• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1D
• /
• pp.33-39
• /
• 2012

More and more pavements are suffering from damage these days due to the below-zero winter temperatures and frequent snowfalls. From this research, the freeze-thawing mechanisms of pavements will be observed, and the freeze-thawing resistance of porous asphalt concrete mixture is to be evaluated according to various assessment methods. The investigation was conducted through applying rigid and flexible pavements to freeze-thawing resistance experiments, which include various experiments such as deformation rate measurements, Lottman tests, repeated cyclic freeze-thawing experiments, stripping resistance tests and so on. Test results revealed that the porous asphalt concrete had less deformations according to temperatures compared to dense-graded asphalt concrete due to the 20% void gap. In addition, according to the freeze-thawing repetition experiments which are effected by moisture, the porous asphalt concrete mixture showed superior resistance to repeated cyclic freeze-thawing compared to other asphalt concrete mixtures due to the drainage and the voids within the specimen.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.6 s.58
• /
• pp.126-134
• /
• 2009

Generally, reinforced concrete structures exposed to the outside temperature are affected by freezing and thawing process during winter and early spring. These freeze-thawing process can lead to the reduction in durability of concrete as cracking or surface spalling. This paper is to study the flexural behavior of RC beams exposed to freeze-thawing environments. To compare the difference in flexural behavior of RC Beams, limited tests were conducted under different types of Longitudinal steel ratio and freeze-thawing cycles. For this purpose, fourteen small-scale RC beams ($100mm{\times} 100mm {\times}600mm$) were strengthened in monotonic and cyclic loadings, subjected to up to 150, 300 cycles freeze-thawing from $-18{\sim}4^{\circ}C$. It is thought that experimental results will be used as basic data to evaluate flexural behavior of RC beams exposed to freeze-thawing.

• Proceedings of the KSAR Conference
• /
• 2003.06a
• /
• pp.81-81
• /
• 2003

돼지 정액의 동결보존은 돼지 정자가 내동성이 약한 특성을 가지고 있어 아직 만족할만한 결과를 얻지 못하여 액상정액을 이용하여 인공수정을 실시하고 있는 실정이다. 돼지 정액의 동결보존을 효과적으로 이룩한다면 돼지 인공수정의 효율성을 증대시킬 수 있고, 우수한 종돈의 보호 및 국제적 돼지 품종의 교류를 증진시킬 수 있을 것이다. 본 실험은 돼지 정액 동결시 동결온도와 시간, 항산화제로 알려진 Taurine의 농도별 첨가, 동해보호제 및 융해조건이 돼지 정액의 동결 융해후 생존성에 미치는 영향을 검토하고자 수행되었다.

• Magazine of the Korea Concrete Institute
• /
• v.4 no.3
• /
• pp.157-166
• /
• 1992

해수환경하의 콘크리트 구조물은 동결융해의 반복에 의한 물리적인 침식과 해수중에 용존하는 각종의 이온들의 침투로 인한 화학적 침식에 의해 현저한 성능저하현상을 나타내는 것으로 알려져있다. 본 연구는 포졸란계 혼합재인 플라이 애쉬, 슬래그, 슬리카 흄과 폴리머계 혼합재인 Ethylene Vinyl Acetate(EVA), Styrene-Butadiene Rubber(SBR)를 사용하여 제조한 콘크리트 경화체의 해수환 경하에서 동결융해 저항성에 미치는 혼합재의 종류 및 첨가량의 영향, W/C의 영향을 비교 검토한 실험적 연구이다. 콘크리트의 동결융해 저항성을 위해서는 공기연행이 필수적이며, 공기연행시킨 경우 W/C가 낮을수록 동결융해 저항성이 우수하였다. 해수중에서의 동결융해 저항성은 슬래그분말을 첨가할 때 우수하였으며, 폴리머계 혼합재에서는 EVA가 우수한 결과를 나타내었다.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.75-75
• /
• 2001

