• 한국정밀공학회지
• /
• 제15권2호
• /
• pp.170-177
• /
• 1998

The purpose of superconducting magnetic bearing flywheel energy storage system(SMB-FESS) is to store unused nighttime electricity as kinetic energy and convert it to electricity during daytime. The SMB-FESS is proposed as an efficient energy storage system because there is no mechanical problems, such as friction and wear The flywheel over SMB is rotated at a high speed, 50,000rpm. The major source of energy loss in the SMB-FESS is vibration of flywheel. Therefore, the vibration characteristics of SMB-FESS should be identified. In this study, the axial/radial stiffness and damping coefficient of SMB are measured by a vibration test. Natural frequencies and natural modes of flywheel and magnet are analyzed by a finite element method. The modal analysis of system is performed using the modal parameters of each component and the measured stiffness/damping coefficient. So, natural at frequencies and mode shapes of the joined system can be obtained. According to critical speed analysis, the system has two rigid conical modes in the low speed range. Nevertheless, the system has not been affected by the critical speed in the main operating range.

• 보존과학연구
• /
• 통권30호
• /
• pp.189-202
• /
• 2009

Ceramics from Taean shipwreck were studied to investigate the deterioration by soluble salts and desalination pattern according to each ceramic characterization. NaCl crystals were found as a crystal growth on the ceramic microstructure and deteriorated to push off the glaze layer of some Puncheong ware sample. As a result of monitoring the desalination pattern of ceramics for 74days, the earthenware sample with big pores and no glaze removed soluble salts so fast, but Puncheong ware and Whiteware samples removed lots of soluble salts slowly and continuously. Generally, it takes long time to remove soluble salts from porcelains, due to small pores and glaze, but the long-term desalination probably can cause the damage on the surface layer such like glaze. As some soluble salts still remains in the ceramic microstructures after desalination, it is very important to control and keep the relative humidity stable through the proper storage. There are various ceramic deterioration patterns by soluble salts. Therefore, it needs to select the desalination method of ceramics from shipwreck, considering the material characteristics and the production techniques.

• 한국재료학회지
• /
• 제9권2호
• /
• pp.181-187
• /
• 1999

In this study, the effect of residual stress on mechanical strength was investigated with 1 kind of whiteware body and 4 kinds of glazes which are produced in succeeding ceramic art place. Using dipping method, the body was coated for different times in order to manipulate the coating thickness and sintered in the different temperatures ($1200^{\circ}C$, $1250^{\circ}C$, $1300^{\circ}C$, $1350^{\circ}C$) for two thus hours. The sintered bodies were characterized by XRD, EPMA, FEM and UTM in order to study the forming of reaction layer between body and glazes, residual stresses and the effects of residual stresses on mechanical strength of pottery. At $1300{\circ}C$, we obtained maximum density and mechanical strength. By the finite element method, the residual stresses in surface of body were minimum in specific thickness of glazes and the mechanical strength of body in that thickness of glazes showed maximum when the firing temperature was settled.

