• Journal of Korean Society of Transportation
• /
• v.20 no.2
• /
• pp.47-58
• /
• 2002

This thesis is based on the speed variations which are observed both in a sing1e tunnel and a continuous tunnel. Kumdae II tunnel and Chiak I tunnel of Jungang Expressway are selected in order to analyze the characteristics of speed variations according to tunnel intervals I place importance on the computation of tunnel intervals according to the speed variations. there's a summary of the results. The results of the study reveal that speed changes occur both on 1km ahead of tunnel and within the tunnel. The speed change amounts to 7.1km/hr(6.7%) on these survey Points 2.7km/hr (2.9%) on access points, and from -3.6km/hr (-3.8%) to, +4.1km/hr(+4.7%) irregularly on egress points. The magnitude of speed chance appears small on the survey points where an interval of tunnel is short whereas the speed chance turn out to be rather significant on the points where the tunnel interval is long. The analysis of tunnel distances using multiple regression models shows that the appropriate tunnel distance turns out to be 732m. The distance of 732m seem to be providing a fecundation for uniform traffic flow in continuous tunnel conditions.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.145-154
• /
• 2012

This paper analyzed the characteristics of traffic accidents in all tunnels on nationwide freeways and selected some various independent variables related to accident occurrence in tunnels. The study aims to develop reliable accident forecasting models using the various dependent variables such as the number of accident (no.), no./km, and no./MVK. Finally, reliable multiple linear regression models were proposed in this paper. This study tested the validity verification of developed models through statistics such as $R^2$, F values, multicollinearity, residual analysis. The paper selected the accident forecasting models considering the characteristics of tunnel accidents and two models were finally proposed according to two groups of tunnel length. In the selected models, natural logarithm of ln(no./MVK) is used for the dependent variable and AADT, vertical slope, and tunnel hight are used for the independent variables. The reliability of two models was proved by the comparison analysis between field data and estimating data using RMSE and MAE. These models may be not only effective in evaluating tunnel safety under design and planning phases of tunnel but also useful to reduce traffic accidents in tunnels and to manage the traffic flow of tunnel.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.2
• /
• pp.115-131
• /
• 2011

Recently, considering the aspects of disaster prevention and environmental damage, the construction of a twin tunnel is increasing. When constructing a twin tunnel, the stresses are concentrated at the pillar so that stability of the tunnel is decreased. Since the previous studies on the behavior of a twin tunnel pillar are mainly restricted to the estimation of the tunnel behavior and the analysis of surface settlement, there is a limit to a quantitative stability estimation of the pillar. Therefore, it was quantitatively investigated how the pillar width of a twin tunnel affects its stability. To ensure this end, global tunnel safety factors obtained numerically using shear strength reduction technique, local safety factors of a pillar using the equation that Matsuda et al. suggested, and strength/stress ratios of the pillar were estimated and their results were analyzed for two sections with different rock covers. For a reasonable design of a twin tunnel pillar, it was turned out that strength/stress ratio, the local pillar safety factor, and global tunnel safety factor should be used interrelatedly rather than independently.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.3
• /
• pp.247-258
• /
• 2004

Two 3-dimensional data processing techniques to predict the fractured zone ahead of a tunnel face by the tunnel seismic survey were proposed so that the geometric formation of the fractured zone could be estimated. The first 3-dimensional data processing technique was developed based on the principle of ellipsoid, The input data needed for the 3D migration can be obtained from the 2-dimensional tunnel seismic prediction (TSP) test where the TSP test should be performed in each sidewall of a tunnel. The second 3-dimensional migration technique that was developed based on the concept of wave travel plane was proposed. This technique can be applied when the TSP is operated with sources in one sidewall of a tunnel while the receivers are installed in both sidewalls. New migration technique was applied to an in-situ tunnelling site. The 3-dimensional migration was performed using measured TSP data and its results were compared with the geological investigation results that were monitored during tunnel construction. This comparison revealed that the proposed migration technique could reconstruct the discontinuity planes reasonably well.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.1
• /
• pp.1-13
• /
• 2022

A weighted linear combination of seismic fragility models previously developed for cut-and-cover railway tunnels was presented and the appropriateness of the combined model was evaluated. The seismic fragility function is expressed in the form of a cumulative probability function of the lognormal distribution based on the peak ground acceleration. The model uncertainty can be reduced by combining models independently developed. Equal weight is applied to four models. The new seismic fragility function was developed for each damage level by determining the median and standard deviation, which are model metrics. Comparing fragility curves developed for other bored tunnels, cut-and-cover tunnels for high-speed railway system have a similar level of fragility. We postulated that this is due to the high seismic design standard for high-speed railway tunnel.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.1
• /
• pp.47-58
• /
• 2012

