• Journal of Mushroom
• /
• v.18 no.1
• /
• pp.37-44
• /
• 2020

The antioxidant activities and β-glucan contents of hot-water extracts of the eggs and fruiting bodies of Phallus indusiatus were investigated using different drying methods, and the amino acid contents as nutritional components of the eggs and fruiting bodies of P. indusiatus were analyzed. DPPH radical scavenging and nitrite scavenging activities of hot-water extracts of the eggs of P. indusiatus obtained after hot-air drying were 59.4% and 15.6%, respectively, at 1 mg/ml concentrations, which showed higher activities than those of freeze dried samples. Total polyphenol and β-glucan contents in hot-air-dried hot-water extracts of the eggs of P. indusiatus were 8.25 mg GAE/g and 45.9%, respectively, which were the highest among all samples. Additionally, 17 amino acids were detected from the hot-water extracts of the eggs and fruiting bodies of P. indusiatus, and the amino acid contents were higher in the eggs than in the fruiting bodies. Cysteine, phenylalanine, and glutamic acid were the most abundant essential and non-essential amino acids in the analyzed extracts. The results of this study showed that the physiological activities of the antioxidants from P. indusiatus, well known as wild edible mushroom, were greater when extracted from the dried samples. Further, the amino acid contents were higher in the egg extracts than in the extracts from the fruiting bodies of P. indusiatus.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.8 no.2
• /
• pp.187-198
• /
• 2003

High-resolution (Chirp, 3-11 kHz) echo facies and sedimentary facies of piston-core sediments were analyzed to reveal the late Quaternary depositional processes in the Korea Plateau and Ulleung Interplain Gap. The Korea Plateau is an Isolated topographic high with a very restricted input of terrigenous sediments, and its slope is characterized by a thin sediment cover and various-scale submarine canyons and valleys. Echo and sedimentary facies suggest that the plateau has been moulded mainly by persistent (hemi) pelagic sedimentation and intermittent settling of volcanic ashes. Sediments on the plateau slope and steep margins of ridges and seamounts were reworked by earthquake-induced, large-scale slope failures accompanied by slides, slumps and debris flows. As major fraction of the reworked sediments consists of (hemi) pelagic clay particles, large amounts of sediments released from mass flows were easily suspended to form turbid nepheloid layers rather than bottom-hugging turbidity currents, which flowed further downslope through the submarine canyons and spreaded over the Ulleung Basin plain. In the Ulleung Interplain Gap, sediments were introduced mainly by (hemi) pelagic settling and subordinate episodic mass flows (turbidity currents and debris flows) along the submarine channels from the slopes of the Oki Bank and Dok Island. The sediments in the Ulleung Interplain Channel and its margin were actively eroded and reworked by the deep water flow from the Japan Basin.

• Applied Microscopy
• /
• v.35 no.4
• /
• pp.74-83
• /
• 2005

The ontogeny of pollen wall in Panax ginseng was studied with transmission and scanning electron microscopy from early tetrad stage until pollen maturity. Initial indication of exine development is undulation of plasma membrane for the preparation of bacular mound. The first recognizable structure of the pollen wall is the cellulosic primexine which is formed outside of the plasma membrane while microspore tetrads are still surrounded by callose wall. As development proceeds, foot-layer and baculum differentiation, callose dissolution and exine formation were progressed. During this process, sporopollenin is deposited into the exine, and then endexine development was followed. The intine, innermost pollen wall layer, is developing form hypertrophic Golgi vesicles. The thickness of exine is very even on all along the pollen wall, but intine thickness of apertural region is thicker than that of nonapertural region. Mature pollen of ginseng is $20{\mu}m$ in size, tricolpate and shows fine reticulate sculpturing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.539-539
• /
• 2008

