• The Journal of the Acoustical Society of Korea
• /
• v.41 no.1
• /
• pp.16-29
• /
• 2022

This paper presents a Doppler shift estimation method and signal processing schemes for Direct Sequence Spread Spectrum (DSSS) transmission to overcome the Doppler shift due to the moving of the underwater communication unit. The proposed method estimates a Doppler shift via 2 step procedures using the preamble with the two 64-length Frank sequences which has a good self-correlation characteristic and is insensitive to the Doppler shift. Furthermore, a packet of DSSS underwater mobile communication and a RAKE receiver are designed using the proposed Doppler shift estimation method. Due to the modulation scheme of the designed DSSS underwater mobile communication using Differential-Quadrature Phase Shift Keying (DQPSK) for the data symbol transmission, the RAKE receiver dose not need a phase tracking and easily makes coherent signals among the combining RAKE branches. The designed RAKE receiving scheme including the proposed Doppler shift estimation method successfully decides information data using the DSSS signal transmitted from the pseudo-moving transmitter with velocity upto about 17.5 m/s.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.5
• /
• pp.446-454
• /
• 2002

This paper presents the Doppler Scanning technique which enables us to detect the relative positions of moving distributed sources using Doppler frequency shift estimate when the moving source consists of distributed sources with different signature frequencies. Doppler frequency shifts of characteristic frequencies of machinery noise sources such as ship's generator and propeller, with tine along CPA (Closest Point of Approach of moving source) are unique, and can be functioned with respect to each source position. Therefore, this technique can be applied to estimate the relative geometrical positions between machinery noise sources. The Extended Kalman Filter (EKF) which has a high frequency resolution with high time resolution, is adopted for improving accuracy of Doppler frequency shift estimate geometric resolution of machinery positions since machinery noise sources show in general low frequency band characteristics with limited spacial distance. The performance of the technique is examined by the numerical simulations and is verified by the experiment using loudspeaker sources on the roof of the car.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.5
• /
• pp.331-339
• /
• 2016

This paper suggests an estimation method of the source signal and the channel impulse response (CIR) using ray-based blind deconvolution (RBD) in the underwater acoustic channel environment where Doppler effect exists by the relative motion between source and receiver. It is difficult to estimate the CIR on Doppler effect by the matched filter with a highly Doppler-sensitive waveform such as the m-sequence signal because Doppler shift can severely degrade the correlation between the received signal corrupted by Doppler effect and the original source signal. In this study, the Doppler-shifted source-signal's phase is estimated using the RBD, and the received signal is compensated by it to obtain the Doppler-corrected CIR. It is verified that using the matched filter with the received signal from the experimental data fails to estimate the CIR while the obtained CIR by the suggested method has the similarity to the propagation path of the ray model. Also, the results show that the reconstructed source signal using the RBD has the better Doppler shift compensation than the Doppler-shifted source signal derived from scattering function.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.487-490
• /
• 2004

OFDM(Orthogonal Frequency Division Multiplexing) 방식의 수중음향 데이터 통신시스템에서 도플러 편이(Doppler Shift)와 도플러 확산(Doppler Spread)의 영향을 완화하여 주파수 효율을 향상시킬 수 있는 수신신호처리 방안을 설계하고 해상에서 송수신 된 시험 데이터의 BER 로써 성능을 평가한다. 도플러 편이를 OFDM 심볼에 부가된 Cyclic Prefix 와 상관계수법을 통해 추정하였으며 도플러 확산에 의해 시간에 따라 변화하는 채널을 Time-Frequency 축상에서 $2\times1D$ MMSE 방식으로 추정한다. 해상실험 결과, $8kHz\~11kHz$ 의 전송대역을 사용 할 때 복호 전 전송률 3098bps, 송수신 소자간 거리 7km, SNR 15dB에서 약 $1\~3\%$의 BER이 추정된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1790-1795
• /
• 2013

The current velocity and turbulence information in each range cell can be obtained from the first and second Doppler spectrum moment estimates. However, the very widely used correlation method often called as the pulse-pair method has the inherent restrictions under the highly turbulent conditions since it does not satisfy the assumptions that the return Doppler spectrum should be symmetric and have a single peak value. Therefore, in this paper, the quality of pulse-pair estimates were compared with that of FFT estimates for problem analysis using various shapes of simulated Doppler spectra. It can be known that the pulse-pair method often yields meaningless results if the received signals are severely biased or multi-peak Doppler spectra in the Doppler frequency domain.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.4
• /
• pp.17-27
• /
• 2003

This paper presents the channel estimation method with STBC applied to IEEE802.11a. Tenacious channel estimation method for OFDM system, that generally uses STTC, has been presented once and massive amount of calculation was needed However, regarding this paper, the amount of calculation can be reduced by using Curve Fitting, and channel tracking performance improvement can be achieved Based on the estimation method, computer simulation was done for the performance analysis and delay spread Doppler frequency and many other group sizes and numbers were considered As a result of the testing, we found out that Doppler frequency deviation effects equally as frequency offset. Also compared to the existing technique, channel estimated performance confirmed that have 0.9dB SNR improvement than old method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.7A
• /
• pp.1152-1161
• /
• 2001

