• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.886-893
• /
• 2010

This paper considers the problem of time difference-of-arrival(TDOA) source localization when the TDOA and angle of arrival(AOA) measurements from an airborne emitter source are subject to ground-platform sensor position. The optimization of sensors' position is a challenging problem and a solution with good localization accuracy has yet to be found. This paper proposes an estimator that can achieve these purposes and provides optimized sensor position for good localization accuracy using the proposed estimator. The developed algorithm and sensor position are then examined under the special case of a single airborne source. The theoretical developments are supported by simulations.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.361-362
• /
• 2021

본 논문에서는 효율적인 환자 이송 및 치료를 위한 응급구조사와 의료기관 간의 의사소통 및 질 관리를 위한 EC&M (Efficient Communication and Management) 시스템을 제안한다. 이는 관련 앱을 효율적으로 사용하여 응급차 배치부터 병원 도착 시 환자 수속 작업 등을 최소화하고, 각 작업의 수행시간을 최소화 한다. 또한 이 시스템의 사용자는 소방청, 의료기관, 119 응급 구조사이고, 이 중 응급구조사에 초점을 두었다. 이는 PRE-KTAS를 소방청과 의료기관에 동시전달하여 전달된 PRE-KTAS를 통한 적절한 의료기관을 배치하고 선정된 응급의학 전문의에게 직접의료지도를 요청할 수 있다. 그리고 응급구조사는 의무기록활동지를 작성하여 의료기관에 전달하여 내용전달의 효율성을 높인다. 본 논문에서는 시뮬레이션을 통하여 제안하는 응급구조사와 의료기관 간의 정보 공유 시스템은 기존에 제안하는 앱을 사용하지 않고 발생했던 많은 문제를 해결 할 수 있을 것이므로 기존의 앱보다 우수할 것으로 기대된다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.2
• /
• pp.113-127
• /
• 2018

This study develops a fusion priority signal control algorithm to pass without delay in emergency events. Fusion priority signal control is method combined center control with local control. The center control method applies signal times for each signalized intersection on the emergency vehicle's route when an emergency call is received. As signals are controlled before the emergency vehicle leaves for its destination, it is possible to clear the queues at each intersection more effectively. However, since the traffic information (speed, position) of the real-time emergency vehicle is not used, the intersection arrival time predicted by center control and actual arrival time of the emergency vehicle may be different from each other. In the case, it is possible to experience a delay caused by the signal. Local control method operate priority signal use the real-time information of EV, but there is a limitation that queue elimination time can not be reflected. In this study, fusion(center+local) control algorithm is proposed to compensate the disadvantages of center and local control also maximizing its advantages. Proposed algorithm is expected to decrease delay time of EV in emergency situation.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.6
• /
• pp.378-386
• /
• 2017

Accurate distance measurement between maneuver target in underwater and measuring devices is required to perform quantitative test evaluation in marine weapons system R&D process. In general, the target distance is measured using a one-way ToA (Time of Arrival) method that calculates the time difference between transmitted and received signals from the two accurately synchronized devices. However, the distance estimation performance is degraded because of the multi-path environments. In this paper, the time-variant transfer function of complex underwater environment is estimated from each received data frame using RBD (Ray-based Blind Deconvolution), and the estimated time-variant transfer function is then used to get rid of the effect about complex underwater environment and to recover the data signal using PTRM (Passive Time Reversal Mirror). The result from the simulation and experimental data show that the suggested method improve the distance estimation performance when comparing with the conventional ToA method.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.5
• /
• pp.1231-1242
• /
• 1997

This paper deals with an IP mukticast protocol in support of host mobility. Most of the previous multicast schemes have utilized an underlying logical strucuture of network topology,in order to provide a certain degree of order and predictability.On the other hand,mobility implies that a host location relaative to the rest of the net-work changes with time;the physical connectivity of the entire network is thus modified as move.In this case.some multicast datagrams nay not delivered properly,or may delivered twice or more,to a mobile host because the destinations will keep moving whlist datagrams are dekivered with different time delay.This paper first describes the relation between host mobility and multicast, by exploring the possible interactions,and presents a multicast scheme in support of Internet host mobility.A revised scheme is then proposed to adapt the multicast semantic and to optimize the communication overhead.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.1-13
• /
• 2020