유리화 동결법은 동결중 ice crystal의 형성이 이루어지지 않으므로 난자의 동결보존을 위한 유용한 동결방법이다. 이전의 연구에서 마우스의 난자를 ethylene glycol과 electron microscope grid를 이용한 유리화 동결법으로 동결 융해한 결과 기존의 slow freezing 방법에서보다 높은 생존율과 배발달율이 나타남을 관찰하였다. 그러나 동물과 인간 난자를 이용한 연구를 통하여 난자의 경우 동결 융해후 염색체에 부착되어 있는 미세소관인 방추사가 온도의 변화에 매우 민감하여 염색체 이상성이 증가되는 것이 보고되었다. 이에 본 연구에서는 성숙난자를 유리화동결법에 의해 동결 융해후 난자의 염색체와 방추사의 이상성이 증가되는지 알아보고자 본 실험을 수행하였다. ICR mouse의 성숙란을 채취하여 연구목적에 따라 fresh한 대조군과 동결음해 시킨 실험군으로 분류하였다. 동결방법은 난자를 1.5 M ethylene glycol (EG)에 2분 30초간 노출 시킨후 5.5 M EG와 1M sucrose가 첨가된 동결액에 20초간 노출시킨 후 Grid에 난자를 부착시킨 후 직접 액체질소에 침지하여 동결하였다. 동결후 난자는 5단계로 융해를 실시한 후 생존된 난자는 tubulin 항체를 이용한 immunostaining 방법으로 방추사의 이상성을 관찰하였고, 염색체는 난자를 고정 후 10% Giemza로 염색 후 염색체의 수적인 이상성을 관찰하였다. 염색체 분석결과 염색체 이상 빈도는 대조군의 경우 19.6%, 동결융해군은 32.8%로 관찰되었다. 또 방추사의 이상빈도는 대조군의 경우 20.2%, 동결 융해군은 32.3%로 관찰되어 동결 융해후의 난자에서 염색체와 방추사의 이상 빈도가 증가됨이 관찰되었다.찰되었다. 배아이식후 대조군과 실험군에서 각각 2 마리가 임신이되어 정상적인 산자를 분만하였다. 따라서 항동해제에 taxol의 첨가는 동결 융해후의 난자의 배발달율을 증진시킬 수 있었다..8%로 나타나 난할율 및 배반포 발생율에 있어서 융합조건에 따라 큰 차이는 없었으나 1.9㎸/cm, 30$\mu\textrm{s}$ 2회의 조건이 다른 조건들에 비하여 유의적으로 낮았다. 따라서, 체세포와 수핵란 세포질간의 융합율과 배반포 발생에 미치는 영향은 전압보다는 시간에 더 크게 받음을 알 수 있었으며, 이와 같은 결과에서 융합시 시간을 오래 주는 것보다 전압을 높이는 것이 수핵난자의 세포질에 상해를 줄이고 이후 배반포 발생에 유리할 것으로 사료되었다.면에서도 더욱 더 활발할 것으로 기대된다. 배란후 72시간째에 초음파진단기를 이용하여 난소의 난포발달을 조사한 결과 , 대조구와 bFF처리구에 비해 AI처리구에서 발달난포가 유의적으로 많은 것을 확인하였다. 이상과 같은 결과로, Anti-inhibin serum은 한우 자체에서 분비하는 Inhibin을 특이하게 억제하여 Inhibin에 의해 억제되는 FSH분비가 촉진됨으로써 난포발달과 estrogen의 농도가 촉진되는 것으로 사료되어 anti-inhibin serum이 한우의 과배란유기 효과가 있는 것으로 사료된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성 물질로 증착시키지 않고, Silver Paint 에 시편을 접착하는 방법으로도 만족한 시험 결과를 얻을 수 있었다.째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.25-28
• /
• 2008

Generally, reinforced concrete structures exposed to the outside temperature are affected by freezing and thawing process during winter and early spring. These freezing and thawing process can lead to the reduction in durability of concrete as cracking or surface spalling. This paper is to study the hysteretic behavior of RC beams exposed to freezing and thawing under cyclic loadings. To compare the difference in hysteretic behavior of RC Beams, limited tests were conducted under different types of damage and freezing and thawing cycles. For this purpose, six specimens were tested. It is thought that experimental results will be used as basic data to evaluate hysteretic behavior of RC beams exposed to freezing and thawing.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.5
• /
• pp.399-405
• /
• 2010

