandem rotor. The calculated results for rotor separation effect indicate that stagger(d/D) appears to have little effects on the forward flight performance at high advance ratio and the square of gap(H/D) is inversely proportional to overlap induced power factor. In addition, it is also shown that the overlap induced power factor increases to a certain extent and decrease back as the advance ratio increases.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.4
• /
• pp.298-304
• /
• 2014

The lifting-line method based on Weissinger's method is extended to be able to analyze the ground effect. The method is applied to predict the variation of aerodynamic performance due to ground effect for the elliptic wing with aspect ratio of 10 and the wing of human powered aircraft. While the vortex strength of the wing increases slightly, the downwash decreases significantly as the wing approaches to the ground. For the wing of human powered aircraft, the increment of lift at the height of 2m is 5% than the lift outside the influence of ground effect. The decrease of induced drag at the height of wing span is 10% and at the height of 2m is 55% than that out of ground effect.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.209-216
• /
• 1999

일반적으로 힘 제어는 힘 센서의 사용 여부에 따라 능동적 힘 제어와 피동적 힘 제어로 분류시킬 수 있다. 능동적 힘 제어는 힘 세서를 이용하여 구속력을 목표한 힘에 근접하도록 제어한다. 유연 매니퓨레이터의 함수(위치, 속도, 가속도)를 이용하여 일정한 힘에 근접하도록 제어한다. 유연 매티퓨레이터에 있어서 링크 선단의 강성 증대는 힘 제어뿐만이 아니라, 링크의 진동을 크게 유발함으로서 위치 제어에 불리하게 작용한다. 주로 사용되고 있는 힘 센서는 많은 변형 게이지(strain gauge)로 구성되어 있다. 유연 매니퓨레이터 또한 링크 선단의 변형을 측정하기 위해 변형 게이지를 사용하고 있다. 본 논문에서는 이점에 착안하여, 유연 매니퓨레이터의 선단의 탄성 변형을 측정하기 위해 장착한 변형 게이지를 이용한 위치/힘 제어를 제안한다. 먼저, 유연 매니퓨레이터의 집중 정수 모델로부터 링크의 탄성 변형과 구속력 관계를 도출한 후 이 관계를 이용하여 3차원 실험 유연 매니퓨레이터를 실시간 위치/힘 제어 실험을 수행하였다. 또한 범용 동력학 해석 소프트웨어인 ADAMS FEM 을 이용하여 해석하였다. 마지막으로, 실험 결과와 해석 결과를 비교 분석하여 본 논문에서 제안한 유연 매니퓨레이터의 위치/힘 제어의 타당성을 입증시켰다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.8
• /
• pp.805-811
• /
• 2009

An oxidizer pump of a turbopump for a 30-ton class gas generator cycle engine was tested in the medium of liquid oxygen. The turbine was driven by cold hydrogen gas in the test. The oxidizer pump was operated stably at both design and off-design conditions, satisfying the performance requirements. The pump head coefficient from the liquid oxygen test was 2~3% lower than that from the water test. The power required to run the oxidizer pump was well balanced with the power produced by the turbine.

• Clean Technology
• /
• v.25 no.1
• /
• pp.56-62
• /
• 2019

The equilibrium, kinetic and thermodynamic parameters of adsorption of murexide by granular activated carbon were investigated. The experiment was carried out by batch experiment with the variables of the amount of the adsorbent, the initial concentration of the dye, the contact time and the temperature. The isothermal adsorption equilibrium was best applied to the Freundlich equation in the range of 293 ~ 313 K. From the separation factor (${\beta}$) of Freundlich equation, it was found that adsorption of murexide by granular activated carbon could be the appropriate treatment method. The adsorption energy (E) obtained from the Dubinin- Radushkevich equation shows that the adsorption process is a physical adsorption process. From the kinetic analysis of the adsorption process, pseudo second order model is more consistent than pseudo first order model. It was found that the adsorption process proceeded to a spontaneous process and an endothermic process through Gibbs free energy change ($-0.1096{\sim}-10.5348kJ\;mol^{-1}$) and enthalpy change ($+151.29kJ\;mol^{-1}$). In addition, since the Gibbs free energy change decreased with increasing temperature, adsorption reaction of murexide by granular activated carbon increased spontaneously with increasing temperature. The entropy change ($147.62J\;mol^{-1}\;K^{-1}$) represented the increasing of randomness at the solid-solution interface during the adsorption reaction of murexide by activated carbon.

• Korean Chemical Engineering Research
• /
• v.53 no.1
• /
• pp.64-70
• /
• 2015

Batch experiment studies were carried out for adsorption of congo red using granular activated carbon with various parameters such as activated carbon dose, pH, initial dye concentration, temperature and contact time. Equilibrium experimental data are fitted to the Langmuir, Freundlich, Temkin and Dubin-Radushkevich isotherm equations. From Freundlich's separation factor (1/n) estimated, adsorption could be employed as effective treatment method for adsorption of congo red from aqueous solution. Base on Temkin constant (B) and Dubinin-Radushkevich constant (E), this adsorption process is physical adsorption. Adsorption kinetics has been tested using pseudo-first order and pseudo second order models. The results followed pseudo second order model with good correlation. Adsorption process of congo red on granular activated carbon was endothermic (${\Delta}H$=42.036 kJ/mol) and was accompanied by decrease in Gibbs free energy (${\Delta}G$=-2.414 to -4.596 kJ/mol) with increasing adsorption temperature.

• 지역과문화
• /
• v.4 no.2
• /
• pp.1-23
• /
• 2017

The regional development plan by the city of Andong in establishing the foundation for cultural eco-tourism in the cultural area of confucianism(2010-2020) consists of 2 leading projects (the World Confucian Scholar Culture Park, the Korean Culture Theme Park) and 2 strategic projects (the Confucian Scholars' Literature Park, the Sunsunghyun Culture Complex, the Traditional Bittarae Weaving Village). By inter-regional input-output analysis, their multiplier effects of output, value-added, income and employment are estimated respectively 990.2 billion won(multiplier 2.23), 318.2 billion won(multiplier 0.72), 187.7 billion won(multiplier 0.42), and 4,791 workers(multiplier 10.6 workers/billion won). The ongoing project has been, however, delayed due to various issues and has hit a ceiling towards achieving the original objectives of the familiarization, industrialization and globalization of Confucian culture. To overcome these problems, the associated plans of constructing the Korean SMART LINK LINE, of developing contents blending traditional culture and ICT, of establishing tourist complexes and infrastructure around Lake Andong, and of constructing interactive attractions of traditional culture were proposed as new growth-leading plans.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.5
• /
• pp.86-92
• /
• 1997

An ultrasonic motor(USM) has good characteristics such as compact size, silent motion, high speed responce, low speed and high torque. The USM is driven by 2-phase AC electricity. The control parameters of USM are voltage, phase, and frequency of input powers, etc. In this paper, the fine elasticity and viscosity control with no force feedback can be implemented by a phase difference parameter. Experiment results show the change of torque with regard to elasticity and viscosity. Therefore the USM can be used as a micro-actuator in the automation field of the installation.