• Title/Summary/Keyword: 동기화 모듈

Search Result 138, Processing Time 0.04 seconds

Control Algorithm of Phase Synchronization in Single-Phase Serial UPS Module (단상 직렬 UPS 모듈의 위상동기화 제어 알고리즘)

  • Baek, Seung-Ho;Lee, Soon-Ryung;Lee, Taek-Ki;Won, Chung-yuen
    • Proceedings of the KIPE Conference
    • /
    • 2015.07a
    • /
    • pp.61-62
    • /
    • 2015
  • 본 논문에서는 단상 UPS 모듈을 직렬로 연결 시 모듈간의 위상을 동기화하는 제어 알고리즘을 제안한다. 단상 직렬 모듈 UPS 시스템을 구성할 때, 각 모듈의 위상이 동기화 되어 있지 않는다면 직렬 연결된 출력단을 통해 부하에 불안정한 전력을 공급하게 된다. 따라서 직렬 구성으로 각 모듈의 출력전압 위상을 동기화하여 안정적인 출력전압 제어가 필요하다. 기존에는 CAN통신을 이용했지만 본 논문에서는, Master, Slave 모듈의 PLL 기법을 이용한 순차적인 제어를 통해 위상을 동기화시킬 수 있는 제어 알고리즘을 제안한다. 제안하는 제어 알고리즘은 시뮬레이션을 통해 타당성을 검증하였다.

  • PDF

Synchronization Model for Multimedia Streaming System (멀티미디어 스트리밍 시스템을 위한 동기화 모델)

  • Jung, Kyu-Su;Ryu, In-Ho;Kim, Tae-Hyoung;Kim, Hyoung-Jin
    • Proceedings of the KAIS Fall Conference
    • /
    • 2008.11a
    • /
    • pp.231-235
    • /
    • 2008
  • 본 논문에서는 기존의 멀티미디어 스트리밍 시스템의 복잡하고 확장성이 떨어지는 문제점을 해결하기 위하여 새로운 컴포넌트를 생성하고 조합하여 작업을 동기화 할 수 있는 기법을 제안하였다. 이 기법은 복잡한 멀티미디어 처리 모듈을 단순한 선형적인 구조로 구성하여 버퍼링 모듈, 동기화 모듈, QoS 제어모듈, 비 호환 모듈간의 호환성을 보장하는 어댑터 모듈 등 효과적으로 확장 할 수 있게 설계함으로써 멀티미디어 스트리밍 시스템의 확장성과 이식성이 높아질 수 있도록 하고자 한다.

  • PDF

Design and Implementation of Data Broadcasting Emission System on ATSC (ATSC 기반 데이터 방송 송출 시스템 설계 및 구현)

  • 최지훈;박민식;이용주;최진수;김진웅
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2001.11b
    • /
    • pp.15-19
    • /
    • 2001
  • 본 논문에서는 데이터 방송 송출 시스템 구조와 작동 방법에 관하여 기술한다. 또한 본 시스템을 통하여 다중화되어 전송된 비동기/동기화 비스트림(Non-stream)을 분석하고 데이터 방송 단말 화면에 재생되는 결과에 대하여 서술한다. 본 논문에서는 데이터 방송 서비스를 위하여 프로그램 다중화기 모듈을 변경하지 않고, 비동기/동기화 데이터를 전송할 수 있도록 데이터 인젝터라는 모듈을 개발하였다. 이와 관련하여 데이터 방송 송출 시스템을 제어하는 다중화 관리기/프로그램 스케줄러, 부가 데이터를 MPEG-2 부호화하는 데이터 서버, PSI/PSIP/SDF 테이블을 생성하는 PSIP 서버 모듈과의 연동을 통해 비동기/동기화된 비스트림 데이터를 전송할 수 있도록 데이터 방송 송출 시스템을 구현하였다.