본 논문에서는 투명전도박막의 균일한 표면특성을 확보하기 위해 광역평탄화 공정을 적용하여 투명전도 박막의 표면 거칠기를 연구하였으며 슬러리의 종류에 따른 박막의 연마특성을 연구하였다. 본 실험에서 사용된 ITO 박막은 RF Sputtering에 의해 제작되었고 하부 기판은 석영 Glass가 사용되었다. 광역평탄화를 위한 CMP 공정은 고분자 물질계열의 패드위에 슬러리입자를 공급하고 웨이퍼 캐리어에 하중을 가하며 웨이퍼의 표면을 연마하는 방법으로 가공물을 탄성패드에 누르면서 상대 운동시켜 가공물과 친화력이 우수한 부식액으로 화학적 제거를 함과 동시에 초미립자로 기계적 제거를 하는 것이다. ITO 박막의 평탄화를 위한 공정조건은 Polisher pressure 300 g/$cm^2$, 슬러리 유속 80 ml/min, 플레이튼속도 60 rpm으로 하였다. 위의 조건에 따라 공정을 진행 후 연마특성을 측정하였으며 이때 사용된 슬러리는 산화막에 사용되는 실리카슬러리와 금속연마용 슬러리인 EPL을 사용하였다. 연마율은 실리카 슬러리가 EPL슬러리에 비해 높음을 확인 하였다. CMP 공정에 의해 평탄화를 수행 할 경우 실리카슬러리와 EPL슬러리 모두 CMP전에 비해 돌출된 힐록들이 감소되었음을 알 수 있었다. 비균일도 특성은 모든 슬러리가 양호한 특성을 나타내었다. 평탄화된 박막의 표면과 거칠기 특성은 AFM(XE-200, PSIA Company) 을 이용하여 분석을 하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.5
• /
• pp.601-608
• /
• 2019

In this study, the effect of hull appendages on the high-speed catamarans with reverse bow shapes is compared and analyzed by numerical analysis and circulating water tank model test. The reverse bow shape showed an improved wave shape by shifting the generation position of forward divergent wave to the stern direction and was effective in resistance and stable running posture (Kim et al., 2019). In the model test results of the running performance as the wave patterns and the change of the running posture due to the fin fitted with the inner side of the inverted bow and the interceptor, 1) Trim characteristics of the inverted bow 2) Improvement of superposition of inner wave by Fin 3) The trim control by the fin and the interceptor is considered to be effective in reducing the impact of the two hull connection decks (wetdeck).

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.4
• /
• pp.321-336
• /
• 2012

The shear behavior at the particle/surface interface such as rock joint can determine the mechanical behavior of whole structure. Therefore, a fundamental understanding of the mechanisms governing its behavior and accurately estimation of the interface strength is essential. In this paper, PFC, a numerical analysis program of discrete element method was used to investigate the effects of the surface roughness crushing on interface strength. The surface roughness was characterized by smooth, intermediate, and rough surface, respectively. Particle shape was classified into one ball model of circular shape and 3 ball model of triangular shape. The surface shape was modelled by wall model of non-crushing surface and ball model of crushing surface. The results showed that as the bonding strength of ball model decreases, lower interface strength is induced. After the surface roughness crushing was occurred, the interface strength tended to converge and higher bonding strength induced lower surface roughness crushing. Higher friction angle was induced in wall model and higher surface roughness induced the higher friction angle. From these findings, it is verified that the surface roughness and surface roughness crushing effect on the particle/surface interface shear behavior.

• Applied Microscopy
• /
• v.29 no.4
• /
• pp.437-450
• /
• 1999

Bile canaliculi are the structure delivering bile secreted by hepatocytes into the bile passage. Bile secretion is mainly controlled by the cytoskeletal elements, mainly of actin in the microvilli, pericanalicular web. Most studies on the bile secretion have been done in viva situation, however, to control the various parameters in vitro culture system seem to be more useful. To set up an in vitro experimental system, the investigator isolated hepatocytes with an enzymatic method using a mixture of collagenase and hyaluronidase from normal Sprague-Dawley rat liver and cultured. Isolated hepatocytes were round and formed cords in culture. Microvilli covered the whole surface of hepatocytes. Bile canaliculi were formed between hepatocytes and were characterized by the presence of microvilli of various lengths and shapes mainly arising from small surface mounds. Actin filament core in the microvilli and pericanalicular actin web were incomplete. After cytochalasin D treatment, cultured hepatocytes were round but the surface were irregular with surfacen blebs, folds and grooves. Microvilli on the surface were scarce. Bile canaliculi were markedly dilated often with the detached junctional complexes. Bile canaliculi lacks microvilli almost completely and extended into the pericanalirular cytoplasm showing complex vacuolar and tubular structures by transmission electron mciroscopy. Pericanalicular actin web, intermediate filaments were hardly identified. Subsurface actin filaments were scattered scarcely under the cell membranes. These results suggest that hepatocytes isolated from rats can survive and form bile canaliculi in culture and the actin filaments are involved in the formation and/or maintenance of the bile canaliculi.

