• Polymer Science and Technology
• /
• v.8 no.3
• /
• pp.326-336
• /
• 1997

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.454-459
• /
• 2003

We report the first demonstration of 10 Gb/s wavelength conversion in a Mach-Zehnder interferometric wavelength converter monolithically integrated with a loss-coupled DFB probe source. The integrated device is fabricated using a BRS (buried ridge stripe) structure with an undoped InP clad layer on the top of a passive waveguide to reduce high propagation loss. The device exhibited a static extinction ratio of 11 dB. Good performance at 10 Gb/s is obtained with an extinction ratio of 7 dB and a power penalty of 2.8 dB at a 10$^{-9}$ bit error rate.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1493-1496
• /
• 2005

In this paper, we describe a simple, precise and low cost method of fabricating PDMS stamp for UV embossing. It is important to improve the replication quality of stamp because the accuracy of fabricated structure is related to that of the stamp in UV embossing. The PDMS stamp has been fabricated by the replica molding technology with ultrasonic vibration to eliminate micro-air bubbles during the fabrication process of PDMS stamp. Also, this fabrication to use ultrasonic vibration promotes PDMS solution to fill into micro channel and edge parts. We report the fabrication of an optical core using UV embossing with fabricated PDMS stamp. This fabricated core is $7\;\mu{m}\;at\;depth,\;6\;\mu{m}\;at\;width.\;This\;measured\;value\;has\;the\;difference\;below\;1\;\mu{m}$compared to the original stamp. The surface roughness of core is about 14 nm root mean square. This is satisfactory value to use low-loss optical waveguide. Our successful demonstration of precise replica technology presents an alternative approach for the stamp of UV embossing.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.561-568
• /
• 2017

In order to effectively utilize the Coarse Wavelength Division Multiplexing(CWDM) technology in optical integrated devices, a design of a wavelength selective coupler structure between an optical fiber and an optical waveguide in a flat substrate is can be considered. In this paper, we consider the coupling between a silicon waveguide with an air trench and a single mode fiber. We investigated the tendency of coupling efficiency and its limitations according to the grating depth. For this purpose, the coupling efficiency of coupler structure designed through modeling based on coupled mode theory is predicted and quantitatively compared with simulation results using finite element method.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.205-210
• /
• 2008

Magnetic hysteresis loops of a nickel strip and a Fe-Co alloy strip, which have been used in magnetostrictive strip type guided wave transducers for long range ultrasonic testing of pipelines, were measured and then magnetic property effects of a strip on transducer sensitivity were analyzed. The sensitivity of an optimized Fe-Co strip transducer was superior to that of the nickel strip transducer by a factor of about 30. It was shown that this was mainly attributed to the differences in remanence magnetization and coercivity of the two magnetostrictive materials.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.10
• /
• pp.98-106
• /
• 1998

Efficient power transmission from a single mode fiber to a thin-film waveguide devices is one of the most fundamental and inevitable subject that should be first solved toward the realization of the integrated optic system. In this paper, fiber-waveguide coupling structure is considered and the large mismatch of field profiles at the fiber-waveguide interface is well avoided by using to the coupling guide which is intentionally developed on the top of the thin-film guuide. From the simulation, the taper-type structure are shown to be easier realizeable than the uniform one, since optical coupling between the guides in the latter has a stronger tolerance to the deviation of waveguide parameters.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.11
• /
• pp.23-31
• /
• 2000

In the layered medium, infinite Sommerfeld integral must be evaluated to calculate a space domain Green's function. The complex image method and the two-level method provide rapid calculation and accurate solutions in the near-field region. However, in the intermediate and far-field region, the solutions are inaccurate due to the deformation of the sampling contour. In this paper, we propose a method to calculate an accurate closed-form Green's function for coplanar structure by sampling data on the real axis.

• Korean Journal of Optics and Photonics
• /
• v.12 no.4
• /
• pp.320-326
• /
• 2001

In this paper, we have fabricated asymmetric Y-branch optical power splitters with various optical power splitting ratios by changing the width of one of the output waveguides using $Ag^+-Na^+$ ion change method in BK7 glass. The transmission characteristics of asymmetric Y-branch optical power splitters with different output waveguide width have been investigated using the finitedifference beam propagation method (FD-BPM). We have found the index of the channel waveguide formed by Ag+-Na+ ion change method in BK7 glass and have fabricated channel waveguides to examine the transmission characteristics of channel waveguide. And we have fabricated asymmetric Y-branch optical power splitters with output waveguide width from TEX>$4{\mu}m$ to $6{\mu}m$. /TEX>.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.10
• /
• pp.42-50
• /
• 2000

We show that both cross and bar states with high extinction ratios larger than 30dB can be achieved at eh same ends of ultra-short fused vertical directional coupler switches with two sections by changing the refractive indices of cores and inner cladding layers less than 1%. Based on the calculation of extinction ratios of cross state and bar state for various refractive index and thickness of inner cladding layer and core using the improved coupled mode theory and beam propagation method, the guidelines for design to achieve large tolerances in refractive indices of core and inner cladding layer in fused vertical directional coupler switches are presented.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.2
• /
• pp.1-5
• /
• 2001

We propose an optical performance monitoring method for WDM optical transmission systems. By assigning a pair of AWG ports to each optical signal channel. the optical power, optical signal-to-noise ratio (OSNIO, and wavelength of all the signal channels are observed simultaneously. The output power ratio of the AWG port pair depended on the wavelength variation of the channel with sensitivity of 1dB/0.026nm. The OSNH results were deviated no more than 0.7dB from the results measured by optical signal analyzer (OSA).