• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.551-551
• /
• 2017

우리나라와 동아시아는 경제 성장에 따른 전력수요가 크게 증가하였으며, 증가하는 대부분의 전력수요를 원자력으로 대체하고자 원전을 통한 전력생산 비중을 증가시키고 있다. 현재 중국은 13기의 원전을 가동 중이며, 동남 해안지대에 집중되어 있다. 또한, 건설 중인 원전은 27기로 전세계에서 건설 중인 원전의 41%를 차지한다. 원전의 증가에 따른 방사능 누출에 대한 위험성 역시 증가되고 있는 실정이다. 한국원자력안전기술원에서 중국 중서부지역에서 방사능이 누출될 경우 방사성 물질이 한반도로 이동하는 모의 상황에 대한 시뮬레이션을 통해, 원전 사고 발생 시 사흘 만에 제주도를 포함한 대한민국 전역이 방사성 물질로 뒤덮이는 것으로 분석하였다. 중국에서 누출된 방사성물질은 편서풍을 타고 한반도로 이동하게 되며, 일부는 낙진으로 유역 또는 하천에 유입되고 일부는 동해를 지나 일본으로 이동 할 것이다. 그동안 중국에서의 방사능 누출사고를 통한 방사성물질의 국내유입에 의한 영향에 대한 연구가 부족한 것이 현실이다. 이에 본 연구에서는 중국 텐완에서 원전사고 발생시 국내 하천에 어떠한 영향을 미치는지 분석하고자 환경다매체 모형을 이용하여 방사성물질(세슘, Cs-137)의 영향에 대한 모의를 진행하였다. 중국 텐완원전에서 방사성 Cs-137이 누출되어 춘천지역에 도달하였을 때의 대기중 농도 $5,650Bq/m^3$로 가정하여 모의 시나리오를 구성하였다. 모의 지역은 북한강 수계를 대상으로 하였으며, 7개의 중권역과 549.3 km의 하천이 포함되었다. 다매체 모형 모의를 통해 방사성물질 낙진으로 인한 Cs-137이 북한강 수계에 어떠한 영향을 미치는지 알아보고자 북한강수계의 팔당댐 부근의 오염농도를 모의하였다. 우리나라의 원자력시설 방호 방재법에 따른 상수원 취수기준(먹는물)은 100 Bq/L로 되어있다. 본 연구의 시나리오 모의결과, 모의 1일차에서 45 Bq/L, 모의 8일차에는 먹는물 기준 100 Bq/L를 초과하여 최대 119.56 Bq/L로 오염되는 것으로 모의되었다. 따라서, 반감기가 큰 방사성물질을 유입으로 오염된 하천은 개선하기 위해서는 오랜 시간과 높은 처리비용이 발생되기 때문에 인접국 또는 국내의 방사능 누출로 인한 상수원 오염 발생에 대비한 초기/중 장기적인 대응책 마련이 필요한 시점이다.

• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.181-189
• /
• 2021

This study is a prior research to manufacture a thermoplastic mask, which is a fixture used in radiation therapy, by 3D printing. It proceeded to analyze the filament material that can replace the thermoplastic. Among the commercially available filament materials, a material having similar characteristics to that of a thermoplastic mask was selected and the radiation dose was compared and analyzed. The experiment used Monte Carlo simulation. The shape in which the mask fixed the head was simulated for the ICRU sphere. The photon fluence was calculated at the skin Hp (0.07), the lens Hp (3), and the whole body Hp (10) by applying a thermoplastic plastic material and a filament material. As a result, when looking at the relative dose based on the thermoplastic plastic material, the difference was approximated within 4%. The material showing the most similar dose was PA-nylon. In selecting an appropriate filament material, it should be selected by comprehensively considering various conditions such as economical efficiency and radiation effects. It is thought that the results of this study can be used as basic data.

• Journal of radiological science and technology
• /
• v.41 no.6
• /
• pp.561-566
• /
• 2018

Field-in-Field Technique is applied to the radiation therapy of breast cancer patients, and it is possible to compensate the difference in breast thickness and deliver uniform dose in the breast. However, there are several fields in the treatment field that result in a more complex dose delivery than a single field dose delivery. If the patient's respiration is irregular during the delivery of the dose by several fields and the change of respiration occurs, the dose distribution in the breast changes. Therefore, based on the computed tomography images of breast cancer patients, a human model was created by using a 3D printer (Builder Extreme 1000) to describe the volume in the same manner. A computerized tomography (CT) of the human body model was performed and a treatment plan of 260 cGy / fx was established using a 6-MV field-in-field technique using a computerized treatment planning system (Eclipse 13.6, Varian, USA). The distribution of the dose in the breast according to the change of the respiration was measured using a moving phantom at 0.1 cm, 0.3 cm, 0.5 cm amplitude, using a MOSOXIDE Silicon Field Effect Transistor (MOSFET, Best Medical, Canada) Were measured and compared. The distribution of dose in the breast according to the change of respiration showed similar value within ${\pm}2%$ in the movement up to 0.3 cm compared to the treatment plan. In this experiment, we found that the dose distribution in the breast due to the change of respiration when the change of respiration was increased was not much different from the treatment plan.

