• Resources Recycling
• /
• v.24 no.1
• /
• pp.28-34
• /
• 2015

Generally, when using copper slag mixed into the concrete, due to higher weight of copper slag, a reduction in the compressive strength and durability of the hardened concrete to increased bleeding is caused. In this study, hence copper slag, a kind of by-product was used as an alternative to the fine aggregate, it was carried out in combination with the use of fly ash in eliminating disadvantage and recycling aspects. As a result of this study, the mixing of fly ash is decreased in the 50% of bleeding, 5% of drying shrinkage, 30% of carbonation test and improvement of 10% of compressive strength than that of copper slag only at most.

• Journal of Internet Computing and Services
• /
• v.12 no.3
• /
• pp.1-16
• /
• 2011

In this paper, we proposed the Failure-Diagnostic Context-awareness Middleware (FDCM) for improving the reliability in the USN application service. The middleware diagnoses the failure occurred in sensors or facilities in the indoor USN application system. The new middleware suggested in this paper consists of DataManagement module, ContextProvider module, Contextlnterpreter module, ServiceProvider module and DataStorage module. By analysing the data obtained by the interaction between modules through the diagnostic algorithm, the FDCM determines the malfunction of sensors and equipment devices. Then we verified the performance of middleware by using simulation. As a result, the FDCM showed the high performance in the large systems that many of the sensors and devices are installed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.12
• /
• pp.68-75
• /
• 2005

The effects of the physical properties of primary flow on the performance of a supersonic ejector were investigated. Axisymmetric annular injection type supersonic ejector was used for the study of the effects of molecular weight and the specific heat at constant pressure on the ejection performance. Test gases include; air, $CO_{2}$, Ar, $C_{3}H_{8}$, and $CCl_{2}F_{2}$ for different values of gas properties. As the molecular weight and CP of the primary gas increase, the secondary flow pressure increases at the same primary stagnation pressure and this behavior results from the combined effects of molar specific heat or specific heat ratio.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.88-88
• /
• 2003

로켓 엔진 시스템에는 가압가스로 추진제를 엔진으로 공급하는 가압 시스템과 터보펌프를 이용해 엔진으로 고압의 추진제를 공급하는 터보펌프 시스템으로 나눌 수 있으며 터보펌프 시스템은 다시 Gas Generator를 이용하는 개방형 엔진과 Prebumer를 이용한 폐쇄형 엔진인 다단 엔진으로 구분할 수 있다. 로켓의 엔진 시스템은 Turbine, Turbopump, Gas Generator, Thrust Chamber, Tube, Valve, Propellant Tank 등 각 구성품 간에 서로 상호간섭이 매우 심한 공정이다 로켓 엔진 시스템은 이와 같은 상호간섭에 의해 추력 제어 및 혼합비 제어, 추진제 소진 제어 적용 시 정확하고 강인한 제어를 수행하여야 한다. 이를 위해 정확한 동특성 모델을 구축하는 것이 중요하며 모델을 통해 적절한 제어 시스템을 선택하여야 한다. 그러나 현재 국내에는 이에 대한 연구가 미미하며 해외의 경우 로켓은 특수 분야에 속함으로 공개되어 있지 않다. 로켓에 대한 개발 연구에 있어서는 위와 같은 작업이 선행되어야 하며 이에 대한 선행 연구로 한국항공우주연구원에서 Gas Generator를 이용한 개방형 터보펌프 엔진 시스템에 대한 연구를 진행하고 있다. 본 논문에서는 Gas Generator를 이용한 개방형 터보펌프 엔진시스템에 대한 동특성 모델을 구성하였다. 배관부, 터빈, 펌프, 밸브, Gas Generator, 재생냉각, 추력연소실 등 엔진 시스템을 구성하는 구성품에 대한 동특성 모델을 구성하였으며 이를 matlab의 simulink를 통해 각 구성품을 연결하여 최종 엔진시스템의 동특성 모델을 구성하였다. 구성된 동특성 모델을 통해 각종 변화(추진제 밀도 변화, 추력 변화, 혼합비 변화 등)에 대한 엔진 시스템 변화를 예측하여 정확한 엔진 시스템에 대한 이해를 넓혔으며 추력 제어 및 혼합비, 추진제 소진 제어를 최적으로 할 수 있는 제어 시스템 구축을 위한 기초 자료로 이용할 수 있을 것이다.