  • PDF

A Version Synchronization Tool for Dynamic Reconfiguration of Application Modules on Sensor Nodes (센서노드상의 응용모듈 동적재구성을 위한 버전동기화 도구)

  • Jung Sun-Woo;Kil A-Ra;Chong Ki-Won
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2006.06c
    • /
    • pp.217-219
    • /
    • 2006
  • 일반적으로 수십 개에서 많게는 수백 수천 개의 센서노드로 구성된 센서네트워크 환경에서 각 노드들은 제한된 저장 공간과 효율적인 에너지자원소비 등의 제약사항을 가지고 있다. 따라서 센서노드에서 응용모듈에 대한 형상관리를 수행하기에는 어려움이 있다. 본 논문은 한국전자통신연구원(ETRI)에서 개발된 나노큐플러스 운영체제(Nano-Qplus OS)기반의 센서네트워크 환경에서 각 노드들의 저장 공간이나 에너지 자원 등의 여러 제약조건을 고려한 버전동기화 도구를 제안한다. 이것은 윈도우즈 기반의 eclipse개발환경과 버전관리도구인 CVSNT와 연동하여 각 응용모듈의 버전을 관리하고, 이를 이용하여 본 논문에서 소개하는 센서노드와 버전정보 저장소간의 버전동기화 도구인 NVSync(Nano-Qplus Version Synchronization)를 사용하여 센서노드의 응용모듈과 동기화함으로써 동적으로 노드들의 응용모듈을 재구성할 수 있게 한다.

  • PDF

Development of Digital Video-EEG Editing System (디지털 영상 뇌파계 편집 시스템 개발)

  • 김새별;이소진;김주한;이용희;김인영;김선일
    • Journal of Biomedical Engineering Research
    • /
    • v.22 no.1
    • /
    • pp.81-90
    • /
    • 2001
  • 본 연구에서는 디지털 영상 뇌파계(digital video electroencephalogram, Digital VEEG)에서 비디오 영상과 뇌전도 파형의 동기화된 편집 시스템을 구성한다. 이 시스템은 기존 아날로그 영상 뇌파계(analog video electroencephalogram)의 동기화 문제와 디지털 영상 시스템에서의 영상편집 문제를 해결하기 위하여 MPEG-I(이하 MPEG) 고압축 기술을 이용한 MPEG 인코딩 보드(encoding board)와 MPEG 편집 엔진(editing engine)을 각각 사용하였다. 시스템은 디지털 영상뇌파계모듈과 디지털 편집 모듈로 구성되며, 뇌전도모듈에서는 환자에게 연결된 전극을 통해 들어온 뇌파를 생체신호증폭기를 이용하여 증폭한 후 AD 보드(analog to digital board)를 이용 디지털화한다. 디지털 카메라로 촬영된 환자영상의 아날로그 영상신호(NTSC 신호)는 MPEG 인코딩 보드를 이용하여 고압축 디지털화한다. 이후 디지털화된 뇌전도신호와 MPEG 형식의 영상을 시간 동기화하여 두 개의 모니터에 각각보여준다. 편집 모듈에서는 영상신호와 뇌파신호를 어느 부분이든 간단한 조작으로 오려 붙이기(cut and paste) 기능을 이용할 수 있다. 본 시스템은 사용된 데이터 모두 디지털 기술을 이용하여 영상과 뇌파신호의 정확한 동기화 및 각각의 데이터의 오려 붙이기 기능을 가능케 하였으며, 이는 환자의 데이터를 관리 및 보관하는데 있어, 임상의에게 의미 있는 자료만을 모아서 효율적으로 관리할 수 있게 해준다. 이와 같은 장점을 갖는 디지 영상뇌파계 편집시스템을 구현하였다.

  • PDF

Design and Implementation of a Session Handler Module for SyncML Data Synchronization Clients (SyncML 자료 동기화 클라이언트를 위한 세션 핸들러 모듈의 설계 및 구현)

  • Ha Byoung-Hoon;Park KeeHyun;Ju HongTaek;Woo Jongjung
    • The KIPS Transactions:PartC
    • /
    • v.12C no.5 s.101
    • /
    • pp.741-748
    • /
    • 2005
  • SyncML is an open standard data synchronization protocol proposed by OMA(Open Mobile Alliance). In this paper, a Session Handler module, one of major modules for developing SyncML data synchronization clients, and a client User Setup program are designed and implemented. The Session Handier Module controls communication sessions, generates header parts of messages exchanged, and determines the legitimacy of incoming messages. In order to justify normal operations of the Session Handler module and the client User Setup program implemented In this paper, they are ported to a Zaurus PDA, which runs on LINUX operating system. In addition, data synchronization operations are performed between the PDA and a Synthesis sever, whose SyncML data synchronization operation is certificated by OMA, Wireless Internet International Standard Forum.

