• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.500-502
• /
• 2000

BiPbSrCaCuO 계 초전도체에서 관측되는 자기부양효과에 대하여 연구를 수행하였다. BiPbSrCaCuO 계 초전도체에 산화은을 첨가한 시료와 첨가하지 않은 시료의 자기적 특성을 측정하여 자기부양효과의 메카니즘에 대하여 고찰하였다. toroidal자석에서 관측되는 자기부양 효과는 자석의 중심부분에서만 발생하며, 자석의 ring 부분에서는 관측되지 않았다. 이 결과는 본 연구의 자기 부양효과의 발생에는 자석의 형상 및 자속의 분포 형태와 밀접한 관련이 있음을 의미한다.

• Journal of Animal Science and Technology
• /
• v.55 no.3
• /
• pp.195-202
• /
• 2013

The present study was undertaken to investigate the effects of increasing pig market weight on the incidence of the 'caky-fatty' belly, carcass grade and carcass quality traits. To this end, 500 (Yorkshire ${\times}$ Landrace) ${\times}$ Duroc market pigs consisting of equal numbers of barrows and gilts were slaughtered at body weights ranging from 85 to 150 kg and their carcasses were analyzed. Backfat thickness (BFT; mm) of the barrows and gilts regressed on live weight (kg) linearly as follows: BFT (y) = 0.1827x + 3.4825 ($r^2$ = 0.4671) and y = 0.2015x-0.6972 ($r^2$ = 0.4736), respectively. The caky-fatty belly, which, by definition of the present study, had = 55% fat by weight in the dorsal-side half of a 5 cm-wide belly strip between the $11^{th}$ and $12^{th}$ ribs, was found in 10 carcasses from barrows. However, no belly was condemned as 'caky-fatty' by the retailers. Total number of carcasses which were down-graded on account of overweight was as many as 101 (20.2%). The $1^+A$-grade carcasses exhibited a superior intramuscular fat score to all other grades, but except for this and the defective quality traits, no visible differences were found in carcass quality among different carcass grades. In conclusion, the current carcass grading system, which is sparingly reflective of the carcass quality and also under-evaluates the larger but otherwise normal carcasses, may as well be revised. Moreover, the incidence of the caky-fatty belly appears not to be a critical factor to be considered when increasing the pig market weight.

• Journal of the Korean Magnetics Society
• /
• v.6 no.3
• /
• pp.179-188
• /
• 1996

This paper discussed on the impedance analysis of the planar air core inductors having spiral pattern and meander pattern. The width and distance of conductor, and number of turns were varied. As the width of conductor increased, both resistance and inductance decreased and there existed an maximum value in Q for spiral pattern. But Q increased with increasing width of conductor in meander pattern. In spiral pattern, there existed a distance between conductors where inductance became constant and Q became maximum, while the distance between conductors must be as large as possible to obtain large Q because the mutual inductance of meander pattern inductor has negative sign due to opposite current direction at adjacent conductor. Resistance and inductance increased with increasing the number of turns. There existed maximum Q at certain number of turns in spiral pattern. But Q became small in the meander pattern because increase of resistance was larger than increase of inductance with increasing number of turns.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.553-556
• /
• 2003

금속유기물 용액 증착법(MOD)법은 금속유기물 용액을 스핀 코팅하여 고온 열처리를 통해 대면적의 고온 초전도 박막을 만들 수 있으며, 고가의 진공 시스템이 필요하지 않기 때문에 매우 경제적인 박막 증착 방법이다. 본 연구에서는 MOD법을 이용해서 고온초전도체 마이크로파 필터나 터널접합 소자와 같은 전자 소자 응용 연구를 위해 요구되는 높은 임계전류 특성을 갖도록 박막 성장 조건을 변화시켜서 제작된 고온 초전도체 Bi2Sr2CaCu2O8+d (BSCCO2212) 박막을 제작하였다. 박막 특성은 x-ray diffraction (XRD), scanning electron microscope (SEM)으로 표면적, 구조적 특성을 관찰하고 저항-온도 (R-T) 변화 및 전류-전압 (I-V) 특성 측정을 통해 전기적 특성을 연구하여 임계전류를 향상 시킬 수 있는 박막제작 조건에 관해 논의하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.4
• /
• pp.107-116
• /
• 2006

The international standard to determine grounding conductor size can be applied for a wide range of items because it includes the specific physical characteristics, but it has a problem where the numerical formula is complicated. However the JIS and domestic standard numerical formula are simple but have many constraints. The new grounding conductor size selecting method is necessary in order to solve such problems. Therefore, in this study, we suggested an improved method for selecting the grounding conductor size and simple numerical formula with a numerical formula control modeling. and we verified reliability of paper used case study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1669-1676
• /
• 1993

In this paper, a thin-straight monopole antenna attached to a conducting box is analyzed using a moment method with the pocklington integral expression for the exact Green's function. A modeling of a conducting box is based on a Wire-Grid method for an efficient calculation procedure. A system of linear equation is obtained using the piecewise sinusoidal basis function. And a Junction basis function is enforcing to represent the physical current on the edge of the conducting box. Especially, the junction basis functions are overlapped for the current continuity preserving on the vertexes. Numerical results are obtained for the current distribution on the unified antenna/conducting box system, input impedance and radiation pattern. The results are compared with the known data.

• The Korean Journal of Applied Statistics
• /
• v.21 no.1
• /
• pp.53-63
• /
• 2008

It is commonly believed that disease of human or economic traits of livestock are caused not by single gene acting alone, but by multiple genes interacting with one an-other. This issue is difficult due to the limitations of parametric statistical method like as logistic regression for detection of gene effects that are dependent solely on interactions with other genes and with environmental exposures. Multifactor dimensionality reduction (MDR) nonparametric statistical method, to improve the identification of single nucleotide polymorphism (SNP) associated with the Hanwoo(Korean cattle) carcass cold weight, is applied and compared with ANOVA results.

• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.568-573
• /
• 2016

We investigated the charging characteristics of a conducting solid sphere (glassy carbon sphere) comparing with that of a water droplet and check the applicability of the perfect conductor theory. For the systematic research, sphere size, applied voltages, viscosity of the medium were changed and the results were compared with that of corresponding water droplets and the perfect conductor theory. Basically, a glassy carbon sphere follows the perfect conductor theory but the charging amount was lower as much as 70~80% of theoretical prediction value due to oil film formed between electrode and a carbon sphere. We hope this result provides basic understandings on the solid sphere contact charging phenomenon and related applications.

• Superconductivity and Cryogenics
• /
• v.6 no.2
• /
• pp.36-41
• /
• 2004

저항이 없는 초전도체의 특성을 이용한 초전도 시스템의 실용화를 위해서는 운전 온도의 유지비용에 따라 경제성이 좌우된다. 따라서 액체질소 온도에서도 운전이 가능한 고온초전도체를 응용할 수 있다면 초전도 시스템의 실용화를 더욱 앞당기게 될 것이다.(중략)

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.64-67
• /
• 2000

옥내전선의 도체재료로 주로 동(CU)이 사용되고 있으며, 절연재료로는 염소(Cl)를 주성분으로 한 콤파운드가 사용되고 있다. 전선을 장시간 사용하게 되면 전기적, 열적, 기계적, 환경적 요인 등에 의해 열화가 진행되며, 도체 및 절연물의 열분해, 산화, 뒤틀림 등에 의한 특상저하로 전기설비 및 전기기기에 재해를 유발하게 된다.(중략)