• Journal of Korean Academy of Nursing
• /
• v.49 no.4
• /
• pp.472-485
• /
• 2019

Purpose: This study aimed to develop and evaluate the effectiveness of an adapted health literacy self-management intervention for elderly cancer patients undergoing chemotherapy. Methods: The intervention in this study was systematically developed through the six stages of Intervention Mapping Protocol and was based on Fransen et al's causal pathway model. A quasi-experimental trial was conducted on a total of 52 elderly patients (26 in an experimental group and 26 in a control group) undergoing chemotherapy in Korea. The intervention consisted of seven sessions over 5 weeks. The experimental tool for this study was an adapted health literacy self-management intervention, which was designed to promote a reduction in the symptom experience and distress of elderly cancer patients through the promotion of self-management behavior. To develop efficient educational materials, the participants' health literacy was measured. To educate participants, clear communication and the teach-back method were used. In addition, for the improvement of self-efficacy, four sources were utilized. For the promotion of self-management behavior, five self-management skills were strengthened. Data were collected before and after the intervention from June 4 to September 14, 2018. The data were analyzed with SPSS/WIN 21.0. Results: Following the intervention, self-management knowledge and behavior and, self-efficacy significantly improved in experimental group. Symptom experience and distress decreased in the experimental group compared to the control group. Conclusion: The self-management intervention presented in this study was found to be effective in increasing self-management knowledge and behavior and, self-efficacy, and ultimately in reducing symptom experience and distress for elderly patients undergoing chemotherapy.

• Journal of radiological science and technology
• /
• v.44 no.3
• /
• pp.195-203
• /
• 2021

Although intra oral dental x-ray is a lower dose than other radiological examinations, pediatric patients are known to have a higher risk of radiation damage than adults. For this reason, pediatric dental x-ray requires management of dose evaluation and imaging conditions during the examination. In this study, the dose calculation program ALARA-Dental(child/adult) was used to evaluate the organ dose and effective dose exposed to each examination site during intra oral imaging of children during dental radiographic examination, and dose analysis according to the imaging conditions was performed. As a result, the highest organ dose distribution was shown at 0.044 ~ 0.097 mGy in all are as of the mucous membrane of oral cavity except for the maxillary incisors and canines. Also, in the case of the thyroid gland, the maxillary canine and maxillary premolar examination showed 0.027 and 0.020 mGy, respectively, and the dose distribution was 15.4% to 70.0% higher than that of the mandibular examination. As for the effective dose calculated during intra oral imaging, the maxillary anterior and canine examinations showed the highest effective doses of 0.005 and 0.004 mSv, respectively, and the maxillary area examination showed a higher dose distribution on average than the mandible.

• Journal of radiological science and technology
• /
• v.44 no.3
• /
• pp.205-210
• /
• 2021

The purpose of this study was to analyze the spatial dose according to the distance by location of medical workers when using a mobile X-ray fluoroscopy device in the operating room through a simulation experiment. The MCNPX program was used for the simulation, and the location of medical workers was set around the operating table, and the spatial dose distribution according to the distance and changes in imaging conditions was evaluated. As a result, The highest score was 2.74×10^-4 mGy, 2.72×10^-4 mGy, and 1.18×10^-4 mGy based on the 10 cm distance from the operating table. Spatial dose depending on the distance 100cm, A point 5.15×10^-5 mGy is decreased 19% of 10cm, D point 5.12×10^-5 mGy, 19 % of 10cm, and G pint, 1.73×10^-5 mGy is reduced by 15% of 10cm. Based on this study, medical-related workers directly or indirectly participating in surgery carry potential risks of radiation exposure during surgery, but there are difficulties in radiation protection due to the nature of their work. Therefore, efforts to reduce exposure suitable for the operating room environment will be required.

• Journal of the Korean Society of Radiology
• /
• v.16 no.7
• /
• pp.825-833
• /
• 2022

In 3D printing technology, materials that can be printed are increasing along with the development of material engineering, and materials that can be used in the field of radiation are also increasing. Therefore, depending on the composition and density of the materials used, the applied field can be different and applied, so the composition and characteristics of the materials must also be considered. In this study, 10 filaments with different properties were selected using a 3D printer of the FDM (Fused Deposition Modeling) method, and the brightness change of each filament was checked using a diagnostic X-ray generator, and the CT number was measured through CT. I wanted to find a material similar to bone. As a result, a material called silicon carbide was found, which has a similar brightness and CT number to bone. It is thought that further research will be presented as basic data for various studies with a density similar to that of human bones.