In the event of fire, it is necessary to put out the fire within a golden time to minimize personal and property damages. To this end, it is necessary for fire engines to arrive at the site quickly. This study established a fire engine travel time estimation model to secure the golden time by identifying road and environmental factors that influence fire engine travel time in the case of fire by examining data on fire occurrence with GIS DB. The study model for the estimation of fire engine travel time (model 1) covers variables by applying correlation analysis and regression analysis with dummy variables and predicts travel time for different types of places where fire may occur (models 2, 3, 4). Analysis results showed that 17 siginificant independent variables are derived in model 1 and the fire engine travel time differs depending on the types of places where fire occurs. Key variables(travel distance, number of lane, type of road) that are included commonly in the 4 models were identified. Variables identified in this study can be utilized as indicators for research related to travel time of emergency vehicles and contribute to securing the golden time for emergency vehicles.

• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.19-29
• /
• 2006

The first Japanese pilot-scale $CO_2$ sequestration project has been undertaken in an onshore saline aquifer, near Nagaoka in Niigata prefecture, and time-lapse well logs were carried out in observation wells to detect the arrival of injected $CO_2$ and to evaluate $CO_2$ saturation in the reservoir. $CO_2$ was injected into a thin permeable zone at the depth of 1110m at a rate of 20-40 tonnes per day. The total amount of injected $CO_2$ was 10400 tonnes, during the injection period from July 2003 to January 2005. The pilot-scale demonstration allowed an improved understanding of the $CO_2$ movement in a porous sandstone reservoir, by conducting time-lapse geophysical well logs at three observation wells. Comparison between neutron well logging before and after the insertion of fibreglass casing in observation well OB-2 showed good agreement within the target formation, and the higher concentration of shale volume in the reservoir results in a bigger difference between the two well logging results. $CO_2$ breakthrough was identified by induction, sonic, and neutron logs. By sonic logging, we confirmed P-wave velocity reduction that agreed fairly well with a laboratory measurement on drilled core samples from the Nagaoka site. We successfully matched the history changes of sonic P-wave velocity and estimated $CO_2$ saturation a(ter breakthrough in two observation wells out of three. The sonic-velocity history matching result suggested that the sweep efficiency was about 40%. Small effects of $CO_2$ saturation on resistivity resulted in small changes in induction logs when the reservoir was partially saturated. We also found that $CO_2$ saturation in the $CO_2$-bearing zone responded to suspension of $CO_2$ injection.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6D
• /
• pp.569-575
• /
• 2010

The occupancy based O/D is essential for measuring efficiency of various transportation policies like HOV/HOT lane, ramp metering, and public parking station. There has been many studies on occupancy survey methodology and O/D estimation using TCS (Toll Collection System) data separately. The occupancy O/D estimation methodology using TCS data has not been attempted thus far. An overall process from data collection stage to the occupancy O/D estimation stage has been suggested. Field survey was performed at the northbound Seoul toll station of Gyeongbu Expressway by each 2 hours of AM peak, PM non-peak, PM peak, midnight periods on a day. The process of matching the TCS data and field survey data classified by tollbooth ID, car type/mode, and arrival time was also performed. One typical output of the results showed that the ratio of single occupancy vehicles bounding for Seoul during the AM peak amounted to 60%. With the key output of this study and the specific O/D estimation methodology suggested, the whole centroid-to-centroid occupancy O/D of the country could be available, and then various applications in which the occupancy information is required could be possible.