FPGA Implementation of a Pointer Interpreter for SDH/SONET Network Synchronization (SDH와 SONET망의 동기화를 위한 포인터 해석기의 FPGA 구현)

  • 이상훈;박남천;신위재
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.5 no.3
    • /
    • pp.230-235
    • /
    • 2004
  • This paper describes FPGA implementation of a pointer interpreter which can support a synchronization of SDH(or SONET)-based transmission network. The pointer interpreter consists of a pointer-word extractor and a pointer-word interpreter The pointer-word extractor which is composed of mod-6480 counter, shift register and pointer synchronizing block, finds out the H1 and H2 pointer word from a 51.84 Mb/s AU-3/STS-1 data frame and then performs the synchronizing with a 6.48 Mb/s by dividing them in 8. Based on the extracted pointer word, pointer-word interpreter analyzes pointer states such LOP, AIS and NORM according to pointer state-transition algorithm. It consists of a majority vote, a pointer word valid/invalid check, a pointer justification, and a pointer state check. The simulation results of Xilinx Virtex XCV200PQ240 FPGA chip shows the exact pointer word extraction and correct decision of pointer status based on extracted pointer word. The proposed pointer interpreter is suitable for pointer interpretation of 155 Mb/s STM-1/STS-3 frame.

  • PDF

A Design and Implementation of Database and Sync Module for Nurse Informations Svstem Using PDA (PDA를 이용한 간호사 정보 시스템의 데이터베이스 설계 및 싱크 모듈 구현)

  • 김기언;전종훈
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 1999.10a
    • /
    • pp.364-366
    • /
    • 1999
  • 간호사 정보 시스템은 간호사들이 사용하던 기존의 차트 대신에 PDA를 사용하여 의료 정보 데이터의 입력과 조회를 장소와 시간에 구애됨이 없이 항상 가능하게 하며, 위급한 상황이나 바른 임상판단을 요하는 상황의 발생이 빈번한 병원 환경에서 신속한 임상적 의사결정을 도모하기 위해 설계 구현된 시스템이다. 간호사 정보 시스템의 구성요소는 휴대형 정보단말기를 지원하는 이동지원시스템(MSS), 병원정보시스템으로 구성되며 이들의 원활한 연동과 정보 공유를 위해서는 간호사를 위해 특화된 데이터베이스 스키마와 이질적인 스키마간의 동기화 작업을 수행하는 싱크 모듈이 필요하다. 본 논문에서는 간호사 요구사항을 중심으로 MSS와 PDA의 데이터베이스 스키마를 설계하고 구현하였으며 또한, PDA와 MSS의 데이터 동기화 시 PDA와 MSS의 스키마 불일치 때문에 발생하는 복제와 동기화의 문제점을 해결하기 위한 싱크 모듈을 구현하였다.

  • PDF

A Design and Implementation of Synchronization System for Mobile u-GIS (모바일 u-GIS를 위한 동기화 시스템 설계 및 구현)

  • Kim, Hong-Ki;Kim, Dong-Hyun;Cho, Dae-Soo
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2009.05a
    • /
    • pp.588-591
    • /
    • 2009
  • In ubiquitous computing GIS services, it is possible to use the spatio-temporal data anytime through the mobile device. GIS services regularly update use the latest spatio-temporal data to provide the most suitable services. For this situation, update data is distributed to CD or wired networks update services. However, this method has problem to propagate update data to users as taking long time. In this paper, suggests a synchronization system which propagate update data to users for reducing processing time efficiently. This synchronization system collects update data in the field and synchronizes server with collected data to use mobile devices by real time. For this system, I design and materialize synchronization module which updates update data and wireless network module.

  • PDF

Clock Synchronization for Periodic Wakeup in Wireless Sensor Networks (무선 센서 망에서 주기적인 송수신 모듈 활성화를 위한 클락 동기)

  • Kim, Seung-Mok;Park, Tae-Keun
    • Journal of Korea Multimedia Society
    • /
    • v.10 no.3
    • /
    • pp.348-357
    • /
    • 2007
  • One of the major issues in recent researches on wireless sensor networks is to reduce energy consumption of sensor nodes operating with limited battery power, in order to lengthen their lifespan. Among the researches, we are interested in the schemes in which a sensor node periodically turns on and off its radio and requires information on the time when its neighbors will wake up (or turn on). Clock synchronization is essential for wakeup scheduling in such schemes. This paper proposes three methods based on the asynchronous averaging algorithm for clock synchronization in sensor nodes which periodically wake up: (1) a fast clock synchronization method during an initial network construction period, (2) a periodic clock synchronization method for saving energy consumption, and (3) a decision method for switching the operation mode of sensor nodes between the two clock synchronization methods. Through simulation, we analyze maximum clock difference and the number of messages required for clock synchronization.

  • PDF