• The KIPS Transactions:PartB
• /
• v.9B no.4
• /
• pp.453-458
• /
• 2002

It is not easy to analyze dynamic sports motion, but it can be done easily by using an interactive playback of the recorded motion. Everybody is able to capture a golf swing owing to the popularization of PC and digital camcorder in these days. In this study, the system that can provide golf swing analysis is selected and implemented. Furthermore, editing method that can represent motion is applied and moving object tracking algorithm that can make this profess easy is applied to provide easy golf swing analysis.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.3
• /
• pp.45-50
• /
• 1999

Copper has been widely used for the electronic parts, and especially spot welded one for the leads of condenser or resistor. However, copper is generally hard to be spot welded because of its low electrical resistivity. For this experiment, Sn-37%Pb solder which has relatively higher resistivity was coated on the Cu-sheet to improve the spot weldability of copper. As the experimental variables welding pressure was varied from 100 to 200kgf, welding time from 20 to 50ms, and welding current from 100 to 2500A. Experimental results showed that the solder coated Cu-sheet can be spot welded under the conditions of 400~2200A welding current, 100~200kgf pressure and 20-50ms welding time. The tensile shear strength of the spot welded joint increased with welding current up to the critical current, and after the critical value decreased with current.

• Journal of Korean Society for Geospatial Information Science
• /
• v.4 no.1 s.6
• /
• pp.43-55
• /
• 1996

The objective of this research is to design a digital map database structure supporting video images which is one of the fundamental elements of hypermap. In order to reach the research objective, the work includes the identification of the relationships between two dimensional digital map database and video elements. The proposed database model has functions for interactive browsing between video image frames and specific points on two dimensional digital map, fer connecting the map elements and features on video images. After that, the images and the database are transformed to the pilot system fer testing the map database structure. The pilot project results indicate that the map database structure can integrate functionally two dimensional digital map and video images.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.1
• /
• pp.45-54
• /
• 2011

A program aiming at predicting dynamic characteristics of a Liquid Rocket Engine(LRE) was developed and examined to trace entire LRE operation. In the startup period, transient characteristics of the propellant flows were predicted and validated with hydraulic tests data. An arrangement of each component for the pipelines was based on an operating circuit of open cycle LRE. The flow rate ratio for the gas generator and the main chamber was determined to mimic that of real open cycle LRE. Individual component modeling at its transient was completed and was integrated into the system prediction program. Essential parameters of the component dynamic characteristics were examined in an integrated fashion.

• The Journal of the Korea Contents Association
• /
• v.7 no.12
• /
• pp.41-54
• /
• 2007

The recent UCC video sector possesses an explosive potential for growth as it will act as a critical factor in determining the popularity of portal sites. We identified and compared the strengths and weaknesses in the UCC sector of "Naver" and "Daum", which are currently in the development phase, and we investigated alternatives as well as proposing an outlook for both portal companies. We believe a better UCC video service will be the deciding factor in a portal's popularity and therefore researches in the UCC video sector must continue.

• Journal of Korea Multimedia Society
• /
• v.14 no.8
• /
• pp.1050-1060
• /
• 2011

With increasing need for indexing of persons in a large video database, automatic indexing has been attracting great interest which takes advantage of automatic tagging instead of the time-consuming and costly manual tagging. However, automatic indexing approach should provide a degree of recognition proximity because it cannot identify the persons with accuracy of 100%. In this paper, we propose an efficient storage method for storing posting lists efficiently and a novel ranking technique of ordering relevant videos for efficient retrieval. Through experiment evaluations we have shown that our storage method exhibits good performance in compressing the posting list. We have also shown that the proposed ranking method is effective for finding relevant videos.