• 한국해양학회지
• /
• v.7 no.2
• /
• pp.74-85
• /
• 1972

This paper studied the grain size distribution of bottom sediments of Yeongil Bay which is located at the southeastern part of the Korean Peninsula. Sixty four samples collected with snapper and dredger are analyzed by roe Tap Sieve Shaker and Pipette Method. The moment parameters are calculated with the method of Friedman(1961). Most samples are composed of sand size sediments and a few samples are composed of silt and clay. The Yeongil Bay can be divided into gravel-granule zone, sand zone, and silt-clay zone. The sediments near Yeonam- Dong and Hyongsan river are moderately sorted and others are very poorly sorted according to scheme of Friedman91962). In general, sorting values are ranged from 1.0 to 3.5. The samples near Janggigap and Masin-Dong show negative and others show positive skewness values. Skewness values are ranged from -1 to 2. All samples show the leptokurtic distribution except for the samples near Masin- dong and at the deepest place near Janggigap. Kurtosis values are ranged from -1.5 to 21.9. The samples of gravel-granule zone contain more than 50% and those of silt-clay zone contain less than 50% of CaCO$\_$3/. Four different colors, black, yellow, brown and gray, are shown in the sediments of Yeongil Bay.

• The Journal of the Korean bone and joint tumor society
• /
• v.14 no.2
• /
• pp.95-105
• /
• 2008

Purpose: To identify which is the best procedure in recycling autograft according to the resection & reconstruction type and recycling methods, and so when the recycling autograft is used in limb salvage surgery. Materials and Methods: We have treated fifty-eight patients (34 male, 24 female; age range 5 to 74 years, mean age 36.5 years), who had the malignant musculoskeletal tumors, with recycling autograft (47 patients with extracoporeal irradiation, 11 patients with pasteurization) from December 1995 to February 2006. The resection and reconstruction type was 3 cases with fragmentary, 8 intercalary, 23 rAPC (recycling-Autograft-Prosthesis composite), 18 osteoarticular, 5 total joint and 1 soft tissue (achilles tendon). The result was evaluated by the radiologic union at junctional site, the functional score by musculoskeletal tumor society score and complications according to the resection & reconstruction type and recycling methods. Results: The junctional union was obtained at 15.0 months in extracoporeal irradiation and 12.6 months in pasteurization. Also the mean radiologic union was shown at 6.0 months in fragmentary, 12.8 months in intercalary, 10 months in rAPC, 23.3 months in osteoarticular and 15.6 months in total joint. The functional score was 65.5% in fragmentary, 60.8% in intercalary, 62.8% in APC (except pelvis), 66.0% in osteoarticular and 66.6% in total joint. We have experienced 1 infection, 1 prutrusio acetabuli in pasteurization (18.1%) and other 22 complications (3 deep infections, 8 nonunions, 2 fractures, 2 epiphyseal problems, 5 joint instabilities, 2 local recurrence) in extracoporeal irradiation (46.8%). Also we have experienced 3 complications (3 nonunions) in intercalary (37.5%), 9 complications (4 nonunions, 1 deep infection, 1 periprosthetic fracture, 1 epiphyseal problem, 1 local recurrence, 1 protrusio acetabuli) in rAPC (50.0%), 6 complications (2 deep infections, 2 nonunions, 1 epiphyseal problem, 1 pathologic fracture) in osteoarticular (33.3%), 5 complications (5 joint instabilities) in total joint (100%) and 1 complication(1 local recurrence) in soft tissue (100%). Conclusion: In our experience, according to the resection & reconstruction type fragmentary and intercalary may have several advantages such as good radiologic and functional result and low rate of complication. And it seems that rAPC was available in case which have no sufficient residual bone stock. Also the pasteurization may have more advantages than that of the extracorporeal irradiation.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.1
• /
• pp.42-51
• /
• 2022

Esthetic restoration of maxillary anterior implant heavily depends on the direction of installation of implant fixture. In patients with malpositioned implant, it is crucial to communicate the limitations of prosthetic outcome with the patient before starting on a restoration. To facilitate the communication, three-dimensional virtual representation by superimposing facial and intraoral digital scans with Computed Tomography (CT, dicom file) was used for visualization of the limitations of prosthesis. Through digital diagnostic wax-up, the profile of right maxillary anterior incisor implant was expected to be protrusive, which the patient was not satisfied with. Since the patient already had done root canal treatment on left maxillary anterior incisor due to previous trauma, a new prosthetic design including both right and left maxillary anterior incisors was presented to the patient. The second design was chosen and his comments were delivered to dental lab. The patient was satisfied with the new prosthesis, aesthetically and functionally.