• 디자인학연구
• /
• 제11권
• /
• pp.110-119
• /
• 1995

우리의 문화적 특성은 어떤 것인가 관심과 노력 그리고 연구는 오늘날까지 문화인류학, 사회학, 예술 등 다양한 분야에서 지속되고 있다. 디자인 분야에서도 마찬가지인데 특히 광고계에서 국적있는 광고, 한국적 과고라는 명제로 많은 크리에이터들이 그 실체를 찾으려 고민하고 있으며 각종 광고사보에 단편적인 글들이 게재되고 이다. 어떤 대상의 특질을 살피기 위해서는 시각(視角)의 중요성이 대두되는데 한 나라의 문화유형도 마찬가지임은 말할 것도 없다. 1994년부터 문화인류학적으로 연구된 유수한 저시로 오늘날까지 일본론의 고전이라할 루드베네딕드의 <국화와 칼>은 서양인의 눈에서 일본을 보고 서양과 비교하여 일본인을 서정적이며 자연을 사랑하는 우수한 민족으로 그리고 있다. 일본인이 쓴 일본에 대해<日本人\ulcorner表現心理>에서 \ulcorner\ulcorner\ulcorner는 "일본만큼 자연을 사랑하는 민족은 없다. 부자연 싫어한다. 자연관, 자주관은 담백, 표백, 무상"이라 쓰고 있다. 우리는 한국의 그림이나 도자기 등의 조형성을 이야기할 때 여백의 미라는 말을 종종한다. 그런데 차후 본 연구에서 다루어지겠으나 다나까이꼬의 그름에 대하여 가메꾸라유사구는 그것을 여백의 미라 하면서 일본적임을 강조하고 있다. 한국과 일본은 문화형성 배경에 있어 유사한 문화적 특질을 공유하고 있는 것은 사실이나 학문적 중립성에서 두 조형성을 비교해볼 때 일본인이 말하는 여백과 한국의 여백, 그리고 일본의 자연적인 것과 우리의 그것은 전연 상이한 것이다. 이렇게 일본과 지정학적으로 가까이 위치하고 있으며 고대사에서는 한 문화를 이루었고 근대사에서는 30여 년간 구체적인 문화를 경험한 한국인의 시각에서 바라본다는 것은 훨씬 근접한 이해에 도움을 줄 수 있을것이라 생각된다. 한국인의 시각에서 일본을 보면 베네딕드나 방하 수의 인식이 얼마나 편견인가 하는 것을 실감하게 된다. 본 연구는 일본의 문화속성 가운데 내재되어 있는 구체적인 조형성을 발굴함으로써 한구그이 조형성으로 필자가 유추하고 있는 '부드러움'이라는 개념을 상대적으로 명확히하고자 하는 데 그 의의가 있다.

• 한국콘텐츠학회논문지
• /
• 제18권1호
• /
• pp.441-451
• /
• 2018

이번 논문의 주요 관점은 코리올리힘(Corioli's force)의 원리와 손끝의 감각을 이용하여 고속회전(RPM)에 의해서 기벽 표면에 흠집을 내어 스트라이프(Stripe)의 질감(texture)을 안쪽에서 외벽으로 밀어 늘리는 방식과 코리올리힘(원심력)의 다변화된 아름답고 다이나믹한 독특한 외벽 질감 표현이 관건인데 이를 코리올리힘 기법이라고 정하였다. 또한 전통적인 옹기(onggi)의 평저굽(Flat Bottom Foot)성형 방식을 전기물레를 이용하여 빠른 회전력으로 원통 안쪽에서 밖으로 밀어 외벽을 늘림과 동시에 바닥의 밑면을 평평하게 굽을 펴는 새로운 방식의 평저굽을 개발하였는데 이러한 기법들을 융합하여 새롭고 현대적이면서 독특한 인테리어 작품을 만드는 것이 목적이다.

• 동아시아식생활학회지
• /
• 제10권6호
• /
• pp.507-513
• /
• 2000

This study was conducted to investigate the shelf life of beef stored in antimicrobial pottery during 12days storage at 4'C and Five kinds of antimicrobial potteries were prepared with antimicrobial materials such as TiO$_2$, Ag (NO$_3$)$_2$, Cu(NO$_3$)$_2$ and Zn(NO$_3$)$_2$. In changes of color during storage, Hunter's L- and b-value of beef were not changed, but Hunter's a-value was low significantly. The pH of beef meats were low at 6 days, but were added from 6 days. TBA value of beef in "A" pottery containing TiO$_2$ 1% and "C" Pottery containing TiO$_2$ 0.5%, Cu(NO$_3$)$_2$ were lower than "B", "D" and "I" pottery. VBN contents of beef in "A", "B", "C", "D" and "I" Pottery stored during 12 days were 9.8, 12.5, 9.3, 11.9 and 13.7mg%, respectively. In changes of total plate count of beef during storage at 4$^{\circ}C$, the antimicrobial activity of "A" and "C" pottery were superior.g storage at 4$^{\circ}C$, the antimicrobial activity of "A" and "C" pottery were superior.ttery were superior.