• Journal of Korean Port Research
• /
• v.11 no.2
• /
• pp.305-320
• /
• 1997

The objective of this paper is to analysis & forecast on the change in spatial structures of southeast region by development of the Seoul-Pusan high-speed Rail. To measure the spatial structures, it was used the method of mean center and standard distance among of centrographic measures as analytical tools. The changes of spatial structures patten over time and space in the southeast region were surveyed using population and employment data of 57 zones. And also, to forecast the spatial structures of the southeast region after opening of the Seoul-Pusan high-speed rail, it was supposed three(3) scenarios which designed using influential area with centering around of the proposed high-speed rail stations. Therefore, the results of this research indicate as follows; 1) The spatial structures of population is showed a trend of continual concentration toward Ulsan city area, and also the spatial structures of employment is showed a trend of continual dispersion over time. 2) The forecast of three93) scenarios supposed after opening of the Seoul-Pusan high-speed rail in 2006 show a change of the spatial structures with both population concentration and employment dispersion. In the meantime, the rapid increase of population and wide dispersion of employment is reform with centering around HSR stations which builted in the southeast region after opening of high-speed rail. 3) It shall furnish valuable data to establish the development strategy of urban and local region, and also forecast the change of spatial structures about population and employment in influential area which passed on high-speed rail line & stations by method of mean center and standard distance among of centrographic measures as analytical tools.

• Journal of Korea Water Resources Association
• /
• v.56 no.5
• /
• pp.357-362
• /
• 2023

The conflict between upstream and downstream regions is a representative social conflict in Korea. It is important issues in the economic and environmental aspects related to interests of property rights and water quality conservation. however, it is insufficient for studies on the economic damage and benefits between upstream and downstream by policy. We studied validity for drinking water protect zone, one of the major water conflict in Korea, by comparison between social loss by property rights restriction in the upstream and social benefits in the downstream and we proposed integrated water management policy in basin level.

• Journal of the Korean Geographical Society
• /
• v.29 no.2
• /
• pp.137-165
• /
• 1994

Structural adjustment of industry (or industrial restructuring) seems to be inherent in the process of capitalist economic development, which tends to be proceeded with shifts from one stage to another in order to overcome structural crises generated in each stage. The structural adjustment of industry is necessarily accompanied with regional restructuring, since it is not only projected on spece, but also mediated by space. Such a restructuring necessitates industrial and uneven regional devlopment through which capital can seek excessive profits over the rate of socio-spatial average. The industrial restructuring and uneven regional development in the 1980s in Korea can be seen as a process in which capital attempted with a strong support of the govenment to overcome the crises in the end of 1970s and hence to go on rapid economic growth. In this process, capital, especially monopoly capital concentrated into few conglomerates, pursued both extensive expansion and intensive development of industry simultaneously. In results, the Korean economy could eliminate some of peripheral characters and maturate the Fordist accumulation system. The extensive expansion of the Korean industry in the 1980s was stimulated mainly through the enlargement and adjustment of investment for equipment facilities which was planned to exclude or rationalize traditional light industries on some places, and to continue rapid growth of key heavy-chemical industries, especially of fabricated metal industry, on other places. In this process, keeping mainly the existing developmental axis which polarized the Seoul Metroplitan region and the Southeast region in Korea, the enhancing spatial mobiiity of capital and the further differentiating division of labour enforced a tendency of concentration of all types of industry in the Seoul Metropolitan region, and at the same time provoked the diffusion of some industries over Jeolla and Chungchong regions in a considerable extent. The intensive development of industriai structure in the 1980s was pursued through the strategic encouragement of subcontracting small firms mainly which produced assembling components, the technical enhancement and factory (semi-) automation, and the enrichment of service industries for estate management, finance, distribution and retailing which supported and complemented the production of goods. In this process, enabling capital to extend and elaborate its domination over space through the reorganization of regulating systems, the Fordist division of labour generated a socio-spatial hierarchy in the nation-wide scale that characterized: the Seoul Metropolitan region as an overmaturated (or overarching) Fordist region performing the conceptive functions of management, research and development, in which all types of industry (including service industries) tended to be reconcentrated; Kyungsang region as a maturated Fordist region with excutive branches of large conglomerates and with subcontracting firms around them which produced standardized products through the automized production processes in secialized Fordist industries or rationalized traditional industries; and Jeolla and Chungchong regions as newly devloping Fordist regions with newly migrated branches and some subcontracting small firms-in relatively older Fordist industries or partly rationalized traditional industries. From these analyses, it can be argued that the structural adjustment of the Korean industry in the 1980s, which had carried out both through the extensive expansion and the intensive deveiopment, strengthened further uneven regional development process, even though it appears to have reduced apparently the economic and regional disparity by balancing numerically large and small firms and by extending the Fordist industrial space nation-wideiy. And it seems more persuasive to see that the Korean industrial structure in the 1980s maturated the Fordist system of accumulation, but not yet transformed towards the post-Fordist (or the so-called flexible) accumulation system, even though the Korean economy in the 1990s seems to be under a pressure of restructuring towards the latter system.