Browse > Article
http://dx.doi.org/10.7742/jksr.2022.16.7.825

A Basic Study on Comparative Analysis with Bone using 3D Printer Filament Material  

Kyung-Tae, Kwon (Department of Radiological Science, Dongnam University)
Hui-Min, Jang (Department of Radiological Science, Eulji University)
Publication Information
Journal of the Korean Society of Radiology / v.16, no.7, 2022 , pp. 825-833 More about this Journal
Abstract
In 3D printing technology, materials that can be printed are increasing along with the development of material engineering, and materials that can be used in the field of radiation are also increasing. Therefore, depending on the composition and density of the materials used, the applied field can be different and applied, so the composition and characteristics of the materials must also be considered. In this study, 10 filaments with different properties were selected using a 3D printer of the FDM (Fused Deposition Modeling) method, and the brightness change of each filament was checked using a diagnostic X-ray generator, and the CT number was measured through CT. I wanted to find a material similar to bone. As a result, a material called silicon carbide was found, which has a similar brightness and CT number to bone. It is thought that further research will be presented as basic data for various studies with a density similar to that of human bones.
Keywords
3D Printer; Filamnet; X-ray; CT; CT number;
Citations & Related Records
Times Cited By KSCI : 12  (Citation Analysis)
연도 인용수 순위
1 J. C. Yang, G. H. Park, T. W. Kim, J. I. Ryoo, M. P. Ji, J. O. Kim, "Clinical Features of Percutaneous Hemivertebroplasty in Patients with Osteoporotic Vertebral Compression Fractures", Korean Journal of Neurotrauma, Vol. 9, No. 1, pp. 17-22, 2013. https://doi.org/10.13004/kjnt.2013.9.1.17   DOI
2 S. B. Kim, "Phase-contrast x-ray analysis for three-dimensional diagnosis of spongy bone microvariation in osteoporosis model", Department of ICT Convergence Rehabilitation Engineering, Soonchunhyang University, pp. 9-16, 2020.
3 J. H. Lee, "The Diagnosis of Rheumatologic and Degenerative Arthritis by X-ray Sacroiliac Joint Projection", Journal of the Korean Society of Radiology, Vol. 12, No. 3, pp. 397-402, 2018. https://doi.org/10.7742/jksr.2018.12.3.397   DOI
4 Health Care Big Data Opening System, National Interested Care Behavior Statistics (Simple Fracture), 2017-2021. http://opendata.hira.or.kr/op/opc/olap4thDsInfo.do
5 Y. R. Kim, C. S. Park, "Convergence Study on Diagnostic Agreement between Occurrence of Osteoporosis and Doctor's Diagnosis of Osteoporosis", Journal of Digital Convergence, Vol. 17, No. 1, pp. 281-286, 2019. https://doi.org/10.14400/JDC.2019.17.1.281   DOI
6 B. W. Min, S. H. Jeon, "Operative treatment of symphyseal disruption", The Journal of The Korean Orthopaedic Association, Vol. 35, No. 3, pp. 511-518, 2000.
7 H. H. Park, J. S. Lee, "Image Analysis Using Digital Radiographic Lumbar Spine of Patients with Osteoporosis", The Journal of the Korea Contents Association, Vol. 14, No. 11. pp. 362-369, 2014. https://doi.org/10.5392/JKCA.2014.14.11.362   DOI
8 H. G. Kim, "Evaluation of the Clinical Usefulness of an Assistive Device Fabricated by 3D Printing in an Oblique X-ray Examination of the Lumbar Vertebrae", Journal of the Korean Society of Radiology, Vol. 16, No. 5, pp. 505-512, 2022. https://doi.org/10.7742/jksr.2022.16.5.505   DOI
9 H. T. Jeong, H. Y. Jung, Y. K. Cho, C. H. Kim, Y. R. Kim, "Development of Conductive Polycaprolactone (PCL)-resin based on Reduced Graphene Oxide(rGO)/Polypyrrole (Ppy) composite for 3D-printing application", Journal of Oil & Applied Science, Vol. 35, No. 3, pp. 935-939, 2018. https://doi.org/10.12925/JKOCS.2018.35.3.935   DOI
10 H. Y. Lee, D. H. Kim, "Assessment of Radiation Shielding Ability of Printing Materials Using 3D Printing Technology: FDM 3D Printing Technology", Journal of the Korean Society of Radiology, Vol. 12, No. 7, pp. 909-917, 2018. https://doi.org/10.7742/jksr.2018.12.7.909   DOI
11 S. K. Lee, Y. R. Kim, S. H. Kim, J. H. Kim, "Investigation of the Internal Stress Relaxation in FDM 3D Printing : Annealing Conditions", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 4, pp. 130-136, 2018. https://doi.org/10.14775/ksmpe.2018.17.4.130   DOI
12 S. W. Choi, K. S. Park, T. R. Yoon, "Three-Dimensional Printing Technology in Orthopedic Surgery", Journal of The Korean Orthopaedic Association, Vol. 56, No. 2, pp. 103-116, 2021. https://doi.org/10.4055/jkoa.2021.56.2.103   DOI
13 J. Park, H. Jeon, Y. Oh, K. Park, C. S. Yoon, "Understanding Three-dimensional Printing Technology, Evaluation, and Control of Hazardous Exposure Agents", Journal of Korean Society of Occupational and Environmental Hygiene, Vol. 28, No. 3, pp. 241-256, 2018. https://doi.org/10.15269/JKSOEH.2018.28.3.241   DOI
14 K. A. Kim, S. R. Han, "Evaluation of Mechanical Properties by Process Factors of ABS Specimens for 3D Printing", Journal of the Korean Society of Mechanical Technology, Vol. 23, No. 2, pp. 300-305, 2021. http://doi.org/10.17958/ksmt.23.2.202104.300   DOI
15 K. T. Kwon, H. M. Kang, M. S. Yoon, "Evaluation of the Usefulness of the Transmittance of Metal Filaments Fabricated by 3D Printers in Radiation Therapy", Journal of the Korean Society of Radiology, Vol. 15, No. 7, pp. 965-973, 2021. https://doi.org/10.7742/jksr.2021.15.7.965   DOI
16 J. Lee, K. Y. Choi, S. Y. Hong, "Development of BMD Phantom using 3D Printing", Journal of the Korean Society of Radiology, Vol. 13, No. 2, pp. 185-192, 2019. https://doi.org/10.7742/jksr.2019.13.2.185   DOI
17 H. H. Park, "The Evaluation of Performance and Usability of Bismuth, Tungsten Based Shields", Journal of Radiological Science and Technology, Vol. 41, No. 6. pp. 611-616, 2018. https://doi.org/10.17946/JRST.2018.41.6.611   DOI
18 H. M. Jang, J. Yoon, "Usefulness Evaluation and Fabrication of the Radiation Shield Using 3D Printing Technology", Journal of the Korean Society of Radiology, Vol. 13, No. 7, pp. 1015-1024, 2019. https://doi.org/10.7742/jksr.2019.13.7.1015   DOI
19 K. S. Park, W. J. Choi, D. H. Kim, "Evaluation of Metal Composite Filaments for 3D Printing", Journal of the Korean Society of Radiology, Vol. 15, No. 5, pp. 697-704, 2021. https://doi.org/10.7742/jksr.2021.15.5.697   DOI