• 한국세라믹학회지
• /
• 제43권10호
• /
• pp.626-634
• /
• 2006

Ceramics manufacturers in the nation produced more than 5000 tons of ceramics wastes a year increasing industrial waste quantity: However, almost no researches were made to reduce environmental pollution and to recycle waste ware. In this study, white ware scraps that were produced at Icheon, Gyeonggi-do were recycled to make use of them as raw materials of ceramics body and to develop new ceramics body that had economic advantages and good quality. The findings showed that the addition of waste ware had limit of 20 wt% considering molding. The addition of waste ware of 20 wt% to white ware lowered baking temperature of the white ware that was added by waste ware of 20 wt% by 30$^{\circ}C$ than existing white ware, and property values were good, for instance, porosity of 3% in average and water absorptivity of 2% in average, and the bending strength recorded more than 800 kgf/$cm^2$ to be high than that of existing white ware being sold in market. The waste ware could be used to produce new ware body and to recycle resources and to solve environmental problems caused by burial and to improve property of ceramics and to save transportation costs as well as baking costs.

• 한국세라믹학회지
• /
• 제48권3호
• /
• pp.228-235
• /
• 2011

Sintering behavior and lightweight characteristics of porcelain by addition of FAHM (Fly-Ash Hollow Microsphere) were evaluated. Green body of Backja composition (general porcelain) in which FAHM was added(15 and 20 wt%) was made by slip casting method. The green body was sintered at 1270 and $1290^{\circ}C$ and maintained for 1h. The bulk density and linear shrinkage of the sintered body with FAHM (20 wt%) decreased. As the contents of FAHM. increased, mullite and cristobalite phases increased. In the microstructure, FAHM shells remained after sintering, and the generation of mullite fibers around FAHM shells also were confirmed. the weight of porcelain with of 20% FAHM decreased by 40% and residual FAHM shells promoted the mullite of generation in the matrix.

• 한국재료학회지
• /
• 제24권7호
• /
• pp.363-369
• /
• 2014

This is the study on diffusion of ceramic body oxide compounds to glaze. For ceramic bodies, no ferrous oxides contain white ware, celadon, and 3 wt% iron oxides contained white ware was used in this experiment. These ceramic bodies were glazed by transparency glaze, iron oxides contained glaze, and glaze made by pine tree ash that treated in 1240 degree, under reduction condition for an hour. An electron probe microanalyzer(EPMA) was used to study diffusion of oxides and to calculate distance of ceramics bodies. As a result, only iron oxide and magnesium oxide from the body diffused to glaze, and also made a band which shown very thin layer of iron oxide and magnesium oxide between the body and glaze. The densest band of iron oxide formed 100 to $150{\mu}m$ in the glaze, and the densest band of magnesium oxide was found 50 to $100{\mu}m$ in the glaze. Therefore, it could be concluded that iron oxide in the body is diffused to the glaze and it affects the color of glaze, even though iron oxide exists in the glaze. Furthermore, the thickness of the glaze has an effect on the color of celadon.

• 디자인학연구
• /
• 16호
• /
• pp.65-74
• /
• 1996

러시아 전위 예술은 서유럽에서 발생한 새로운 미술사조를 러시아 예술가들이 그들의 전통문화와 접속시켜 독자적인 미술사조로 발전시킨 것에 커다란 의미가 있다. 러시아 혁명이후 사회 개혁에 러시아 전위 예술가들은 적극적으로 동참했다. 그들은 사회주의 사회의 이상 실현을 위해 미술, 영화, 건축, 연극 등 각 장르에서 활동했다. 이러한 새로운 사회에 필요한 전문 기능인력의 양성을 목적으로 Vchuthmas가 설립되었다. 학교의 교육목표는 예술분야(건축, 회화, 조각, 그래픽, 금속, 목공예, 도자기, 텍 스타일 등)의 지도자를 양성하는 것이었다. Vchuthmas에서는 러시아 전위예술가들의 구성주의와 기능주의의 원리에 바탕을 둔 교수법을 통해 학생들을 지도하였으며 이는 독일의 Bauhaus 교육에도 지대한 영향을 주었다.