본 논문에서는 이동국 수신 신호의 SINR을 최대화하는 빔 성형 알고리듬을 이용하여, 폐쇄 루프 송신 빔 성형기술을 적용한 순방향 링크 CDMA 시스템에서의 안테나 수, 귀환 채널의 구조, 귀환 지연 등과 시스템 성능과의 상관관계를 연구하였다. 폐쇄 루프 전송 빔 성형에서는 이동국이 각 안테나가 겪는 채널을 추정하여 수신 SINR을 최대화시키는 가중치 벡터를 계산하고, 귀환채널을 통해 가중치 벡터의 양자화된 진폭과 위상정보를 전송한다. 컴퓨터 모의 실험 결과는 송신 안테나가 2개, 3개, 4개로 늘어남에 따라 빔 성형 이득은 단일 송신 안테나와 비교해 $10^{-5}$ BER 근방에서 4.2dB, 5.8dB, 7dB로 증가하지만 양자화 오류에 의한 성능 저하 또한 0.1dB, 0.6dB, 1.3dB로 커지는 것을 보여준다. 또한 순방향 채널의 최대 도플러 주파수가 100Hz일 때에는 귀환 채널을 통한 소신 가중치 벡터를 보다 빠르게 갱신하는 것이 가중치 벡터의 양자화 레벨의 수를 늘여주는 것보다 $10^{-5}$ BER 근방에서 0.6dB 더 좋은 성능을 보이며, 최대 도플러 주파수가 10Hz일 때에는 가중치 벡터의 갱신 속도를 늘이기 보다 양자화 레벨의 수를 늘여주어 정확한 가중치 벡터를 전송하는 편이 0.9dB의 성능 향상을 보인다. 두 전력제어 그룹 길이의 귀환지연으로 인한 성능저하는 채널의 최대 도플러 주파수가 50Hz인 경우가 채널의 최대 도플러 주파수가 100Hz인 경우보다 $10^{-5}$ BER 근방에서 0.3dB 정도 더 작다. 또한 AOS가 3$^{\circ}$인 경우가 AOS가 $10^{\circ}$인 경우보다 $10^{-5}$ BER 근방에서 1.9dB 정도, 주파수 선택적 페이딩 채널이 주파수 비선택적 페이딩 채널보다 $10^{-5}$ BER 근방에서 1dB 정도 귀환 지연으로 인한 성능의 저하가 작다.

• Korean Journal of Remote Sensing
• /
• v.29 no.1
• /
• pp.11-20
• /
• 2013

Space-borne Synthetic Aperture Radar(SAR) has been one of the most effective tools for monitoring quantitative oceanographic physical parameters. The Doppler information recorded in single-channel SAR raw data can be useful in estimating moving velocity of water mass in ocean. The Doppler shift is caused by the relative motion between SAR sensor and the water mass of ocean surface. Thus, the moving velocity can be extracted by measuring the Doppler anomaly between extracted Doppler centroid and predicted Doppler centroid. The predicted Doppler centroid, defined as the Doppler centroid assuming that the target is not moving, is calculated based on the geometric parameters of a satellite, such as the satellite's orbit, look angle, and attitude with regard to the rotating Earth. While the estimated Doppler shift, corresponding to the actual Doppler centroid in the situation of real SAR data acquisition, can be extracted directly from raw SAR signal data, which usually calculated by applying the Average Cross Correlation Coefficient(ACCC). The moving velocity was further refined to obtain ocean surface current by subtracting the phase velocity of Bragg-resonant capillary waves. These methods were applied to Envisat ASAR raw data acquired in the East Sea, and the extracted ocean surface currents were compared with the current measured by HF-radar.

• Bulletin of the Korean Space Science Society
• /
• 2006.04a
• /
• pp.129-132
• /
• 2006

Animal Tracking System consists of Animal Tracking System Receiver on the Satellite segment, Animal Tracking Terminal and Ground Station for data analysis on the Ground segment. This paper describes operation concept and hardware design for Animal Tracking System which is the payload of HAUSAT-2 being developed by the Space System Research Laboratory (SSRL). Algorithms for determination of animal position and data processing are also referred to.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.6
• /
• pp.373-383
• /
• 2012

The performance of underwater acoustic communication system is sensitive to the Doppler shift and ISI(Inter-Symbol Interference). Therefore, the simulation algorithm needs to consider time-spread due to multipath arrivals which cause the ISI, and time-varying Doppler shift along with moving source and receiver. For this purpose, VirTEX(Virtual Time series EXperiment) based on Ray model has been developed. In this paper, VirTEX is used to compare the characteristics of ocean waveguide from the experimental data and illustrate the performance. The CIR(Channel Impulse Response) that characterizes the multipath arrivals with representative time-spread due to multipath arrivals is compared between numerically simulated and experimental probe signal. Also, the communication performance analysis for BER(Bit Error Rate) is compared between numerically simulated and experimental data signal. As a result, VirTEX can be useful as a simulation tool for evaluating the performance of underwater acoustic communication system.