Dynamic behaviors of a corrugated steel plate tunnel lining system are examined under wind loads due to passing vehicles. Applied wind loads are simulated by applying the time functions as a vehicle moves through the tunnel. Wind loads are described by the pressure and suction as a vehicle arrives and leaves target positions in the tunnel. The tunnel lining is modeled using the simplified shell elements that retain the characteristics of the corrugated shapes. The displacements of the tunnel lining are evaluated under various conditions regarding wind velocity and the passing vehicles. The responses are found to increase as the vehicle velocity and wind velocity increase. A maximum displacement of 25mm occurs when two vehicles are crossing at the speed of 120km/h. A row of vehicles running consecutively minimally affects the dynamic responses with less than 2.5% of the dynamic responses enlarged and attributed to one running vehicle. It should be noted that the dynamic responses of the tunnel lining should be considered when there is no shotcrete applied.

• Fire Science and Engineering
• /
• v.17 no.3
• /
• pp.50-54
• /
• 2003

The backlayer phenomena of smoke in the road tunnel is evaluated through numerical experiments. A commercial code, PHOENICS is used to simulate smoke flow in the road tunnel. The independent and dependent variables are ventilation air velocity and the length of backlayer of smoke respectively. Hybrid scheme and $textsc{k}-\varepsilon$ turbulence model is adopted in the simulation process and mass residual is used as a convergence criterion. The experimental results say that the length of backlayer is reduced linearly with the increase of ventilating air velocity and that there is a critical air velocity which prevents from the onset of backlayering phenomena. One finds that there is a fresh air region near the bottom of tunnel which could make the passenger escape from the region polluted by smoke. These phenomena come from the severe vertical stratification of the smoke air mixture in the tunnel.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.3
• /
• pp.237-245
• /
• 2004

In designing a tunnel, RMR has been widely used to classify rock mass and to decide the support pattern according to the class of rock mass. However, this RMS system can't help relying on the empirical judgment of engineers who use variables which can be obtained only through consideration of the site conditions. In actuality, it is impossible to consider all the rating factors of RMS when using RMR system at the stage of designing. Therefore, in order to confirm possibility of RMR by use of only the quantitative factors for designing, this paper has done discriminant analysis. Rock strength or RQD has high coefficient of correlation with RMR value, and in consideration of the existing standards for rock mass classification, rock intensity and RQD are important factors for classification of rock mass. Through rock mass classification by the existing RMR system and rock mass classification by the discriminant analysis which has considered two variables only, the discriminant analysis using the rock intensity as an independent variable has shown 74.8% accuracy while the discriminant analysis using RQD as an independent variable has shown 74.3% accuracy. In case of the discriminant analysis which has considered both rock intensity and RQD, it has shown 82.5% accuracy. The existing cases have shown 40.3% accuracy at the stage of designing in which all the RMR factors are considered. It means that at the stage of designing, RMR system can work only with the rock intensity and RQD.

• 한국벤처창업학회:학술대회논문집
• /
• 2008.11a
• /
• pp.337-356
• /
• 2008

2008년 3월 19일 법무부로부터 포이즌 필 도입에 관한 보도 자료가 공시된 시점을 중심으로 국내 비 금융 상장사의 시장반응을 살펴보았다 그 결과 모든 기업에 대해 시장은 부정적인 반응을 보였다. 대주주 지분이 낮을수록 그리고 소액주주 지분이 높을수록 시장의 부정적인 반응은 약화되었다. 한편 재벌기업은 제외하면 독립기업보다. 그룹에 속한 기업들이 더욱 부정적인 시장반응을 보였다. 이는 계열구조가 복잡한 기업일수록 터널링의 가능성이 높기 때문에 그룹기업이 포이즌 필을 도입할 때는 대주주의 사적이익 추구가 강화된다고 시장이 해석하고 있음을 뜻한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.1331-1334
• /
• 2005

6to4 는 IPv6 을 지원하지 않는 IPv4 네트워크에 연결되어 있는 고립된 IPv6 네트워크의 상의 호스트들이 자동 터널링 방식을 통해 순수한 IPv6 네트워크나 6to4 로 구성된 네트워크상의 노드들과 통신할 수 있는 기술이다. 이 기술은 국제 민간 표준화 기구인 IETF 의 NGTrans 워킹 그룹에 의하여 표준화된 IPv6 전환 기술 중에 하나이며 독립적으로 구성된 IPv6 망 간의 통신을 하는 경우에 널리 사용될 것으로 예상이 된다. 본 논문은 IPv6 전환 기술 중 하나인 6to4 를 리눅스 환경에서 구현한 소프트웨어 모듈에 관한 설계 및 운용에 관한 것이다.