• Geophysics and Geophysical Exploration
• /
• v.13 no.3
• /
• pp.243-248
• /
• 2010

Two suspicious events, which were claimed as underground nuclear tests by North Korea, were detected in the northern Korean Peninsula on October 9, 2006 and May 25, 2009. The KIGAM and Korea-China Joint seismic stations are distributed uniformly along the boundaries between North Korea and adjacent countries. In this study, the data from broadband stations with the distance of 200 to 550 km from the test site are used to analyze and compare two nuclear tests of North Korea. By comparing the time differences of the Pn-wave arrival times of 1st and 2nd tests at multiple stations, the relative locations of two test sites could be calculated precisely. From the geometrical calculation with the velocity of Pn wave $V_{Pn}$ = 8 km/s, the 2nd test site is estimated to move in the WNW direction from 1st one with the distance of 2 km. Body wave magnitude, mb of the 2nd test, which was announced officially as the network average of 4.5, varies widely with the directional location of stations from 4.1 to 5.2. The magnitude obtained from Lg wave, $m_b$(Lg), shows less variation between 4.3 to 4.7 with the average of 4.6. The moving-window spectra of time traces of 1st and 2nd tests show very similar pattern with different scale level. In addition, the corner frequencies of P wave of 1st and 2nd tests at each station show no or negligible difference. This indicates the burial depths of two tests might be very similar. The relative yield amount of the 2nd test is estimated 8 times larger than that of the 1st from the weighted average of ground-velocity amplitude ratios.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06d
• /
• pp.316-318
• /
• 2006

본 논문에서는 차세대 지능형 교통시스템인 UTIS(Urban Traffic Information System)의 빠른 접속 요구 조건을 만족하기 위한 DLC(Dynamic Limited Contention) 알고리즘을 제안한다. UTIS 네트워크는 고속으로 이동하는 차량에 설치된 모바일 노드와 도로 변에 설치된 노변 기지국으로 구성되며, 이 네트워크를 통해서 IP 데이터 그램의 전송 서비스, 방송 데이터를 실시간으로 전송하는 실시간 전송 서비스 그리고 차량의 위치를 계속적으로 알려 주는 위치 탐색 서비스를 지원한다. 이러한 전송 서비스를 지원하기 위해서 UTIS는 물리 계층과 MAC 계층으로 구성된다. 그러나 UTIS에서는 차량의 고속 이동으로 인해서 셀(cell)간의 핸드오프가 빈번히 발생하고 또한 위치 추적과 방송 서비스와 같은 실시간 전송 서비스를 지원해야 하기 때문에 기존의 802.11 MAC을 사용할 수 없다. 즉 UTIS에서의 빠른 등록 요구 조건을 충족시키기 위해 기존의 802.11에서 사용하는 경쟁(contention) 방식은 비효율적이다. 본 논문에서는 셀 내에 도착하는 노드 수에 따라 경쟁을 하는 그룹의 크기를 동적으로 조절하는 DLC 알고리즘을 제안한다. 기존의 UTIS에서는 그룹 크기를 정적으로 결정하고 모바일 노드는 자신의 주소에 이 정적 그룹 크기로 modulo하여 자신의 속한 그룹을 초기에 계산한다. 기지국이 접속해야하는 그룹을 폴링 메시지로 지정할 때 그 그룹에 속한 모바일 노드들만이 제한적으로 경쟁하게 된다. 이러한 정적인 그룹 크기는 셀 내에의 노드의 숫자와 그룹 크기의 분포를 고려하지 않는 방식으로 비효율적이다. 본 DLC 알고리즘에서는 전 폴링 주기 동안에 경쟁하는 노드의 빈도수를 계속적으로 추적하여 등록 시점에 경쟁하는 그룹의 개수를 동적으로 조절하게 된다. 이러한 방식은 UTIS와 같이 접속 시간이 제한적이고 접속하려는 노드 수가 빠르게 변화하는 환경 하에서 기존의 802.11 MAC 프로토콜과 정적인 그룹 크기 방식에 비해 효율적이다.