• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.1-9
• /
• 2014

Improving the earthquake resistance of buildings through seismic retrofitting using steel braces can result in brittle failure at the connection between the brace and the building, as well as buckling failure of the braces. In this study, a non-compression cross-bracing system using the Carbon Fiber Composite Cable (CFCC), which consists of CFCC bracing and bolt connection was proposed to replace the conventional steel bracing. This paper presented the seismic resistance of a reinforced concrete frame strengthened using CFCC X-bracing. Cyclic loading tests were carried out, and the maximum load carrying capacity and ductility were investigated, together with hysteresis of the lateral load-drift relations. Test results revealed that the CFCC X-bracing system installed RC frames enhanced markedly the strength capacity and no buckling failure of the bracing was observed.

• Journal of the Korean earth science society
• /
• v.26 no.6
• /
• pp.584-596
• /
• 2005

Morphology, surface sediments, sedimentation rates and sea-cliff erosion have been monitored, for one year to investigate the shoreline changes and tidal beach characteristics in Cheonsu Bay along the west coast of Korea. The seacliff of the bay consists of intensively weathered sedimentary rocks and soft soil, showing an erosion range of $-58.9\~73.3cm/yr$ by a weak wave forcing. Active sea-cliff erosions are recognized by peculiar geomorphic features, including saw teeth-shaped coastline, gravels, relict weathered basement-rock and 'Island Stack' exposed on the high-tide beach surface. The beach sediments show low compositional maturity at the south and north headlands and gradually high towards the central part. This observation seems to be caused by the fact that beach sediments are to originate from the both headlands in the study area and then transported by long-shore current associated with a wave action.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.191-202
• /
• 2007

In these days, open signboard system is controlled by administrative policy and law, but there is no consideration for different types of building. As such, this study aims to propose planning criteria for streetside commercial buildings, such as elevation and mass design of buildings, layout of signboard attached to the building elevation with consideration for streetscape. In mass planning for streetside commercial buildings, the building type with front open space keeps lower open signboard density than the building type directly leading to the street. It is desirable that open signboard of lower floor part is attached by a horizontal type, open signboard of low medium floor part by a projected vertical type, open signboard of high medium floor part and roof part with a minumum attachment of open signboard. As for elevation planning relative to open signboard, it is desirable that an irregular wall type is more useful than a regular wall type to control open signboard. And in all cases, horizontal element facade has a handicap to control the quantity of signboard. If the building has a corner, the piloti should be used in the corner of lower story for smooth circulation of pedestrians and emphasizing the transparency of elevation. Specially, in the case of a round corner, the corner should be emphasized by the composition of high transparent mass.

• The Journal of the Korea Contents Association
• /
• v.21 no.2
• /
• pp.520-527
• /
• 2021

In this study, we focused on the low practicality of traditional outdoor advertisements due to uniformity of materials, shapes, and designs, so in order to improve it, we will analyze impact on the practicality of outdoor advertisements depends on the attached type of advertising signboards. The research method is to set up a research model and hypotheses through a literature review and conduct a survey and then perform factor analysis and hierarchical regression analysis. Hypothesis1. The evaluation factors (readability, formability or symbolism) of outdoor advertising signboard in traditional markets will affect their practicality. Hypothesis 2. The type of attached advertising signboards (protruding type or wall-type) in traditional markets will control the impact of each evaluation factors' on practicality. In a result, readability and formability will affect practicality. To increase practicality, the size, color, font, layout and etc. of outdoor advertising signboards should be well recognized to get the better understanding. Also, practicality will be increased by the harmonization and the sense of balance.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.5
• /
• pp.373-379
• /
• 2015

Side Scan Sonar (SSS) is capable of acquiring real-time data for seabed scouring, bathymetry, mine countermeasurement, etc. In a shipyard, an SSS package is utilized to measure the water depth and find debris in the sea because a sufficient water depth and non-interruption have to be ensured before implementing an underwater installation such as a large thruster. This paper presents the application and operation method of an SSS for the construction of an offshore project.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.32.2-32.2
• /
• 2009

높은 효율성을 가지는 전계방출 디스플레이(field emission displays)를 개발하기 위해 탄소나노튜브 음극소자 (CNT cathodes)의 표면처리에 대한 연구가 활발히 진행되고 있다. 열처리가 끝난 탄소나노튜브 음극소자(CNT cathodes)의 표면에는 유기성 바인더들이 타면서 잔여물들이 생성되게 되는데 이러한 잔여물들은 전계방출을 하는데 있어서 방해요소가 된다. 전계방출이 용이하게 하기 위해서는 이러한 잔여물들을 효과적으로 제거해 주어야한다. 표면처리의 방법으로는 여러 가지가 존재하는데 그중에서 테이핑 방법을 이용한 표면처리는 열처리 후에 남은 잔여물들을 제거하면서 CNTs를 돌출시키는 효율적인 방법이다. 하지만 이러한 테이핑 방법으로도 완벽하게 잔여물을 제거하기란 쉽지 않다. 본 연구는 첫 번째 열처리가 끝난 시편을 테이핑 방법을 이용하여 표면 처리를 실시하고 그것으로 끝나는 것이 아니라 표면처리가 끝난 시편에 두 번째 열처리를 실시하여 탄소나노튜브 음극소자(CNT cathodes)에 남아있는 잔여물들을 좀 더 효과적으로 제거해 주는데 그 목적이 있다. 재열처리시 온도는 $330^{\circ}C$ ~ $420^{\circ}C$까지 $30^{\circ}C$의 차이를 주어 4단계에 걸쳐 실험을 실시하였고 재열저리를 하기전과 재열처리를 실행한 후의 전류밀도의 차이를 관찰하여 효과적으로 잔여물들이 제거되었는지에 대해서 알아보았다. 재열처리를 실행하였을 때 재열처리를 하기 전에 비하여 전류밀도에서 우월하였으며 $360^{\circ}C$ 부근에서 가장 많은 차이를 보였다.