The accumulated displacements and fatigues of rock are increased by the stress-hysteresis, induced from repeated frost-thawing. Also the shear strength is decreased by them continuously. The stress-hysteresis is affected by the atmospheric temperature changes, whose behavior is visco-elasticity, usually. Therefore, to do ideal body analysis, Kelvin model could be used to analyze the frost-thawing behavior in winter. In general, rock slope failure occurs by the deterioration of rocks, which is caused by the repetition of freezing-thawing process. In order to keep the safety of such rock mass structures the deterioration process of rock needs to be described quantitatively using some meaningful parameters. In this work, the deterioration process in freezing-thawing cycle of tuff, which is a famous soft porous rock, is investigated through laboratory tests and successfully described as a differential equation for the change of porosity. And then, the deterioration of the mechanical properties of rock, such as Young's modulus and uniaxial compressive strength, are quantitatively described as a function of the porosity.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.6
• /
• pp.73-81
• /
• 2012

Concrete structures are commonly exposed to freezing-thawing condition. This freezing-thawing action changes the pore structure of concrete, and it can reduce the durability of concrete. In this study, the change of the internal pore structure and durability of concrete due to freezing-thawing action are investigated. According to results, the excellent durability records were reported by the existing evaluation methods for all mixes. However, the pores, 50~100nm size in diameter, are increased in concrete specimens exposed to freezing-thawing action, and the chloride penetration resistance was significantly reduced. The linear relationship between pore structure and chloride penetration resistance was shown in water cured concrete. Meanwhile, the linear relationship was decreased when concrete is exposed to freezing-thawing condition. It is desirable to review the criterion of durability evaluation for concrete specimens exposed to freezing-fthawing and chloride attack condition, simultaneously.

• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.399-407
• /
• 2010

The flexural behaviors of two types of beam members exposed to freeze-thaw cycles were evaluated. This study aims to examine the effect of freeze-thaw cycles on the behavior characteristics of reinforced concrete (RC) beams. For the purpose, a part of the beam specimens were damaged until yielding of tension reinforcement was reached, before they were exposed to 150 and 300 cycles of freeze-thaw. Cyclic tests, as well as monotonic tests, were conducted to evaluate the stiffness degradation characteristics when same cycle is repeated. The material tests showed that relative dynamic modulus of concrete exposed to 300 cycles of freeze-thaw moderately decreased to 86.8% of normal concrete, indicating that concrete used in this study has good durability against freeze and thaw damage. The results of monotonic tests showed reduction of flexural strength, ductility and stiffness of the beam specimens exposed to freeze-thaw cycles compared with those of the control speciments. In particular, BDF13 specimens, which had been subjected to artificial cracking damage, did not showed enough flexural strength to satisfy nominal moment required by current concrete structure design code. In the monotonic tests results, BF75 specimens exposed to freeze-thaw cycles showed 10% or more cyclic stiffness degradation. Therefore, it was thought that deformation of concrete in compression have to be considered in design process of members under cyclic load, such as seismic device.

• Journal of the Korea Concrete Institute
• /
• v.23 no.1
• /
• pp.23-30
• /
• 2011

In this study, deterioration degrees of concrete were investigated at laboratory under seawater attack and cycling freeze-thaw, which are major durability performance deterioration factors of concrete. Deteriorations of mixed concrete using Portland & blended cement were examined by instrumental analysis of changes in relative dynamic modulus of elasticity and compressive strength. After 520 cycles of freeze-thaw, relative dynamic modulus of elasticity and compressive strength of concrete mixed with normal Portland and LHC over 75% showed relatively low resistance of approximately 44% of those values of SRC. Concrete replaced with 50% fine powder of blast furnace slag showed the most excellent freeze-thaw resistance among the tested blended cement concrete.