• Parasites, Hosts and Diseases
• /
• v.23 no.2
• /
• pp.203-213
• /
• 1985

The in situ posture of anterior body of Metagonimus yokogawai was observed in experimental metagonimiasis of dog. The metacercariae were collected from naturally infected sweetfish by peptic digestion; a total of 8 dogs was orally infected with 10,000 metacercariae respectively. Two dogs were killed on 3 days, 9 days, 4 weeks and 10 weeks after the infection. The postures of worms in histological section of small intestine and of whole worms collected from the fixed intestinal mucosa were examined by light and scanning electron microscope. The results were summarized as follows: 1. The recovery rates of worms were 42.6% on 3 days, 55.0% on 9 days, 33.2% on 4 weeks and 9. 8% on 10 weeks after the infection respectively. 2. In histological sections of small intestine, most of worms were found at intervillous spaces as ovoid sections of posterior body. However, many worms, especially in 3 day-old worms, revealed protruded anterior body in glandular lumens of crypt. Some sections of anterior body were bifurcated or sacculated. 3. The worms collected from fixed intestinal mucosa under dissecting microscope exhibited a variety of postures. Many worms showed flat shapes with a concavity or curvatures. However, in many worms, the anterior body made a single or multiple protrusions. 4. By SEM observation of protruded anterior body, a longitudinal groove was found. 5. The frequency of worms with protruded anterior body decreased in 9 days, 4 weeks and 10 weeks than in 3 day-old worms. The above findings indicated that the anterior body of juvenile and adult M. yokogawai protruded to lumens of glandular crypt by folding their lateral portions to make a reversible tubelike structure. Frequent multiple protrusions were considered to be made to adapt the microniche of glandular crypts of dog intestine.

• Journal of the Korean Institute of Gas
• /
• v.17 no.6
• /
• pp.52-57
• /
• 2013

In this study, the strain energy density, stress and deformation behaviors have been analyzed as functions of a thickness and a force area of protective helmets with and without an extruder on the top of the shell structure using the finite element method. The strain energy density in which is related to the absorption capacity of an impact energy transfer is one of a key element of the helmet safety. The FEM analyzed results show that when the impulsive force of 4,540N is applied on the top surface of the helmets, the maximum stress is linearly reduced for an increased area of impact forces. But, the maximum strain energy density has been reduced for the increased force area. The reduced strain energy density may increase the impulsive forces transferred to the head and neck of helmet wearers, which may decrease the impact energy absorption safety of the helmets. In thus, it is safer design of the helmet in which has an extruded structure on the summit surface, but the modified helmet may decrease the impact energy absorption capacity.

• Applied Microscopy
• /
• v.30 no.4
• /
• pp.321-326
• /
• 2000

The ultrastructure of the fertilized egg envelope from pale chub , Zacco platypus belong to Cyprinidae was studied using scanning and transmission electron microscopes. The fertilized egg was an adhesive type, have a single micropyle resembling the pathway of sperm in the area of the animal pole. The micropyle was surrounded by 5 peaks of hill. An outer surface of the fertilized egg envelope was arranged by pore canals irregularly. In section of fertilized egg, the egg envelope consistes of three layers, an outer adhesive layer, a middle electron dense layer and an inner lamellae layer consisting of 9 layers. These ultrastructural characters of fertilized egg envelope from pale chub can be utilized in taxonomy of teleost.

• The Korea Swine Journal
• /
• v.18 no.6 s.202
• /
• pp.139-141
• /
• 1996

한국 축산업 발전을 위하여 축산물 자유화를 눈앞에 두고 농수산부에서는 국민건강 안전과 소비자들의 기호에 맞는 고급육 생산을 위하여 육류에 항생제 잔류물 없애기와 각종 세균수 줄이기에 앞다투어 노력하고 실행할 방침을 제시해 놓았고 그렇게 되도록 전국 양축가와 도축장 및 육가공육류 해체작업장이며 유통업무에 종사한 도소매상인들에 최고의 기술과 고뇌에 짜낸 결실을 기대하고 있던차 모든 과제의 원인제공인 가축질병박멸대책을 위해 여러 학계교수, 수의학전문의, 생산자단체, 축산업에 일생을 맡겨 분투해온 분들로 위원회를 구성하여 가축질병박멸대책안을 만들어 수차례의 협의끝에 그런대로의 최선과 최대의 안이 나와 곧 발표단계며 곧바로 시행에 들어갈 것이다. 한편은 걱정도 있다. 시행하다보면 다시 손질해야할 점도 돌출될 것이며 전국 양축가들이 값비싼 사료로 가축에게 100%의 결실이 있게 된다면 얼마나 좋겠는가? 좋은 결실을 위한 노력이니 좋은 열매가 하루속히 이루어질 것으로 믿는다.